• Title/Summary/Keyword: An Open Type

Search Result 1,227, Processing Time 0.028 seconds

Tolerance Control for the Inner Open-Switch Faults of a T-Type Three-Level Rectifier

  • Lee, June-Seok;Lee, Kyo-Beum
    • Journal of Power Electronics
    • /
    • v.14 no.6
    • /
    • pp.1157-1165
    • /
    • 2014
  • The T-type topology is a three-level topology that has an advantage in terms of its number of switching device and its efficiency when compared to the neutral-point clamped (NPC)-type topology. With the recent increase in the usage of the T-type topology, the interest in its reliability has also increased. Therefore, a tolerance control for a T-type rectifier is necessary to improve the reliability of applications when an open-switch fault occurs. NPC-type rectifiers cannot eliminate input current distortion completely. However, the T-type rectifier is able to restore distorted current. In this paper, a tolerance control for the $S_{x2}$ and $S_{x3}$ open-switch faults of a T-type rectifier is proposed where it is advantageous in terms of efficiency when compared with other tolerance controls. The performance of the proposed tolerance control is verified through simulation and experimental results.

Clinical Evaluation of Mandibular Condyle Fractures (하악 과두 골절 환자의 임상분석)

  • Lim, Hyoung-Sup;Kim, Su-Gwan;Oh, Ji-Su;Jeong, Mi-Ae
    • Maxillofacial Plastic and Reconstructive Surgery
    • /
    • v.34 no.1
    • /
    • pp.53-57
    • /
    • 2012
  • Purpose: This study considered the effects and proper treatments of mandibular condyle fractures by comparing clinical differences and complications according to analysis and treatment plan. Methods: From September 2007 to August 2010, patients who were diagnosed with condylar fracture and monitored for more than 3 months were selected. Cases were divided in a reductive manner and evaluated by type and period of intermaxillary fixation (IMF), status of occlusion and trismus according to the Spiessle/Schroll method. A total 50 patients were examined. Results: The number of the unilateral condyle fractures was 45 and 30 patients had multiple fractures. Type of fracture was categorized by the Spiessle/Schroll method. There were 21 patients with type I, 11 patients with type II, 3 patients with type 3, 10 patients with type V and 5 patients with type VI; there were no patients with a type IV fracture. 11 patients were operated on with open reduction. Among them, 9 patients were type II and 2 patients were type I. For type I patients, an intra-oral approach was conducted with an endoscope and trocar. For 3 of the type II patients, an retromandibular approach was conducted and for the rest of the type II patients, the same approach as type I was used. The periods of IMF were 2.36 weeks (mean) in open reduction group and 2.9 weeks (mean) in closed reduction group and the total mean period is 2.78 weeks. All patients had stable occlusion after removing the IMF. Trismus occurred in 1 patient for open reduction and 5 patients for closed reduction. Facial nerve palsy was observed in one patient postoperatively that resolved after 6 months. Conclusion: In this study, similar prognosis was shown after an open and closed reduction was conducted. Therefore, treatments need to be planned depending on the degree of condyle fracture and the amount of displacement. Additionally, the period of IMF could be shortened with open reduction.

An Analysis about the Transition of Introduction and the Actual Situation of Management in Open-planned Elementary Schools (오픈플랜형 초등학교 도입추이 및 운영실태 분석)

  • Jeong, Joo-Seong;Rieu, Ho-Seoup
    • Journal of the Korean Institute of Educational Facilities
    • /
    • v.16 no.3
    • /
    • pp.49-58
    • /
    • 2009
  • This study is carried out to understand application type and change of learning space and to find out actual situation of management in open planned elementary schools. The twelve elementary schools were selected based on case studies and fundamental data of the agencies performing basic plan, the actual situation of management was studied by interviews of principals and teachers. By the results, open planned elementary schools have been notably reduced after the year of 2004 and corridor expending type was broadly chosen as a plane type for open space. It was also shown that learning space was transformed to the independent type integrating open space to the unit classroom in most part of twelve cases. In addition, whole sliding doors fixed in open classrooms by some Provincial Office of Education didn't need certain physical shut-offs, and it was considered as one of useful alternatives to manage open space.

2-type surfaces with 1-type gauss map

  • Jang, Kyung-Ok;Kim, Young-Ho
    • Communications of the Korean Mathematical Society
    • /
    • v.12 no.1
    • /
    • pp.79-86
    • /
    • 1997
  • It is well-known that a null 2-type surface in 3-dimensional Euclidean space $E^#$ is an open portion of circular cylinder. In this article we prove that a surface with 2-type and 1-type Gauss map in $E^3$ is in fact of null 2-type and thus it is an open portion of circular cylinder.

  • PDF

The Mold Close and Open Control of Injection Molding Machine Using Fuzzy Algorithm

  • Park, Jin-Hyun;Lee, Young-Kwan;Kim, Hun-Mo
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 2005.06a
    • /
    • pp.575-579
    • /
    • 2005
  • In this paper, the development of an IMM(Injection Molding Machine) controller is discussed. Presently, the Mold Close and Open Control Method of a toggle-type IMM is open-loop control. Through the development, a PC based control system was built instead of an existing controller and a closed-loop control replaced the previous control method by using PC based PLC. To control the nonlinear system of toggle type clamping unit, a fuzzy PI control algorithm was selected and it was programmed by an IL(Instruction List) and a LD(Ladder Diagram) on a PC based PLC. The application of fuzzy algorithm as the control method was also considered to change a control object like a mold replacement or an additional apparatus. For the development of an IMM controller, PC based PLC of PCI card type, distributed I/O modules with CANopen and Industrial PC and HMI (Human Machine Interface) software were used.

