• Journal of the Korean Society of Industry Convergence
• /
• v.21 no.6
• /
• pp.409-418
• /
• 2018

In this study, experiments were carried out after fabricating and installing a physical model considering the size of the prototype. In the model test, the number of struts placed on the wall and the applied acceleration were selected as test variables. Two different types of waves, long-period and short-period, were applied with magnitudes of 0.05g, 0.1g, 0.2g, and 0.3g. Measured are displacements at specified points. As a result of the analysis, displacement exceeding the allowable displacement of the wall occurred at an acceleration greater than 0.05g to 0.1g depending on the seismic waves applied. Therefore guidelines have to be established through further studies for aseismic design of earth retaining walls.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.9 no.2
• /
• pp.15-22
• /
• 1984

A deterministic multiproduct, facility-in series multiperiod production planning model is analyzed, where each period demand for the product of a facility appear in a fixed proportion of that for the product of the immediately following facility. The model considers concave production and inventory costs, which can depend upon the production in different facilities. No backlogging is allowed. It is shown that the model is represented via a single source network, which facilitates development of efficient dynamic programming algorithms for computing the optimal production schedule.

• Korean Journal of Ecology and Environment
• /
• v.41 no.1
• /
• pp.43-53
• /
• 2008

This study was conducted to simulate storm hydrographs on a small forested watershed using TOPMODEL, which is a distributed hydrological model. The Myeongseong watershed, which is 58.3 ha in size, was selected to monitor rainfall and runoff data. The Monte Carlo simulation was also used to calibrate parameters of TOPMODEL. Six rainfall-runoff pairs collected at the watershed in the year 1997 were used for parameter calibration, and eight rainfall-runoff pairs collected during the period of $1998\sim1999$ were used for validation effort. The errors of runoff volume ranged from -2.74% to 1.81%, and an average value of model efficiency in terms of runoff volume was 0.92 for the calibration period. The average value of observed peak discharge was $0.324m^3\;s^{-1}$ for six rainfall-runoff pairs, while the prediction value was $0.295m^3\;s^{-1}$. The simulation errors of peak discharge varied according to rainfall characteristics and antecedent condition, within ranges of -27.65% to -1.13%. The model efficiency for the validation period was 0.92. For the validation period, observed peak discharges have an average value of $0.087m^3\;s^{-1}$ and average value of simulated peak discharge was $0.090m^3\;s^{-1}$. Observed and simulated values of time to peak for the calibration period were 18.3 hrs and 11.0 hrs, respectively, and 16.6 hrs and 13.5 hrs, respectively, for the validation period.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.10 no.2
• /
• pp.59-65
• /
• 1990

This study investigates the effects of human impact and precipitation on groundwater flow conditions at a small area in Dejima Upland using a transient three-dimensional simulation. To show the utility of the transient three-dimensional model, the results of the numerical model are compared with those of Theis problem for which analytical solution is available. It appears that over the time period studied, the results of the model agree well with the analytical solution. Simulation is undertaken for a period of 30days starting from May 1st, when irrigation starts. Groundwater flow patterns determined by a numerical model are presented in the form of plotted potential lines and discussed. Results of simulation clearly indicate that the groundwater flow system should be analysed using a transient three-dimensional model, especially for the region which is effected by human impact.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.12 no.7
• /
• pp.3018-3040
• /
• 2018

The mobility model is one of the most important factors that impacts the evaluation of any transportation vehicular networking protocols via simulations. However, to obtain a realistic mobility model in the dynamic urban environment is a very challenging task. Several studies extract mobility models from large-scale real data sets (mostly taxi GPS data) in recent years, but they do not consider the statuses of taxi, which is an important factor affected taxi's mobility. In this paper, we discover three simple observations related to the taxi statuses via mining of real taxi trajectories: (1) the behavior of taxi will be influenced by the statuses, (2) the macroscopic movement is related with different geographic features in corresponding status, and (3) the taxi load/drop events are varied with time period. Based on these three observations, a novel taxi mobility model (T-START) is proposed with respect to taxi statuses, geographic region and time period. The simulation results illustrate that proposed mobility model has a good approximation with reality in trajectory samples and distribution of nodes in four typical time periods.

