• Journal of the Ergonomics Society of Korea
• /
• v.19 no.1
• /
• pp.77-90
• /
• 2000

The aim of this study is to develop and evaluate an efficient camera calibration method for vision-based head tracking. Tracking head movements is important in the design of an eye-controlled human/computer interface. A vision-based head tracking system was proposed to allow the user's head movements in the design of the eye-controlled human/computer interface. We proposed an efficient camera calibration method to track the 3D position and orientation of the user's head accurately. We also evaluated the performance of the proposed method. The experimental error analysis results showed that the proposed method can provide more accurate and stable pose (i.e. position and orientation) of the camera than the conventional direct linear transformation method which has been used in camera calibration. The results of this study can be applied to the tracking head movements related to the eye-controlled human/computer interface and the virtual reality technology.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.21 no.4
• /
• pp.189-195
• /
• 2017

In the seismic design of building structural members, due to the complexity of the placement of PC steels in prestressed concrete members, it is necessary to review and define the definition of member damage in comparison with reinforced concrete members. In this study, the results of past experiments compared with the calculation results by 'section Analysis Method', with the aim of reviewing the precision of calculation results when member damage evaluation is performed using the section analysis method. Furthermore, it is also compared with the calculation results by the 'split Element Method'. In addition, parametric studies were carried out, and the influence of the difference between the amount of PC steels and reinforced bar on the residual strain was examined.

• Steel and Composite Structures
• /
• v.17 no.3
• /
• pp.305-320
• /
• 2014

The lowest critical value of the compressive force acting in the plane of symmetrically laminated quasi-isotropic thin rectangular plates is investigated. The critical buckling loads of plates with different types of lamination and aspect ratios are parametrically calculated. Finite Differences Method (FDM) and Galerkin Method are used to solve the governing differential equation for Classical Laminated Plate Theory (CLPT). The results calculated are compared with those obtained by the software ANSYS employing Finite Elements Method (FEM). The results of Galerkin Method (GM) are closer to FEM results than those of FDM. In this study, the primary aim is to conduct a parametrical performance analysis of proper plates that is typically conducted at preliminary structural design stage of composite vessels. Non-dimensional values of critical buckling loads are also provided for practical use for designers.

• The Mathematical Education
• /
• v.48 no.2
• /
• pp.113-139
• /
• 2009

In this study, we apply the discovery method in the instruction of Permutation and Combination, and examine the effect upon the student's emotion after the instruction change. The research progressed through the instruction by the discovery method for two students of highschool Y. This research has been done for about one and half year from November 2006 to February 2008. We draw our research results through a series of processes consisted of videotaping a classroom activities, recording interview details and writing an observation diary, with the aim of the experimental instruction. In the end, we get to the conclusion that students showed a strong positive attitude on the discovery instructional method and that diverse discovery method has supplementary relation in classwork.

• Journal of the Korea Safety Management & Science
• /
• v.7 no.1
• /
• pp.211-222
• /
• 2005

The ceramic forming materials are getting more important recently since they are used widely in repairing metal structures, welded metal structures and mechanical components etc. The determination of elastic constants for ceramic coating materials takes much time and efforts in experiment due to the brittleness of ceramic material itself. The aim of this research is to determine the Young's Modulus for ceramic metal coating material. In order to achieve the goal, the hybrid method which uses impulse hammer technique for experimental method and modal analysis of finite element method for computational method was used. The results show good agreement with existing experimental data on Young's Modulus.

• Journal of the Ergonomics Society of Korea
• /
• v.31 no.4
• /
• pp.541-550
• /
• 2012

Objective: The aim of this study is to suggest a notation method for three-dimensional hand gesture. Background: To match intuitive gestures with commands of products, various studies have tried to derive gestures from users. In this case, various gestures for a command are derived due to various users' experience. Thus, organizing the gestures systematically and identifying similar pattern of them have become one of important issues. Method: Related studies about gesture taxonomy and notating sign language were investigated. Results: Through the literature review, a total of five elements of static gesture were selected, and a total of three forms of dynamic gesture were identified. Also temporal variability(reputation) was additionally selected. Conclusion: A notation method which follows a combination sequence of the gesture elements was suggested. Application: A notation method for three dimensional hand gestures might be used to describe and organize the user-defined gesture systematically.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2011.05a
• /
• pp.197-199
• /
• 2011

To utilize the Top-Down construction method, it is required to analyse building area, floors, and soil conditions to choose the three basic elements of retaining wall, base column, and floor structure. The purpose of this research is to compare the methods of Top-Down with other construction methods. The research method is to analyse the project conditions of Top-Down project cases. The aim is to develop a method of selecting alternatives, considering construction characteristics, work schedule, supporting methods, foundation types.

