• Journal of computational fluids engineering
• /
• v.14 no.3
• /
• pp.63-68
• /
• 2009

The motion of a rising liquid droplet is different that of a bubble motion. Treatment of liquid drops is more complex because internal motion must be considered. A 3D unstructured CFD code has been developed to solve incompressible N-S equation for the droplet simulation. This front-tracking consideration which the interface is tracked explicitly is very available to apply for not only exact interface topology but also the high schmidt number issue, such as $CO_2$ dissolution. This paper is forced on the zig-zag motion of the liquid droplet. The simulation shows that if the rising droplet is located at the corner of the zig-zag path, the velocity is low and shape of the droplet is more spherical shape, results in the less drag coefficient. Twin horse shoe vortexes behind the rising droplet are presented and the topology of the droplet is compared with an experimental result during one period of the path.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.12
• /
• pp.3159-3174
• /
• 1994

A simple octree encoding algorithm based on a tetrahedron root has been developed to be used for fully automatic generation of three dimensional finite element meshes. This algorithm starts octree decomposition from a tetrahedron root node instead of a hexahedron root node so that the terminal mode has the same topology as the final tetrahedral mesh. As a result, the terminal octant can be used as a tetrahedral finite element without transforming its topology. In this part(I) of the thesis, an efficient algorithm for the tetrahedron-based octree is proposed. For this development, the following problems have been solved, : (1) an efficient data structure for storing the octree and finite elements, (2) an encoding scheme of a tetrahedral octree, (3) a neighbor finding technique for the tetrahedron-based octree.

• Proceedings of the KIPE Conference
• /
• 2014.07a
• /
• pp.291-292
• /
• 2014

The three-phase four-leg voltage source inverter (VSI) topology can be an interesting option for the three phase-four wire system. With an additional leg, this topology can achieve superior performance with unbalanced and/or nonlinear load. This paper proposes a new hybrid controller which combines PI controller and resonant controller in synchronous frame for three phase four leg inverter. The hybrid controller is simple in structure and easy to implement. The performance of proposed controller is verified by the experiments and compared with that of the conventional PI controller.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.3
• /
• pp.283-289
• /
• 2015

In this study, the lightweight design of a brake bracket for a composite bogie was studied by considering two brake bracket models with thicknesses of 12t and 9t, respectively. For achieving this goal, finite element analysis and topology optimization were conducted. Firstly, the largest cross-sectional areas of the vertical and horizontal plates of the brake bracket were selected as the design variables. As the constraint, the Z-axis displacement of the brake bracket was increased by 2.5 units from the initial displacement value. The minimum volume fraction of the design regions was chosen as the objective function. The full model comprised a composite bogie frame and brackets attached together. However, to reduce the analysis time, 1D beam elements were used instead of the composite bogie frame by ensuring its equivalence with the full model. The result revealed that the weights of the 12t and 9t models of the brake bracket were reduced to 60 kg and 31 kg, respectively.

• International Journal of Automotive Technology
• /
• v.5 no.3
• /
• pp.189-194
• /
• 2004

The viscoelastic layer material is widely used to control the noise and vibration characteristics of the panel structure. This paper describes the design technology of the effective vibration damping treatment using the concept of the equivalent parameter of viscoelastic layer materials. Applying the equivalent parameter concepts based on theories of shell, it is possible to simulate the finite element analysis of damping layer panel treatments on the vibration characteristics of the structure. And it is achieved the reduced computational cost and the optimal design of topological distribution for the reduction of vibration effect.

• Journal of Korea Spatial Information System Society
• /
• v.11 no.3
• /
• pp.50-54
• /
• 2009

Recently, many researches have been conducted to develop 3D Indoor/Outdoor Spatial Data Models. The 3D data created based on these data models have complex data structures. In order to manage these data efficiently, it is better to use a DBMS. There have been many researches to maintain the 3D data in Geo-DBMS, such that Oosterom (2002) and Arens (2005) developed a method to store 3D Building model, geometric and topological data of coverage in DBMSa. In this study, we propose a method to store the CityGML data into the RDBMS, Oracle Spatial 11g.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.34D no.5
• /
• pp.7-13
• /
• 1997

A X-band 3-stage monolithic LNA (low noise amplifier) with series feedback has been successfully desined and demonstrated by suign 0.5-$\mu\textrm{m}$ GaAs MESFET. In the design of the 3-stage LNA, the effects of series feedback to the noise figure, the gain, and the stability have been investigated ot find the optimal short stub length. As a result, the inductive series feedback topology which has 10degree short stub in the GaAs MESFET source lead, has been employed in the 1-st stage. The fabricated MMIC LNA's chip size is only 1mm$^{2}$/stage, which is smaller than the previously reported X-band MMIC input/output return losses are less than -10dB and -15dB, respectively. The noise figure (NF) is less than 2.6dB. The measured data show good agreement with the simulated values.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.9
• /
• pp.25-34
• /
• 1999

In spite of the advance of 3D solid modeling technology, there are some distinct areas where 2D CAD S/W are still dominant, and more competent comparing with 3D CAD S/W. For example, in the manufacturing of 2D-shaped electrical parts, most related manufacturing tools have 2D geometric features by nature, and 3D solid models applied to these parts have substantial overheads. Nevertheless, most 2D CAD S/W have no topological inquiry services because they have no such information on their geometrical database inherently. Thus, it is needed to extract such information from 2D CAD database for developing more advanced application such as automated drafting/design S/W. In this paper, the extraction of topological information from 2D CAD has been performed in general way using concept of B-rep. A general extraction algorithm, data structure and meta file format for 2D topological object have been developed and successfully applied to the development of the automated lead frame die design system in Samsung Aerospace. it is also possible to provide a flexible, powerful topology-oriented functionality on any common 2D CAD S/W.

• 한국HCI학회:학술대회논문집
• /
• 2009.02a
• /
• pp.163-167
• /
• 2009

3D human body scan technique is known to be practically useful in industrial field as the technique becomes more precise and cheaper. Landmark extraction is essential for full utilization of the scan data. In this paper, we suggest an algorithm for automatic landmark extraction. For this purpose, we perform markerless matching to the target data using PCA analysis and quasi-Newton optimization. Landmarks are extracted from the topology of resulting body.

• Smart Media Journal
• /
• v.5 no.1
• /
• pp.49-54
• /
• 2016

Medical image processing is a compulsory process to diagnose many kinds of disease. Therefore, an automatic algorithm for this task is highly demanded as an important part to construct a computer-aided diagnosis system. In this paper, we introduce an automatic method to segment the liver region from 3D abdominal CT images using Otsu method. First, we choose a 2D slice which has most liver information from the whole 3D image. Secondly, on the chosen slice, we enhanced the image based on its intensity using Otsu method with multiple thresholds and use the threshold to enhance the whole 3D image. Then, we apply a liver mask to mark the candidate liver region. After that, we execute the Otsu method again to segment the liver region from the chosen slice and propagate the result to the whole 3D image. Finally, we apply preprocessing on the frontal side of 3D images to crop only the liver region from the image.