• Journal of the Korean Society of Industry Convergence
• /
• v.23 no.2_2
• /
• pp.245-254
• /
• 2020

This study investigated the so far little-researched characteristics of the behaviors of rock slopes at the time of an earthquake. For the selection of the rock block, a proper model was formed by applying the similarity in consideration of the roughness and strength of the rock slope(10m) on the site, and shaking table tests were carried out according to seismic excitement acceleration, and seismic waves. In the case of the inclination angle of the joint plane of 20°, the long period wave at 0.3g or more at the time of the seismic excitement surpassed the length of 100mm, the permissible displacement (0.01H, H:slope height), which brought about the collapse of the rock; the short period wave surpassed the permissible displacement at 0.1g, which caused the collapse of the slope. The rock slope was close to a rigid block and a structure more vulnerable to the long period wave than to the short period wave. It collapsed in the short period wave even at the seismic amplitude smaller than the maximum design acceleration in Korea.

• Journal of the Korean Home Economics Association
• /
• v.32 no.5
• /
• pp.55-66
• /
• 1994

The aim of this study is to propose the reasonable method of evaluation on the value of the life-time household work. for homemaker claim her share in the matrimonial property in relation to her life-time household work and to provide the basic data to measuring proper compensation for homemaker and calculating of the donation tax and inheritance tax amount. Tom compare the difference of the method of evaluation on the value of the life-time household work is evaluted by three methods: the model of the life-time household work which is reflected major variables in the FLC frame work marital stage, total marital period. The major findings are as follows: 1) Among the three evaluation me？ The method of Total marital period is evaluatied the lowest value of the life-time household work. 2) The evaluation method of marital stage is more resonable method than the method of total marital period habe a convenience of evaluation but it dos'nt reflected major variables which influence the value of life-time household work. 3) the most resonable method of evaluation on the value of the life-time household work is revealed the model of the life-time household work which is reflected major variables in the FLC frame work the age of first and last offspring marital period.

• Journal of Korean Society for Atmospheric Environment
• /
• v.33 no.1
• /
• pp.11-18
• /
• 2017

The performance of a modeling system consisting of WRF model v3.3 and CMAQ model v4.7.1 for forecasting $PM_{2.5}$ concentrations were evaluated during the period May 2012 through December 2014. Twenty-four hour averages of $PM_{2.5}$ and its major components obtained through filter sampling at the Bulgwang intensive measurement station were used for comparison. The mean predicted $PM_{2.5}$ concentration over the entire period was 68% of the mean measured value. Predicted concentrations for major components were underestimated except for $NO_3{^-}$. The model performance for $PM_{2.5}$ generally tended to degrade with increasing the concentration level. However, the mean fractional bias (MFB) for high concentration above the $80^{th}$ percentile fell within the criteria, the level of accuracy acceptable for standard model applications. Among three bias correction methods, the ratio adjustment was generally most effective in improving the performance. Albeit for limited test conditions, this analysis demonstrated that the effects of bias correction were larger when using the data with a larger bias of predicted values from measurement values.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.14 no.2
• /
• pp.26-30
• /
• 2000

In this paper, we obtain a mathematical model of a gas turbine control system from experimental data. The gas turbine in Gunsan power plant is selected as controlled system. The recursive least square algorithm is used to model the plant. For parameter estimation, plant is assumed as second order system and forgetting factor is 0.98 and the period of input and output signal period is 1sec. As a result, input and output characteristics of real system and modeling are identified.

• Korean Journal of Organic Agriculture
• /
• v.22 no.2
• /
• pp.335-345
• /
• 2014

The productivity decrease in environment-friendly farming is the biggest obstacle for the development of environment-friendly food market. This paper aimed to analyze the productivity change in environment-friendly farming of fruit vegetables (oriental melon, watermelon, and strawberry). Box-Cox transformation model was used to infer the functional form of productivity change. The results showed that the periods of productivity restoration to 90% level in oriental melon, strawberry, and watermelon were 14.1 years, 11.4 years, and 6.0 years, respectively. The forms of productivity restoration of fruit vegetables showed differences due to their growth characteristics, incidences of crop pests, preference for the environment- friendly agricultural products, cultivation period and so on. Because the form and period of productivity restoration were different depending on kinds of fruit vegetable, the government policy should be established considering this point of view.