• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2007.11a
• /
• pp.195-203
• /
• 2007

In this paper, an analytic model of sleep model operation in the IEEE 802.16e is investigated. A mobile subscribe. station (MSS) goes to sleep mode after negotiations with the base station (BS) and wakes up periodically for a short interval to check whether there is downlink traffic to it. If the arrival of traffic is notified, an MSS returns to wake mode. Otherwise, it again enters increased sleep interval which is double as the previous one. In order to consider the situation more practically, we propose the sleep mode starting threshold, during which MSS should await packets before it enters the sleep mode. By modifying the M/G/1 with multiple vacations model, energy consumption ratio(ECR) and average packet response time are calculated. Our analytic model provides potential guidance in determining the optimal parameters values such as sleep mode starting threshold, minimal sleep and maximal sleep window.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2006.05b
• /
• pp.233-236
• /
• 2006

Chloride attack and carbonation induced corrosion of reinforcement are those of the main factors which cause the deterioration of concrete structures. The objective of this study is to suggest an analytic model for the prediction of chloride penetration into carbonated concrete, in order to make up for the current codes. Carbonation depth model considering the moisture effect is validated by being compared with the test data and the analytic model on chloride penetration into carbonated concrete is developed. Finally, the corrosion-initiation time has been predicted by the present model, being compared with that by the current code equation. The comparison shows that the current code equation can underestimate the chloride penetration into carbonated concrete in marine atmospheric conditions.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2003.11a
• /
• pp.219-222
• /
• 2003

Substantial experimental and theoretical work exists on the bond characteristics of FRP-concrete adhesive joints. Experimental studies show that the bond strength cannot always increase with an increase in the bond length, and that the ultimate strength is strongly influenced by the concrete strength. To solve this feature, analytic solutions based on fracture mechanics are widely used, and the local shear stress-slip curve with a softening branch is known as more rational model. The analytic solution, however, cannot describe various shapes of model curve. In this study, numerical method using interface element is introduced to express various shapes of model curve. Characteristics of adhesive joint is investigated for the shapes of the model curve and their parameters. And the numerical solutions are compared with the test results of CFRP sheet adhesive joints.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.32A no.8
• /
• pp.107-118
• /
• 1995

Three-dimensional simulator for thermal oxidation process is developed. The simulator is consisted by two individual module, one is analytic-model module and the other is numerical-model module. The analytic-model which uses simple complementary-error function guarantees fast calculation in prediction of multi-dimensional oxidation process. The numerical-model which is based on boundary element method (BEM), has a good accuracy and suitable for various process conditions. The results of this study show that oxide growth is retarded at the corner of hole structure and enhanced at the corner of island structure. These effects are reson of different distribution of oxidant diffusion and mask stress. The utility of models and simulator developed in this study is demonstrated by using it to predict not only traditional shape of LOCOS but also process effects in small geometry.

• Korean Management Science Review
• /
• v.18 no.2
• /
• pp.73-85
• /
• 2001

Recently increasing amount of efforts has been devoted to the improvement of logistics in the marine products industry. Yet, few studios have been conducted on the development of site selection models of marine products centers. This paper Proposes a systematic assessment model for the decision making, which is composed of a set of evaluation criteria and an appropriate evaluation method. In choosing criteria we consider completeness and comprehensiveness to reach a right solution. For more flexibility of the model in the future, this study proposes two sets of criteria according to the size of planned centers. The Analytic Hierarchy Process (AHP) is adopted in this study, since the criteria incorporate both subjective factors and objective factors and the AHP is known effective in the situation. This study then illustrates the model application with plausible alternatives. Finally, a dependency problem in the decision criteria is discussed and the Analytic Network Process (ANP) is recommended, in the context, as e solution method.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.13 no.1
• /
• pp.28-33
• /
• 2013

Spin-torque oscillators (STO) is a new device that can be used as a tunable microwave source in various wireless devices. Spin-transfer torque effect in magnetic multilayered nanostructure can induce precession of magnetization when bias current and external magnetic field are properly applied, and a microwave signal is generated from that precession. We proposed a semi-empirical circuit-level model of an STO in previous work. In this paper, we present a refined STO model which gives more accuracy by considering physical phenomena in the calculation of effective field. Characteristics of the STO are expressed as functions of external magnetic field and bias current in Verilog-A HDL such that they can be simulated with circuit-level simulators such as Hspice. The simulation results are in good agreement with the experimental data.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.10 no.1
• /
• pp.61-65
• /
• 2010

Threshold voltage is one of the most important factors in a device modeling. In this paper, analytical method to calculate threshold voltage for recessed channel (RC) MOSFETs is studied. If we know the fundamental parameter of device, such as radius, oxide thickness and doping concentration, threshold voltage can be obtained easily by using this model. The model predicts the threshold voltage which is the result of 2D numerical device simulation.

• Industrial Engineering and Management Systems
• /
• v.15 no.1
• /
• pp.49-62
• /
• 2016

In this paper, we propose an integrated data envelopment analysis (DEA) and analytic hierarchy process (AHP) methodology in which the information about the hierarchical structures of input-output data can be reflected in the performance assessment of decision making units (DMUs). Firstly, this can be implemented by extending a traditional DEA model to a three-level DEA model. Secondly, weight bounds, using AHP, can be incorporated in the three-level DEA model. Finally, the effects of incorporating weight bounds can be analyzed by developing a parametric distance model. Increasing the value of a parameter in a domain of efficiency loss, we explore the various systems of weights. This may lead to various ranking positions for each DMU in comparison to the other DMUs. An illustrative example of road safety performance for a set of 19 European countries highlights the usefulness of the proposed approach.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.50 no.2
• /
• pp.93-99
• /
• 2001

A new type geometric and mathematical network reduction model is introduced. Large-scale network is analyzed with analytic approach. The graph has many nodes, branches and loops. Circuit equation are obtained from these elements and connection rule. In this paper, the analytic relation between voltage source has a mutual different graphic property. Node-reduction procedure is achieved with this circuit property. Consequently voltage source value is included into the adjacent node-analyzing equation. A resultant model equations are reduced as much as voltage source number. Matrix rank is (n-1-k), where n, k is node and voltage source number. The reduction procedure is described and verified with geometric principle and circuit theory. Matrix type circuit equation can be composed with this technique. The last results shall be calculated by using computer.

• Journal of Technology Innovation
• /
• v.13 no.3
• /
• pp.175-196
• /
• 2005

This Paper examines analytic studies of the evaluation system used for evaluating government-supported R&D Institutes (GSRIs), and designs a new model for analyzing the evaluation system's effectiveness. The analytic models in existing studies use the meta evaluation and balanced scorecard (BSC) models. However, theses studies focused on the structure and elements of the evaluation system for examples, the appropriateness of the elements within the evaluation system and the balance of the evaluation index. Accordingly, the effectiveness of the GSRI evaluation system, that is, the evaluation's influence on GSRI performance improvement was not analyzed. This study uses the institution theory and contingency theory perspectives as related to government organization management to develop an analytical model of GSRI evaluation system effectiveness. The new model proposes an analytical approach for improving the effectiveness of the GSRI evaluation system in an institutionalized environment.