• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.11
• /
• pp.1034-1046
• /
• 2011

In this paper, a design and fabrication of 40 W power amplifier for the X-band using load-pull measurement of GaN HEMT chip are presented. The adopted active device for power amplifier is GaN HEMT chip of TriQuint company, which is recently released. Pre-matched fixtures are designed in test jig, because the impedance range of load-pull tuner is limited at measuring frequency. Essentially required 2-port S-parameters of the fixtures for extraction optimal input and output impedances is obtained by the presented newly method. The method is verified in comparison of the extracted optimal impedances with data sheet. The impedance matching circuit for power amplifier is designed based on EM co-simulation using the optimal impedances. The fabricated power amplifier with 15${\times}$17.8 $mm^2$ shows the efficiency above 35 %, the power gain of 8.7~8.3 dB and the output power of 46.7~46.3 dBm at 9~9.5 GHz with pulsed-driving width of 10 usec and duty of 10 %.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.27 no.5
• /
• pp.445-453
• /
• 2016

This paper presents the implementation and design of the 1T-1R wireless HD video streaming systems over 28 GHz mmWave frequency using 3GPP LTE-TDD standard on NI USRP RIO SDR platform. The baseband of the system uses USRP RIO that are stored in Xilinx Kintex-7 chip to implement LTE-TDD transceiver modem, the signal that are transceived from USRP RIO up or down converts to 28 GHz by using self-designed 28 GHz RF transceiver modules and it is finally communicated HD video data through self-designed $4{\times}8$ sub array antennas. It is that communication method between USRP RIO and Host PC use PCI express ${\times}4$ to minimize delay of data to transmit and receive. The implemented system show high error vector magnitude performance above 25.85 dBc and to transceive HD video in experiment environment anywhere.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.21 no.1
• /
• pp.115-123
• /
• 2018

In this paper, we consider the applicability of time-hopping(TH) systems for anti-jamming(AJ) communication. We first briefly summarize fundamentals of TH systems and several common jamming scenarios that have been considered in the literature. We then analyze the AJ performance of TH systems under those common jamming environments. From our simulation results, we reveal that among narrow band, partial band, broadband, and sweep jamming, partial band and sweep jamming are the best ones from jammer perspective. For the partial band jamming case, we show that the most effective bandwidth ratio and location are 50 % and 2.5-3.5 Ghz, respectively. For the sweep jamming case, we illustrate that the AJ performance of the TH system is enhanced when the sweep duration approaches to the bit duration. In addition, we pointed out that the most efficient jamming bandwidth ratio is 1/2. Finally, our results show that the TH-BPSK system greatly outperforms the TH-PPM counterpart.

• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2000.11a
• /
• pp.61-64
• /
• 2000

We fabricated and characterized Low Noise Amplifier (LNA) using MCM-C (Multi-Chip-Module-Cofired) technology for 2.14 GHz IMT-2000 mobile terminal application. First, We designed LNA circuits and simulated it's high frequency characteristics using circuits simulator. For the simulation, we adopted high frequency libraries of all the devices used in LNA samples. By the simulation, Gain was 17 dB and Noise Figure was 1.4 dB. We used multilayer process of LTCC (Low Temperature Co-fired Ceramics) substrate and conductor, resistor pattern for the MCM-C LNA fabrication. We made 2 buried inductors, 2 buried capacitors and 3 buried resistors. The number of the total layers was 6. On the top layer, we patterned microstrip line and pads for the SMT device. We measured the high frequency characteristics, and the results were 14.7 dB Gain and 1.5 dB Noise Figure.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.10 no.5
• /
• pp.53-59
• /
• 2011

