• Journal of Mechanical Science and Technology
• /
• 제19권6호
• /
• pp.1253-1267
• /
• 2005

Misalignment can be an important problem in the integration of GPS/INS. Observability analysis of the alignment errors in the integration of low-grade inertial sensors and multi-antenna GPS is presented in this paper. A control-theoretic approach is adopted to study the observability of time-varying error dynamics models. The relationship between vehicle motions and the observability of the errors in the lever arm and relative attitude between GPS antenna array and IMU is given. It is shown that alignment errors can be made observable through maneuvering. The change of acceleration makes the components of the relative attitude error that are orthogonal to the direction of the acceleration change observable. The change of angular velocity makes the components of the lever arm error that are orthogonal to the direction of the angular velocity observable. The motion of constant angular velocity has no influence on the estimation of the lever arm.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2002년도 ICCAS
• /
• pp.39.2-39
• /
• 2002

This paper presents adaptive add-on control algorithms for theconventional mode of operation of MEMS z-axis gyroscopes. This scheme is realized by adding an outer loop to a conventional force-balancing scheme that includes a parameter estimation algorithm. The parameter adaptation algorithm estimates the angular rate, identifies and compensates the quadrature error, and may permit on-line automatic mode tuning. The convergence and resolution analysis show that the proposed adaptive add-on control scheme prevents the angular rate estimate from being contaminated by the quadrature error, while keeping ideal resolution performance of a conventional force-balancing scheme.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2008년도 춘계학술대회 논문집
• /
• pp.297-298
• /
• 2008

• Nuclear Engineering and Technology
• /
• 제55권2호
• /
• pp.769-779
• /
• 2023

This paper describes an hp-angular adaptivity algorithm in the discrete ordinates method for Boltzmann transport applications with strong angular effects. This adaptivity uses discontinuous finite element quadrature sets with different degrees, which updates both angular mesh and the degree of the underlying discontinuous finite element basis functions, allowing different angular local refinement to be applied in space. The regular and goal-based error metrics are considered in this algorithm to locate some regions to be refined. A mapping algorithm derived by moment conservation is developed to pass the angular solution between spatial regions with different quadrature sets. The proposed method is applied to some test problems that demonstrate the ability of this hp-angular adaptivity to resolve complex fluxes with relatively few angular unknowns. Results illustrate that a reduction to approximately 1/50 in quadrature ordinates for a given accuracy compared with uniform angular discretization. This method therefore offers a highly efficient angular adaptivity for investigating difficult particle transport problems.

• 대한기계학회논문집
• /
• 제18권6호
• /
• pp.1455-1464
• /
• 1994

A new and efficient algorithm for the integration of the thermal-elasto-plastic constitutive equation is proposed. While it falls into the category of the return mapping method, the algorithm adopts the three point approximation of plastic corrector within one time increment step. The results of its application to a von Mises-type thermal-elasto-plastic model with combined hardening and temperature-dependent material properties show that the accurate iso-error maps are obtained for both angular and radial errors. The accuracy achieved is because the predicted stress increment in a single step calculation follows the exact value closely not only at the end of the step but also through the whole path. Also, the comparison of the computational time for the new and other algorithms shows that the new one is very efficient.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 추계학술대회 논문집
• /
• pp.425-428
• /
• 1997

Effectiveness of corrective machining algorithm is verified experimentally in this paper by performing corrective lapping work to single side and double sides hydrostatic tables. Lapping is applied as machining method. Machining information is calculated from measured motion errors by applying the algorithm, without information on rail profile. It is possible to acquire 0.13pm of linear motion error, 1.40arcsec of angular motion error in the case of single side table, and 0.07pm of linear motion error, 1.42arcsec of angular motion error in the case of double sides table. The experiment is performed by the unskilled person after he experienced a little of preliminary machining. Experimental results show that corrective machining algorithm is very effective, and anyone can improve the accuracy of hydrostatic table by using the algorithm.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 추계학술대회 논문집 학회본부 C
• /
• pp.984-986
• /
• 1998

The volume holographic memory system suffers from the crosstalk noise. We study use of error correction coding(ECC) and angular multiplexing for digital holographic memory(DHM) system. The analog image is encoded to binary images by ECC. Binary images are stored using angular multiplexing in DHM. The retrieved binary images are decoded by ECC. The bit error-rate is measured for perspective of the DHM system.

• 한국항공우주학회지
• /
• 제42권10호
• /
• pp.816-822
• /
• 2014

위성의 각속도를 추정하는 비선형 관측기의 설계방법을 제안한다. SDRE 기법을 이용하여 관측기를 설계하는데, 오차 수렴에 대한 충분조건을 제시하였다. 대수 Riccati 형태의 이 조건은, 비선형 항을 Lipschitz 형태로 변환하고 이에 대한 수렴 조건을 유도하여 구해진다. 이 조건으로부터 관측기의 게인을 구할 수 있으며, 시뮬레이션을 이용하여 제안한 방법을 검증하였다.

• 전자공학회논문지SC
• /
• 제49권1호
• /
• pp.74-79
• /
• 2012

위상배열레이더를 이용한 추적의 성능을 지수화하기 위해서 각도예측 오차공분산행렬의 함수를 이용한 정량화 방법에 대해 검토하였다. 특히, 이 오차공분산행렬의 함수로 최대고유값과 대각합을 이용하여 정량화하는 경우에 대해 안테나 빔조향 손실을 반영한 표적탐지확률을 기준으로 정량화의 일관성을 수치실험을 통해 검토하였다. 이를 통해 추적성능을 표적탐지확률로 기준하는 경우, 대각합이 최대고유값 보다 더 일관성을 갖는 정량화 함수임을 확인하였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.852-857
• /
• 2004

In this paper, an angular self-sensing algorithm is proposed and implemented to a Lorentz force type integrated motor-bearing system. It is based on the principle that the flux linkages of stator windings, calculated from the voltage and torque control current, are the functions of the rotor angle. The tracking angular position error is proven to vanish using the Lyapunov stability method, and the experimental results show that the initial error decays within about 5 seconds. It is found that the resolution of the algorithm remains about 1º over the speed range of 100 to 1000 rpm.