• Journal of applied mathematics & informatics
• /
• 제8권1호
• /
• pp.199-212
• /
• 2001

We consider a k-out-of-n system with repair under T-policy. Life time of each component is exponentially distributed with parameter $\lambda$. Server is called to the system after the elapse of T time units since his departure after completion of repair of all failed units in the previous cycle or until accumulation of n-k failed units, whichever occurs first. Service time is assumed to be exponential with rate ${\mu}$. T is also exponentially distributed with parameter ${\alpha}$. System state probabilities in finite time and long run are derived for (i) cold (ii) warm (iii) hot systems. Several characteristics of these systems are obtained. A control problem is also investigated and numerical illustrations are provided. It is proved that the expected profit to the system is concave in ${\alpha}$ and hence global maximum exists.

• 대한산업공학회지
• /
• 제20권1호
• /
• pp.71-85
• /
• 1994

Overhead cranes which carry heavy items in construction or production areas consist of structure and electric modules. More than 80% of breakdowns bring out of the electric module. As operators do not know all about cranes, it sometimes takes much time to repair the cranes. In order to resolve this problem, the expert system which can diagnose causes of faults and give instructions for repair to operators, has been developed. The scope of the paper is limited to the electric module. First of all, analyzing symptoms and causes, we have developed a rule base with the expert system shell, EXSYS. Furthermore, for the facility maintenance including repair instructions against the causes, the instruction data base was developed with FOXPRO. On the other hand, for the help of user's understanding the fault causes, the graphic animation module which shows malfunctioning component ports or motions in 3D was developed with the graphic software, TOPAS VGA.

• 교육시설
• /
• 제16권3호
• /
• pp.41-48
• /
• 2009

The purpose of this research is to find out the problem of plan composition by use the school building. The research was performed through the checking of 13 high schools which were built after 1997 in Busan. Followings are the result of the research. Presently, all the schools are divided classes into different levels and teach students, however, it is only limited to English and Mathematics and being carried on mostly for 1st graders. Moreover, although the plan is composed Department System plan which intended to ues new various learning method, schools have changed their plan into Usual with Variation type which is old educational program and renovated a few classes for certain subjects. Due to above reasons, the new kinds of space for Department System plan is used only as a study room by reform or even not used at all. Therefore, improvement of those problems are significant in schools.

• 한국정보통신학회논문지
• /
• 제16권4호
• /
• pp.737-744
• /
• 2012

최근 VoIP는 IP기반에서 유선과 무선을 이용하여 음성뿐만 아니라 멀티미디어 정보전송을 제공하고 있다. VoIP는 All-IP방식과 Gateway방식과 mVoIP 등이 사용되고 있다. 유무선 VoIP는 네트워크상에서 VoIP 호 제어 신호 및 불법 도청이, 서비스 오용 공격, 서비스 거부 공격의 대상일 뿐만 아니라, WiFi Zone의 무선 인터넷은 무선이 가지고 있는 보안취약점이 존재하다. 따라서 유무선 VoIP에 대한 보안 취약점을 분석하고, 해킹사고에 대한 연구와 보안 대책에 대한 연구가 필요하다. 본 논문에서는 VoIP에 All-IP방식과 Gateway방식의 VoIP시스템과 네트워크에 대한 Scan을 통하여 IP Phone 정보를 획득하고 취약점을 분석한다. 발견된 All-IP방식과 Gateway방식의 VoIP 취약점에 대한 해킹 공격을 실시하여 서비스거부 공격, VoIP 스팸 공격을 실시한다. 그리고 실제 VoIP시스템을 설치 운영하고 있는 현장에서의 조사와 분석을 통해 보안 대책을 제안한다.

• Structural Engineering and Mechanics
• /
• 제83권6호
• /
• pp.799-810
• /
• 2022

This study investigated the effect of the strengthening efficiency of unbonded steel-bar truss system on the out-of-plane behavior of perforated masonry walls. Four full-scale unreinforced masonry (URM) walls with two different planes were prepared using the unbonded steel-bar truss system and a URM walls without strengthening. All masonry walls were tested under constant axial and cyclic lateral loads. The obtained test results indicated that the pinching effect in the out-plane behavior of masonry walls tends to decrease in the in- and out-of-plane strengthened URM walls using the unbonded steel-bar truss system with the higher prestressing force ratio (R_p) of vertical reinforcing bars in the unbonded steel-bar truss system, regardless of the perforated type of the masonry wall. Consequently, the highest maximum shear resistance and cumulative dissipated energy at peak load in the post-peak behavior were observed in the in- and out-plane strengthened URM walls with the highest R_p values, which are 2.7 and 6.0 times higher than those of URM. In particular, the strengthening efficiency of the unbonded steel-bar truss system was primarily attributed to the vertical prestressed steel-bars rather than the diagonal steel-bars, which indicates that the strains in the vertical prestressed steel-bars at the peak load were approximately 1.6 times higher than those in the diagonal steel-bars.