In this paper wideband dipole antenna that is usable as PCS/WCDMA/WiBro/WiMax public relay station antenna is proposed. The proposed antenna that designed by using double ring structure improves bandwidth performance of existing dipole antenna to wideband performance. To verify wideband performance and isotropic radiation pattern of the proposed antenna, simulation and fabrication have progressed its radiation characteristic has measured and then compared with calculated result. Measured result is similar to calculated result and has gain of 2dB VSWR of 2:1 over 1.75~3GHz. It is considered that the dipole antenna that designed in this paper can be usable as PCS/WCDMA/WiBro/WiMax public relay station antenna.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.8 no.5
• /
• pp.1076-1081
• /
• 2007

In this paper, we propose a new switch structure for time division duplex(TDD) system. The existing TDD structure utilizes a circulator fur isolation characteristic between ports. However, the circulator produces intermodulation distortion signals which are undesired signal because of its nonlinear properties. The proposed circuit is composed of a modified branch-line hybrid coupler which controls the signal flow while the isolated port is open-/short- terminated. In order to prove the validity of the presented structure, the switch circuit is fabricated and measured at 2.3GHz, the center frequency of Wibro service system.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.14 no.5
• /
• pp.825-832
• /
• 2011

In this paper, we described the design and measurement results of a Front-End Receiver for S-band active phased array radar. The Front-End Receiver has input P1dB of -4dBm and IIP3 of 7dBm. The measurement results show that gain is $24{\pm}0.7dB$, noise figure are less than 2.3dB over the frequency range of $fc{\pm}0.2GHz$. The Front-End Receiver can protect the receiver path from large input signals with a maximum peak power of multi-kW and recovery time is less than 0.8us. The measurement results satisfy all specifications.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.5 no.4
• /
• pp.817-821
• /
• 2001

In this paper, we design a microstrip patch antenna using 3-dimensional microstrip transition with the VSWR 1.3 over the PCS band (1.75 -1.87 GHz). We study experimentally the effect of the antenna parameters on antenna input impedance. And using the proposed antenna, we fabricate a polarization diversity any antenna and discuss the possibility of antenna for PCS base station.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.11 no.1
• /
• pp.102-109
• /
• 2000

In this paper, a Low Noise Amplifier for B-WLL was designed using the MMIC technology with GaAs PHEMTs fabricated at our lab. The PHEMT for LNA has a $0.35\mu\textrm{m}$ gate and a total gate width of $120\mu\textrm{m}$. The designed MMIC LNA consists of three stages. The first stage of the LNA has a series inductive feedback for obtaining minimum noise and high stability as well. And the designed MMIC LNA has not an interstage matching circuit between the second and the third stage for minimization of the chip size. From simulation results, noise figure and S21 gain of the designed MMIC LNA are 0.85~1.25 dB and 22.08~23.65 dB in the frequency range of 25.5~27.5 GHz respectively. And the chip size is $3.7\times1.6 mm^2$.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.1A
• /
• pp.25-33
• /
• 2003

We derive the outage probabilities for the Erlang capacity and link margin based on handoffs in the reverse link of a CDMA system of 14.4 kbps/1.9 GHz band, calculate them with the same parameters, and then with the maximum realizable Erlang capacity analyze newly the cell coverage in different areas by the COST-231 model If it decreases from 5 % to 2 % in case of $E_b/N_0$=5 dB under a soft handoff, the result shows a very reliable link with additional increment of 0.88 dB in the margin and a high quality of service within the coverage decrease of 0.12 km, 0.25 km, and 1 km in a city, suburban, and open areas respectively on the decrease of 2 Erlang in the capacity. When the $E_b/N_0$ decreases from 7 dB to 5 dB within the outage probability of 5 %, it shows the increase of 9 Erlang and of 0.2 km in a city on the same margin of 2.8 dB. Then, comparing it with a single cell, it shows the decrease of more than 10 Erlang in the capacity, but the enlargement of 0.17 km, 0.3 km, and 1 km in them on the margin decrease of 1.31 dB, also, with a hard handoff, the soft handoff gain of the increase of 10 Erlang and of 0.22 km, 0.5 km, and 2 km on the decrease of 2.16 dB.