• Proceedings of the Korea Information Processing Society Conference
• /
• 2005.05a
• /
• pp.549-552
• /
• 2005

기존의 ANSI C 프로그램은 각각의 플랫폼에 따른 컴파일러를 통해서 목적기계의 코드로 변환되고, 실행되어 플랫폼에 의존적인 단점이 있다. 이러한 단점을 보완하는 방법으로는 스택기반의 가상기계와 가상기계의 입력형태인 중간코드를 이용하는 기법이 있다. EVM(Embedded Virtual Machine)은 ANSI C 언어와 SUN사의 Java 언어 등을 모두 수용할 수 있는 임베디드 시스템을 위한 가상기계이며, SIL(Standard Intermediate Language)은 EVM에서 실행되는 중간언어로 다양한 프로그래밍 언어를 수용하기 위해서 객체지향 언어와 순차적인 언어를 모두 수용하기 위한 연산 코드 집합을 갖고 있다. 본 논문에서는 SIL 코드가 올바른 수행을 하는 것인지를 검증하고 원시코드의 분석을 용이하게 하기 위해서 생성된 SIL 코드를 어셈블리 형태와 유사한 재 표현된 ANSI C 언어로 바꾸는 역컴파일러 시스템을 설계하고 구현하였다.

• Proceedings of the Korean Information Science Society Conference
• /
• 2011.06d
• /
• pp.306-307
• /
• 2011

경합 상황, 교착 상태 등과 같은 동시 프로그램의 오류는 기존의 순차 프로그램에 적용되는 테스팅 방법으로는 탐지 및 재현이 힘들다. 하이젠버그라 불리는 이러한 오류는 프로그램의 안정성 및 신뢰성을 떨어뜨리는 원인이 될 수 있으므로 반드시 탐지하고 재현해야 한다. 본 논문은 SAT-solver와 경합 상태 탐지를 위한 Happens-before 알고리즘을 사용하여 ANSI-C 프로그램 내 존재하는 이러한 오류를 탐지하고 재현할 수 있는 방법을 제안한다.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1995.05b
• /
• pp.883-888
• /
• 1995

본 연구에서 말단선량계에 대한 선량평가시 선량환산인자를 산출하기 위해 1995년의 ANSI N13.32 기준인 “말단선량계의 성능평가를 위한 기준”에서 제안된 기준 팬덤을 가지고 MCNP 전산코드를 이용하여 커마근사법에 의해 수행하였다. ANSI N13.32의 기준팬텀은 손·발 그리고 손가락을 대표하는 원통형으로서 특히 손·발 팬텀에 대해서는 뼈등가물질로 알루미늄을 삽입한 것을 제안함에 따라 본 계산 목적을 위하여 팬텀설계를 똑같이 모사하였으며 사용된 광자빔 에너지는 20keV에서부터 1.5MeV에 걸쳐 14개의 단일에너지를 선택하여 수행하였다. 본 연구에서 전산수행한 결과를 ANSI N13.32의 실험적 결과와 비교해 볼 때 50keV에서부터 1.5 MeV까지의 에너지 영역에서는 최대오차 6% 이내에서 거의 일치함을 보였다.

• Proceedings of the IEEK Conference
• /
• 2003.11c
• /
• pp.3-6
• /
• 2003

Crosstalk among telephone lines in the same bundles is a major impairment in current VDSL systems. In this paper, we analysis the crosstalk effect of DSL using different frequency band upon ANSI standard VDSL systems. Simulation results show that data rate of ANSI VDSL decrease by crosstalk from another VDSL using different frequency. This study has the potential implication and benefit for ANSI standard DMT VDSL energy distribution in subchannel

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.27 no.5
• /
• pp.54-60
• /
• 2013