• Journal of the Korea Institute of Building Construction
• /
• v.15 no.6
• /
• pp.631-639
• /
• 2015

In the unit modular construction, the unit module prefabricated in a factory with a high level of accuracy does not fit completely onto the ground-joint junction due to the low accuracy of the ground work. This difference in the level of accuracy can cause diverse problems, such as twisting the upper unit modules and loosening the connection between the module and the footing. On this background, the aim of this study is to develop a technique for adjusting the height of the prefabricated individual footing. To accomplish the aim, a height adjustment method using bolts and nuts is proposed, and a shop drawing and the construction sequence are also presented in this study. The structural safety is verified through a structure simulation. In the future, research will be conducted on a mock-up test of the height adjustment method developed in this study, and an analysis of economic feasibility will be performed in order to verify its constructability and usability.

• Structural Engineering and Mechanics
• /
• v.78 no.5
• /
• pp.611-622
• /
• 2021

Composite material-due to low density-causes weight savings, which results in lower fuel consumption of transport vehicles. The aim of the research was to change the existing base-plate of the aluminum airplane container with the composite sandwich plate in order to reduce the weight of the containers of cargo aircrafts. The newly constructed sandwich plate consists of aluminum honeycomb core and composite face-sheets. The face-sheets consist of glass or carbon or hybrid fiber layers. The orientations of the fibers in the face-sheets were 0°, 90° and ±45°. Multi-objective optimization method was elaborated for the newly constructed sandwich plates. Based on the design aim, the importance of the objective functions (weight and cost of sandwich plates) was the same (50%). During the optimization nine design constraints were considered: stiffness, deflection, facing stress, core shear stress, skin stress, plate buckling, shear crimping, skin wrinkling, intracell buckling. The design variables were core thickness and number of layers of the face-sheets. During the optimization both the Weighted Normalized Method of the Excel Solver and the Genetic Algorithm Solver of Matlab software were applied. The mechanical properties of composite face-sheets were calculated by Laminator software according to the Classical Lamination Plate Theory and Tsai-Hill failure criteria. The main added-value of the study is that the multi-objective optimization method was elaborated for the newly constructed sandwich structures. It was confirmed that the optimal new composite sandwich construction-due to weight savings and lower fuel consumption of cargo aircrafts - is more advantageous than conventional all-aluminum container.

• Management & Information Systems Review
• /
• v.33 no.2
• /
• pp.225-239
• /
• 2014

An effect of reward program related to promotional activity has the limitation of being concentrated on a short-term performance or of inducing temporary re-purchase. Accordingly, this study verified the influence of reward method upon consumers' response recovery centering on interactive effects of reward timing and reward intensity, in order to expand a research of dissatisfaction situation. As for the objective of this study, first, the aim is to verify the difference in the influence of economic, non-economic, and combined rewards, which are reward methods of dissatisfaction situation, upon consumers' cognitive response recovery and emotional response recovery. Second, the aim is to confirm a moderating role of reward timing and reward intensity in the effect of consumers' response recovery according to reward methods. To design a research, the perfect factor design between subjects in 3X2X2 was used. As a result of major research, first, there was a difference in the influence upon consumers' response recovery depending on reward methods. Second, the influence of reward method upon consumers' response recovery had a difference depending on reward timing. Third, the influence of reward method upon consumers' response recovery had a difference depending on reward intensity. Consumers' response recovery level was confirmed to have the greatest influence in the combined reward. This study has a significance in newly applying the reward timing, in the dissatisfaction situation which is addressed in the general reward program. Through this study, the aim was to support the empirically analytical results of prior researches and to expand its role in several angles.