• Journal of KIBIM
• /
• v.1 no.1
• /
• pp.26-31
• /
• 2011

Due to the characteristics of 3D objects of building construction projects which have regular, vertical and repetitive shapes, the most practical utilization of BIM in the country is focused on building projects. The characteristics of 3D objects of civil engineering project have irregular, horizontal and non-repetitive shapes. Therefore, consisting of a practical BIM model is difficult comparing with building project. This study suggests an application process of BIM for the planning and design phases for civil engineering project. A BIM system is developed based on suggested BIM process and it is verified through a bridge construction project.

• Korean Journal of Cleft Lip And Palate
• /
• v.6 no.2
• /
• pp.91-105
• /
• 2003

There are significant limitations in the precision of mandibular distraction in setting a desired occlusal and facial esthetic outcome. The purpose of this study is to present the simulation method for the distraction osteogenesis treatment planning. 3-D surgery simulation software programs V-works and V-Surgery(Cybermed, Seoul, Korea) were used from the 3D CT data in addition to the conventional data facial photography, panorama and cephalogram, dental cast model. We have utilized already for the various surgical procedures to get information preoperatively for the maxillofacial surgery like cancer localization and reconstructive surgery, orthognathic surgery and implant surgery in the department of Oral and Maxillofacial surgery, Seoul National University Hospital. On the software, bone cutting can be done at any place and any direction. Separated bone segment can be mobilized in all 3 dimensional direction. After the 3D simulation on the software program, mock surgery on the RP model can be performed. This planning method was applied to two hemifacial microsomia patients. With this protocol, we could simulate the movement of bony segment after maxillofacial distraction osteogenesis

• Korean Management Science Review
• /
• v.33 no.3
• /
• pp.53-64
• /
• 2016

The government is mapping out R&D innovation measures aimed at improving the qualitative level of the performance of national R&D projects that are supported by grants or public funds. This paper proposes ways of making improvements in technology planning, project assessment, performance management, and results evaluation in order to boost the efficiency of the country's promotion of ICT R&D projects, as well as to upgrade the processes involved with its technological innovation system at each of the commercialization stages of its R&D projects. According to our experts' in-depth survey and interview, it has been found that technology planning is the most important phase in the full cycle-based technological innovation system and that the promotion of a combination of top-down and bottom-up approaches is the most reasonable. This paper also suggests it is necessary to secure a process for exploring technological opportunities as the preparatory phase for technology planning, and that it is desirable to reflect the technology demand map associated with the technology road map. Currently, R&D projects are divided into policy designation, designation contest, and free contest. To minimize the inefficiency associated with indiscriminate competition, this paper proposes the introduction of a general contest system in order to change the project assessment system into one based on the results of the competition in each category(e.g. firms, universities, research institutions, etc.).

• Korean Journal of Computational Design and Engineering
• /
• v.9 no.4
• /
• pp.325-333
• /
• 2004

To ensure competitiveness in the modern automotive market, material arrangements and information managements should be performed concurrently with new car developments. In automotive general assembly shops, thus, new business workflow and supporting environments are inevitable to reduce the manufacturing preparation time in developing a new car in the manner of concurrent and collaborative engineering. Since complete material arrangements for a whole general assembly system is a huge and complex job, several planners should execute their planning jobs and share information. Therefore, each planner should provide others with his/her results with continuous on-line communication and cooperation. Digital automotive general assembly factory is useful the performing concurrent and collaborative engineering and is essential for material arrangements and information managements systems. In this research, we constructed a sophisticated digital factory of an automotive general assembly shop by measuring and modeling through the parametric 3-D CAD, and a web-based system for concurrent and collaborative material arrangements for automotive general assembly via 3D mock-up is developed. By the digital general assembly shop and developed web-based system, savings in time and colt of manufacturing preparation activities are possible, and the reliability of the planning result Is greatly improved.

• Spatial Information Research
• /
• v.15 no.3
• /
• pp.279-290
• /
• 2007

The purpose of this study is to find the policy implications for carrying out the 3D GIS in local governments. For this, we made up questions to the local officials related to GIS in local governments and analyzed the questions by the hierarchy of local government. As the result of this, we found that the recognition about 3D GIS concept and the necessity of 3D GIS development was shown at the high rate without the hierarchy, but 3D GIS construction and propulsion was differently shown by the hierarchy. In conclusion, we found it was necessary to develop the 3D GIS with the different approach by the hierarchy of the local government. Especially, the 3D GIS applications has to be focussed on the improvements of the existing GIS in local government. In carrying out the 3D GIS, the support programs considered the local government's peculiarity should have to accompany.

• Journal of Korea Technology Innovation Society
• /
• v.13 no.3
• /
• pp.459-470
• /
• 2010

The aim of this study were to investigate the process of national R&D project planning by using the industry quantitative analysis(especially supply-chain enterprise ananlysis). In the selection process of funding project, the role and significance of the industry analysis can be identified as the effective guideline of using this methodology. Across the study, the following is noted : the factors of R&D effectiveness and R&D necessity are found reliable and valid. On the other hand, the emptiness of supply chain and the positive effect of foreign trade balance did not influence the selection of project. The information gained from this study will help us to define better expectations and industry analysis employing to the National R&D Project Planning.