• Restorative Dentistry and Endodontics
• /
• 제23권1호
• /
• pp.110-140
• /
• 1998

One of the problems facing in all modern dental hospitals is the much efforts, manpower and space are needed to effectively sort and stack patients' charts of the various dental departments. In addition, the storage and prompt arrangement of x-ray films is also a problem. Therefore, if dental charts as well as films could be computerized, it would be easier to store and keep them; by data basing, many space, manpower and cost would be saved: data could also be effectively managed for the purpose of academic researches. This would be an epoch -making event in the development of dental hospital management. The purpose of this study is to develop a dental information processing program, that will be used to store dental treatment records and digital image data using a new record media, the optical card. The patients' charts from the dental hospital were selected. The treatment records of the chart were put into the treatment data -recording area of the program, and the digital images of various dental x-ray films were made with a scanner. These data were stored in the optical card and analyzed to get the following results: 1. In this program it is possible to put treatment records and image data into and out from the optical card, and it is impossible to correct and delete all data recorded on the optical card. 2. All data in the optical card system can be searched and analyzed on database. 3. The resolution of image data stored in optical card is above 5.9 lp/mm. 4, All data of dental charts used as samples, stored to optical cards, occupies average 14%, In conclusion, with the development of the storage system using the optical card, a dental patient's life-time treatment record can be stored in one optical card and used as a substitute for the dental chart.

• International Journal of Reliability and Applications
• /
• 제2권4호
• /
• pp.253-262
• /
• 2001

A k-out-of-n standby system is considered where all of its components are s-independent and classified either working or cold standby connected with imperfect switches. The probability density function of the life length for this system is established in closed form, when the underlying components have constant failure rates. Also the reliability function of the system is derived. Finally, the reliability functions for one, two and three out of four systems are deduced for perfect or imperfect switches and identical or non-identical constant failure rates for working and standby components.

• 국제학술발표논문집
• /
• The 6th International Conference on Construction Engineering and Project Management
• /
• pp.28-29
• /
• 2015

The tire production facility is a large-scale construction with the complexity of a manufacturing process. The process utilities should be wide-ranging as an effective arrangement of them is highly important. All the necessary information should be clarified together with the manufacturer at the basic planning stage, and this design should be developed to comply with the local culture and regulations. It is important to carry out more advanced engineering in terms of process, cost and quality, even if it is difficult to standardize due to the cultural and geographical conditions and regulations. The key point is to reflect all the given conditions and make a clear design during the design stage, to eliminate the problems after the construction has begun. Another key point is the delivery system, which must be totally managed from the initial design stage until the construction stage by proven companies. Flexibility, quick action, and single responsibility will be the fundamental features in all the steps of the project.

• 대한안전경영과학회지
• /
• 제20권3호
• /
• pp.1-9
• /
• 2018

This study is intended to look into the effect of construction safety supervision system on risk control and reduction. To achieve this, a survey was carried out to 114 companies in construction, ordering, contract and management. The overall findings were as follows. The effect of construction safety supervision system on risk control and reduction showed that factors of supervision system, supervision cost and supervision method had a positive effect on risk control and reduction. And their perception of the introduction of safety supervision system in construction sites according to process showed that there was a difference between them according to the field of ordering, contract and supervision. There was the biggest difference between owner and contractor in double supervision system, but no difference between them in the perception of risk reduction. These results show that all ordering, contract and supervision are positively needed for the introduction of construction safety supervision. This means that there is a difference between owner and contractor in the perception of process according to system operation. All companies agree to system improvement by the settlement of safety supervision system for the prevention of safety accidents and safe construction, but the systematic complement of safety supervision is the burden of contractor. And there is a big difference between owner and contractor in the perception of responsibility and concern for cost burden.

• International Journal of Computer Science & Network Security
• /
• 제24권3호
• /
• pp.135-141
• /
• 2024

The article examines the key constants of reengineering the modern educational cluster, associated with the processes of digital transformation of all spheres of modern socio-cultural space. The first constant is the strategic rethinking of the educational process organization and awareness of the new roles of all participants (tutors, applicants, controlling elements, etc.). The other constant involves practical re-design of the system of educational services, which consists in the reorientation from the traditional model of education functioning for society to the implementation of the educational format in the form of new projects (structural, target, business). Consequently, the purpose of the study is to highlight the attitudes relevant to the modern realities of information and technological support of education in the context of socio-economic interactions of society. The criteria for the reengineering of educational concepts and the structural organization of the educational sphere are defined. The modern world is going through a period of complete digital transformation of all spheres of public activity. The scientific intelligence notes that education is no exception in these processes, as the dependence of educational realities on information and computer technologies is now noted. The COVID-19 pandemic, for all its tragedy, was also a kind of trigger, clearly marking the new components that have become defined in the organization of the educational process. The conclusion is made that the use of digital technologies in the organization of the educational institution or in the organization of the educational process has become not an auxiliary element, but a dominant factor. Mobility, dynamism, interdisciplinarity, synergy - all these aspects are relevant for socio-economic interactions of society and should be provided by educational programs. The results of the study can be used in the reorganization processes of educational institutions and institutions. Further research requires aspects of the analysis of the foreign experience of reengineering in education, carried out taking into account digital transformations of modern sociocultural space.