  • PDF

Operational Characteristics of a Superconducting Fault Current Limiter with an Open Core (개방철심형 고온초전도한류기의 동작 특성)

  • 이찬주;이승제;강형구;김태중;현옥배;고태국
    • Progress in Superconductivity and Cryogenics
    • /
    • v.3 no.1
    • /
    • pp.40-44
    • /
    • 2001
  • Recently. the high-tc superconducting fault col-rent limiters (SFCL) are studied worldwide to be classified as a resistive type or an inductive type such as a magnetic shielding type and a inductive type. The high-tc SFCL wish an open core belongs to the magnetic shielding type SFCL. Unlike conventional magnetic shielding type SFCLS it uses the open core to reduce the mechanical vibrations and installation space, The high-tc SFCL with an open core was designed and manufactured by stacking three BSCCO 2212 tubes. It was tested in the maximum source voltage of 400 Vrms. The results such as the reduction of fault current and impedance of the SFCL are described in this paper. The results show that the fault current in the source voltage of 400 Vrms was reduced to be about 123 Apeak. about 3.9 times greater than the normal state current. Also, the impedance of the high-tc SFCL was about 9${\Omega}$ about 9 times greater than the normal state impedance. The impedance of the SFCL appears just after the fault, and its size is dependent on the source voltage. From the impedance, the inductance of the SFCL was calculated.

  • PDF

ON ATTRACTORS OF TYPE 1 ITERATED FUNCTION SYSTEMS

  • JOSE MATHEW;SUNIL MATHEW;NICOLAE ADRIAN SECELEAN
    • Journal of applied mathematics & informatics
    • /
    • v.42 no.3
    • /
    • pp.583-605
    • /
    • 2024
  • This paper discusses the properties of attractors of Type 1 IFS which construct self similar fractals on product spaces. General results like continuity theorem and Collage theorem for Type 1 IFS are established. An algebraic equivalent condition for the open set condition is studied to characterize the points outside a feasible open set. Connectedness properties of Type 1 IFS are mainly discussed. Equivalence condition for connectedness, arc wise connectedness and locally connectedness of a Type 1 IFS is established. A relation connecting separation properties and topological properties of Type 1 IFS attractors is studied using a generalized address system in product spaces. A construction of 3D fractal images is proposed as an application of the Type 1 IFS theory.

OpenVSLAM-based Cooperative Mobile AR System Architecture (OpenVSLAM 기반의 협력형 모바일 SLAM 시스템 설계)

  • Kook, Joongjin
    • Journal of the Semiconductor & Display Technology
    • /
    • v.21 no.1
    • /
    • pp.136-141
    • /
    • 2022
  • In this paper, we designed, implemented, and verified the SLAM system that can be used on mobile devices. Mobile SLAM is composed of a stand-alone type that directly performs SLAM operation on a mobile device, and a mapping server type that additionally configures a mapping server based on FastAPI to perform SLAM operation on the server and transmits data for map visualization to a mobile device. The mobile SLAM system proposed in this paper is to mix the two types in order to make SLAM operation and map generation more efficient. The stand-alone type SLAM system was configured as an Android app by porting the OpenVSLAM library to the Unity engine, and the map generation and performance were evaluated on desktop PCs and mobile devices. The mobile SLAM system in this paper is an open source project, so it is expected to help develop AR contents based on SLAM in a mobile environment.

A Study on the Significance of Lawn Areas in Urban Parks (공원잔디공간의 녹지구조적 의의에 관한 고찰)

  • 엄붕훈;염두의
    • Journal of the Korean Institute of Landscape Architecture
    • /
    • v.13 no.2
    • /
    • pp.27-36
    • /
    • 1985
  • ^x In Korea, we are entering on a new phase that the use concept of urban park is extending to dynamic activities such as games and sports. This article is to investigate the significance of lawn areas, as a receptive space of such a wide range of recreation activities. As a study process, Green Styles (type of parks) such as Garden Type, Park Type and Forest Type were studied and historical review of lawn areas in park development was performed. In conclusion, the lawn areas ( greensward) are an essential part of park and open space organization. The significance as a conclusion is presented as follows : 1 ) Balance in type of parks The structures of our parks and open spaces are inclined toward the artificial Garden Type and natural Forest Type. Therefore, the intermediate Park Type and sparse wood areas should be a core part of our park and open space development. 2) Psychological effect Park Type areas, thorned by greensward(lawn area), can refresh urban dwellers with natural picturesque landscaps, and Park Type landscape is the most preferred natural landscape. It shows the essence of natural amenity as 3) Accomodation of wide range of recreation activities Lawn areas in urban park are the best place in accomodating the wide range of active and massive recreation activities. Thus, lawn areas can increase the freedom of recreation use in urban park. 4) Enlargement of physical carrying capacity. With expansion of lawn areas of euro- american concept, the structural open space can be transformed into service open space. Thus, the recreation carrying capacity of urban parks can be enlarged.

  • PDF

Study on the Plug/Play Type Open Architecture CNC Technology (Plug/Play 타입의 개방형 CNC 기술 연구)

  • 윤원수;김찬봉;이은애;김세광;오세봉
    • Proceedings of the Korean Society of Precision Engineering Conference
    • /
    • 1997.10a
    • /
    • pp.28-32
    • /
    • 1997
  • This study aims at developing the high speed/intelligent machining system suing the plug/play method of an open architecture controller. The plug/play technology by the Application Specific Function (ASF), can readily implement the open architecture controller into various machining system or other automatic equipments. For the open architecture controller, this study developed the open HMI, screen editor, ASF, visual builder, and controller OS technology as software components. On the other hand, we developed the I/O module and main board as control hardware system. This study, as an example, presents integration of individual component technologies for the plug/play type open architecture CNC system.

  • PDF