• Journal of International Society for Simulation Surgery
• /
• v.3 no.1
• /
• pp.22-27
• /
• 2016

Background Craniosynostosis management using distraction osteogensis represent a challenge for surgeons due to the great variability of the skull deformity even within the same etiology. The ability to apply the simulation surgery for improving the preoperative planning for distraction osteogensis could improve the results.Planning and Simulation 14 patients presented with craniosynostosis had been subjected to simulation surgery prior to real surgery. 3D CT scans was obtained upon patient admission. Adjustment of all skull position to Frankfort horizontal plane was done. 3 different distraction osteogensis plans were done for each patient according to the skull morphology. For each plane, movement for each bone segment was done according to the pre-planned distraction vectors. Also the distances of distractions were pre-determined according to the cephalic index as well as brain volume. Intraoperatively, we choose the most appropriate plan for the patient by the surgeon. At the end of distraction, 3D CT scan was obtained, and was compared to the simulation plan. Also the distance and the direction of distraction was compared to that of the plan. Accordingly, the distance was almost matching that of the simulation surgery, however the vector of distraction was not matched.Conclusion Preoperative stimulation planning for craniosynostosis patient is very valuable tool in the surgical management of craniosynostosis patients.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.36 no.4
• /
• pp.105-112
• /
• 2018

This study aims to apply 3D scanning technology to the field of landscape planning design. Through this, 3D scans were conducted on Soswaewon Garden and Seongrakwon Gardens to find directions for traditional landscape planning and designs. The results as follows. First, the actual measurement of the traditional garden through a 3D scan confirmed that a precise three-dimensional modeling of ${\pm}3-5mm$ error was constructed through the merging of coordinate values based on point data acquired at each observation point and postprocessing. Second, as a result of the 3D survey, the Soswaewon Garden obtained survey data on Jewoldang House, Gwangpunggak Pavilion, the surrounding wall, stone axis, and Aeyangdan wall, while the Seongnakwon Garden obtained survey data on the topography, rocks and waterways around the Yeongbyeokji pond area. The above data have the advantage of being able to monitor the changing appearance of the garden. Third, spatial information developed through 3D scans could be developed with a three-dimensional drawing preparation and inspection tool that included precise real-world data, and this process ensured the economic feasibility of time and manpower in the actual survey and investigation of landscaping space. In addition, modelling with a three-dimensional 1:1 scale is expected to be highly efficient in that reliable spatial data can be maintained and reprocessed to a specific size depending on the size of the design. In addition, from a long-term perspective, the deployment of 3D scan data is easy to predict and simulate changes in traditional landscaping space over time.

• Industry Promotion Research
• /
• v.8 no.2
• /
• pp.1-9
• /
• 2023

To bridge the research gap in the area of the Fourth Industrial Revolution, we explore the correlation between the core technologies of the Fourth Industrial Revolution and the economic performance of companies. The results show that the technologies have a statistically significant positive (+) correlation with company sales. The size of the correlation is highest for 3D printing (139%), followed by big data (129%), cloud computing (127%), artificial intelligence (78%), and the internet of things (70%). We also found a statistically significant negative (-) interaction effect between the internet of things and 3D printing, cloud computing and big data, and cloud computing and 3D printing when examining the interaction effect of introducing core technologies of the Fourth Industrial Revolution on company sales. This paper represents an early attempt to examine the correlation between the core technologies of the Fourth Industrial Revolution and the economic performance of companies and may serve as a basis for further empirical research.

• Fashion & Textile Research Journal
• /
• v.17 no.1
• /
• pp.102-115
• /
• 2015

Due to the diversification of lifestyles and the rapid growth of Internet environments since the 1990s, mass customization has been recently accepted as an important trend in the area of clothing and all other areas. In response to mass customized clothing products, global clothing product brands are introducing systems for mass customization such as the application of digital fashion systems that introduced IT technologies such as CAD and 3D scanners. However, studies of planning factors for clothing products applied with digital fashion systems in the area of mass production of clothing products are insufficient. Therefore, this study was intended to analyze the lifestyles of 20-30s that are expected to have the highest demand for clothing applied with digital fashion systems and present basic planning factors according to lifestyles. Through the analysis, three groups that have one of fashion pursuing type, sensory information pursuing type, and practical function pursuing type lifestyles were derived. Based on this result, consumer demand for digital fashion systems and basic factors for product planning were analyzed to present basic planning factors for digital fashion system based customized clothing by lifestyle group. This study is meaningful in that it provided basic data for product planning through digital fashion systems by analyzing the awareness, preference, necessity, and planning factors of digital fashion systems through the analysis of lifestyle types.