• Journal of Institute of Control, Robotics and Systems
• /
• v.5 no.6
• /
• pp.744-752
• /
• 1999

In this paper, we studied the response characteristics of $\alpha$, $\beta$ separated type, combined type, PI typed, and feedforward type in 2DOF-PID controller through the simulation and the experiments designed with the multivariable flow control system. The parameters $\alpha$ and $\beta$ give an affect to characteristics of controller in separated type but $\gamma$ does not give an affect to the characteristics of 2-DOF PID. The more $\beta$ increases, the more overshoot decreases and especially, in case of PI type represent clearly. The $\alpha$, $\beta$ separated type has a very small overshoot and its magnitudes in 2-DOF PID onctroller increases in order of $\alpha$, $\beta$ combined type, PI type, feedforward type, conventional type. The response characteristics of simulation are similar to that of experiments but the experimental characteristics in the multivariable flow control system has the delayed response. The time delay of response in experiments depends on 2-DOF parameter $\alpha$, $\beta$, $\gamma$ and the overshoot increase as the $\alpha$, $\beta$, $\gamma$ increase. So, we can have a satisfactory response by tuning D gain.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.48 no.8
• /
• pp.980-986
• /
• 1999

In this paper, the optimal controller which decouples a coupled multivariable system and minimizes a quadratic performance index is proposed. Design of the controller is based on the two-degree-of-freedom standard model. The class of all stabilizing and decoupling controllers is parametrized first and the $H^{2}$optimal controller is obtained by using this parametrized form. An illustrative example for a $2{\times}2$ plant is given.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.33B no.6
• /
• pp.12-22
• /
• 1996

A numerous designs of PI controllers have been suggested to solve out trade-off between tracing and regulating problems. We constructed the PI controller system with two-degree-of-freedom that is more analytic and a better approach to a practical one. In the conventional H$_{2}$ design of optimal PI controllers, the cost function includes only the plant output terms due to the divergent problems. Since the platn input temr is not considered in PI controller design, occasionally, the plant input thends to be either very large or saturated. To solve the prior mentioned problems, we employed a mixed $H_2/H_{\infty}$ method that combines the H$_{2}$ design method to decide optimal parameters of PI controller and the $H_2/H_{\infty}$ design method to minimize the maximum amplitude of plant input. The calculation time of the H$_{infty}$ norm was considerably reduced by the simple scalar function obtained by the wiener-hopf factorization of non-scalar functions.

• Journal of Institute of Control, Robotics and Systems
• /
• v.17 no.7
• /
• pp.697-703
• /
• 2011

This article describes a snake robot with 2-DOF actuator modules. The 2-DOF actuator modules make the snake robot move in the 3D space so that the snake robot can cross obstacles and rough terrain. Each 2-DOF actuator module is designed to have high torque output and an embedded controller. A cross bracket connecting the modules is designed be able to support the weight of two actuator modules. The developed snake robot shows 3-D motions such as side winding, standing/monitoring, and can climb in a narrow pipe with high torque modules. The snake robot moves fast with passive wheels in a plane while crossing obstacles.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 1999.11a
• /
• pp.262-266
• /
• 1999

In this paper, we consider to apply of 2-DOF (Degree of Freedom) PID controller at D.C servo motor system. Many control system use I-PD, PID control system, but the position control system have difficulty in controling variable load and changing parameter. We propose neural network 2-DOF PID control system having feature for removal disturbrances and tracking function in the target value point. The back propagation algorithm of neural network used for tuning the 2-DOF parameter ($\alpha$, $\beta$, ${\gamma}$, η). We investigate the 2-DOF PID control system in the position control system and verify the effectiveness of proposal method through the result of computer simulation.