There is increasing demand for practical groundings for small-area substations because of the recent revision of Korea's Electrotechnical Regulations, which necessitates the method of evaluating their safety. This paper proposes a practical mesh grounding system for 22.9kV substations and studies how to evaluate its safety. The proposed grounding system is proved to obey the safety criteria of ANSI/IEEE Std. 80 via ANSI/IEEE Std. 80 method and computer simulation.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.39 no.1
• /
• pp.75-81
• /
• 2002

In this paper, data rate of VDSL system was analyzed in noise and crosstalk environment. For this paper, Matlab tool was used to analyze the performance of VDSL system. Various "VDSL Test Loop" are used which is suggested by ANSI DSL Standard group T1E1.4. Many parameters, "Noise Model A", "Noise Model F", duplex method VDSL-998 which is suggested FDD plan by ANSI was used. The most of conditions for simulation are followed to the ANSI Standard "Spectrum management" Lots of data have been obtained according to the different conditions of the test loops. The result shows that the data rate of VDSL system is decreased due to the other DSL signals in the same cable bundle. And also there was more reduced data rate in case of Noise Model F than that of Noise Model A.

• Journal of Korean Institute of Industrial Engineers
• /
• v.16 no.1
• /
• pp.1-15
• /
• 1990

An AQL type variables sampling system with switching rules is proposed. Comparative studies of existing variables sampling standards - MIL-STD-414, ANSI Z1.9, ISO 3951, and BS 6002 - are made, and simulation studies on switching procedures are conducted. Based on comparative and simulation studies, a variables sampling standard for Korean industry is proposed. The master sampling tables of the proposed standard are taken from the variables standard ANSI Z 1. 9 and the switching rules are matched to the attributes standard KS A 3109 to enable us to move between the proposed variables standard and KS A 3109. Composite OC and ASN curves of the proposed standard are calculated for selected combinations of lot sizes and AQL's and they are compared with those of ANSI Z1.9.

• Progress in Medical Physics
• /
• v.20 no.4
• /
• pp.253-259
• /
• 2009

We have developed standards based on international criterions for the quality control of dose tested by the measurement institutions of individual exposure doses through improving the reliability of data on the exposure dose of individuals working in radioactive environment and securing the accuracy and reliability of individual dose measurements. Laws related to radiation dose applied to domestic institutions refer to ANSI N13.11.1993, but currently, in U.S. and some other countries the measurement of radiation doses is based on ANSI N13.11.2001 that reduced test categories and tightened the standards. We made efforts to simplify the standards and to reduce the number of dosimeters required in experiment, and avoided preventing or hindering the use of future technologies not approved under the current law such as glass dosimeter and optical stimulation dosimeter. The Quality Management Manual of Radiation Dosimetry Service, Assessment Manual of Radiation Dosimetry Service Accreditation Program, and the Personnel Dosimetry Performance. Criteria for Testing are documents applicable in supervising laboratories.

• Journal of Korea Multimedia Society
• /
• v.13 no.12
• /
• pp.1814-1819
• /
• 2010

Since 1987, when statistical analyzing guide for thermal life test of Accelerated Life Test(ALT) was proposed as ANSI/IEEE Std 101, this guide has been used widely for many experiment data. Shim(2004) had done Monte Carlo simulation to compare life of two different systems or materials, based on statistic values obtained from ANSI/IEEE Std 101 data. In this study, a profile analysis is proposed for comparing life of two different systems or materials, and some examples using pre-existing data are given.

• Proceedings of the KIEE Conference
• /
• 2008.04b
• /
• pp.13-15
• /
• 2008

국내 접지시스템 설계시 가장 널리 사용되는 것은 ANSI/IEEE Std. 80-2000이나 국내 접지설계 환경의 적정성 여부는 검토되고 있지 않다. 따라서, 본 논문에서는 국내 접지설계 환경을 고려한 새로운 접지도체의 굵기 산정방법과 접지도체의 위험전압 산정방법, 접지도체의 Grid간격 산정방법을 적용하여 ANSI/IEEE Std.80-2000을 보완한 새로운 접지시스템 설계 방법을 제시하였다.