• Journal of IKEEE
• /
• v.3 no.2 s.5
• /
• pp.250-258
• /
• 1999

This paper presents a decentralized adaptive controller design for a Magnetically Levitated Fine Manipulator to follow the given trajectory as close as possible in spite of coupling effects between motion axes(degree of freedoms or subsystems). The present controller consists of two parts: the model reference controls based on known subsystems and the local adaptive controls. The former stabilizes the motion of the manipulator so as to follow that of the reference model. The latter reduces tracking errors due to coupling disturbances by adjusting the local gains to such levels that override interactions and assure the stability of the overall system. Through several experimental results, it has been shown that the decentralized adaptive control scheme has better tracking performances comparing to the PID controller case as well as good disturbance(coupling) rejection property.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.15 no.3
• /
• pp.139-148
• /
• 2020

This paper is concerned with the H₂ attitude controller design for 3 degree of freedom (DOF) Hover systems with an event-triggered mechanism. The 3 DOF Hover system is an embedded platform for unmanned aerial vehicle (UAV) provided by Quanser. The mathematical model of this system is obtained by a linearization around operating points and it is represented as a linear parameter-varying (LPV) model. To save communication network resources, the event-triggered mechanism (ETM) is considered and the performance of the system is guaranteed by the H₂ controller. The stabilization condition is obtained by using Lyapunov-Krasovskii functionals (LKFs) and some useful lemmas. The effectiveness of the proposed method is shown by simulation and experimental results.

• Proceedings of the KIEE Conference
• /
• 1996.07b
• /
• pp.959-961
• /
• 1996

In this paper, we study the modeling and control of Electro-Magnetic Suspension System with 2 Degree Of Freedom. While the previous researchers considered the control of single rail EMS Systems, we consider the control of two rail EMS Systems. We first derive a simple model to represent the dynamics of EMS System with 2 D.O.F., using the Lagrange's method. The nonlinear equations of motion that we derive are shown to be linearizable by coordinate change and nonlinear static state feedback. The nonlinear static state feedback controller is constructed explicitly.

• Proceedings of the Optical Society of Korea Conference
• /
• 2000.02a
• /
• pp.32-33
• /
• 2000

최근 디지털 정보 처리 기술의 획기적인 발전과 함께 저가의 반도체 레이저의 개발로 말미암아 광기록 장치(optical pickup device) 및 고속 광통신(optical fiber communication)분야에 응용을 위한 레이저 광학 시스템에 대한 연구가 활발하다. 광신호의 커플링(coupling) 및 스위칭(switching)을 기반으로 하는 이러한 광학 시스템은 일반적으로 광신호의 변조를 위한 광학 요소와 광학 요소의 공간적 제어를 위한 정밀 구동기로 구성되는데, 기존의 상용 시스템의 경우에는 독립적으로 기 제작된 광학 요소와 정밀 구동기를 사후에 조립하는 방법으로 소기의 목적을 달성하였다. 이와 같은 경우 제작에 많은 노력과 비용이 요구되며, 성능의 획기적인 향상을 기대하기 어려우므로 최근에는 Optical MEMS 혹은 MOEMS(Micro-Opto-Electro-Mechanical System)로 대변되는 마이크로머시닝기술(micromachining technology)을 이용한 초정밀 광학계의 제작 기술을 통하여 기존 시스템의 한계를 극복하고자 하는 노력이 다각도로 모색되고 있다. (중략)

• Journal of Institute of Control, Robotics and Systems
• /
• v.14 no.9
• /
• pp.948-955
• /
• 2008

The conventional PID controller has been widely employed in industry. However, the PID controller with one degree of freedom(DOF) can not optimize both set-point tracking response and disturbance rejection response at the same time. In order to solve this problem, a few types of 2DOF PID controllers have been suggested. In this paper, a tuning formula for a 2DOF PID controller is presented. The optimal parameter sets of the 2DOF PID controller are determined based on the first-order plus time delay process and a real-coded genetic algorithm(RCGA) such that the ITAE performance criterion is minimized. The tuning rule is then addressed using calculated parameter sets and another RCGA. A set of simulation works are carried out on three processes with time delay to verify the effectiveness of the proposed rule.