• 한국화재소방학회논문지
• /
• 제23권2호
• /
• pp.55-61
• /
• 2009

본 연구에서는 서지나 순간 과전압 등에 의한 과도현상으로부터 보호될 수 있는 높은 신뢰성의 화재수신기가 될 수 있도록 과도현상 보호시스템의 개발에 대한 연구를 수행하였고, 보호시스템의 성능을 시험으로 입증함으로써 과도현상 보호시스템을 개발할 수 있는 기틀을 마련하였다. 과도현상 보호시스템의 개발을 위한 프로세스 정립과 이론을 바탕으로 과도현상으로부터 보호될 수 있는 1단계 및 2단계 보호시스템을 개발하였고, 소방법 및 관련규정에서 제시하는 제반 성능조건으로 시험하고 만족스런 결과를 얻음으로써, 과도현상 보호시스템을 개발할 수 있는 엔지니어링 데이터 구축과 원천기술을 확립하였다.

• 한국화재소방학회논문지
• /
• 제32권4호
• /
• pp.110-121
• /
• 2018

본 논문은 소방용 화학보호복 착용 현장대원의 일상 훈련용 프로토콜 설계 및 활동성 분석에 관한 연구이다. 화학사고 및 화학테러 현장에 최초 투입되는 소방대원들의 대처능력 향상 및 안전성 확보를 위해 총 10단계의 일상 훈련용 프로토콜을 설계하였다. 설계된 프로토콜은 크게 소방용 화학보호복 일상 적응을 위한 광범위 활동 프로토콜(1, 2, 6, 7, 9단계)과 손을 활용한 정밀작업 프로토콜(3, 4, 5단계) 그리고 강한 신체적 부담을 요구하는 프로토콜(8, 10단계)로 구성하였다. 프로토콜에 따른 활동성 측정결과 소방용 화학보호복 착용 시가 미착용 시보다 평균최대심박수는 1단계 20.32%, 2단계 18.69%, 3단계 25.23%, 4단계 34.77%, 5단계 27.44%, 6단계 30.24%, 7단계 25.33%, 8단계 22.25%, 9단계 22.80%, 10단계 20.85% 증가되는 것으로 나타났다. 평균최대호흡수는 1단계 및 2단계를 제외하고 3단계 1.92%, 4단계 4.11%, 5단계 1.24%, 6단계 3.95%, 7단계 0.93%, 8단계 10.23%, 9단계 3.36%, 10단계 15.10% 증가되는 것으로 나타났다.

• 전기학회논문지
• /
• 제60권1호
• /
• pp.43-49
• /
• 2011

A distance relay scheme is commonly used for backup protection. This scheme, called a step distance protection, is comprised of 3 steps for graded zones having different operating time. As for the conventional step distance protection scheme, Zone 2 can exceed the ordinary coverage excessively in case of a transformer protection relay especially. In this case, there can be overlapped protection area from a backup protection relay and, therefore, malfunctions can occur when any fault occurs in the overlapped protection area. Distance relays and overcurrent relays are used for backup protection generally, and both relays have normally this problem, the maloperation, caused by a fault in the overlapped protection area. Corresponding to an IEEE standard, this problem can be solved with the modification of the operating time. On the other hand, in Korea, zones are modified to cope with this problem in some specific conditions. These two methods may not be obvious to handle this problem correctly because these methods, modifying the common rules, can cause another coordination problem. To overcome this problem clearly, this paper describes an improved backup protection coordination scheme using an IEC 61850-based distance relay for transformer backup protection. IEC 61850-based IED(Intelligent Electronic Device) and the network system based on the kernel 2.6 LINUX are realized to verify the proposed method. And laboratory tests to estimate the communication time show that the proposed coordination method is reliable enough for the improved backup protection scheme.

• 한국지열·수열에너지학회논문집
• /
• 제14권3호
• /
• pp.21-28
• /
• 2018

This paper presents two-step simulations to calculate the influence of blast-induced pressures on explosion-protection valves installed at the boundary between a protection facility and a tunnel entering the facility. The first step is to calculate the respective overpressure on the entrance and exit of the tunnel when an explosion occurs near the tunnel entrance and exit to approach the protection facility. Secondly, the blast pressures on the explosion-protection valves mounted to walls located near the tunnel inside approaching the protection facility are analyzed with a 0.1 ms time variation using the results obtained from the first-step calculations. The following conclusions could be derived as a results: (1) The analysis of the entrance tunnel scenario, P1, leads to the maximum overpressure of 47 kPa, approximately a half of the ambient pressure, at the inner entrance due to the effect of blast barrier. For the scenario, P2, the case not blocked by the barrier, the maximum overpressure is 628 kPa, which is relatively high, namely, 5.2 times the ambient pressure. (2) It is observed that the pressure for the entrance tunnel is effectively mitigated because the initial blast pressures are partially offset from each other according to the geometry of the entrance and a portion of the pressures is discharged to the outside.

• 한국산업융합학회 논문집
• /
• 제24권5호
• /
• pp.641-644
• /
• 2021

Wearable devices and IoT are being utilized in various fields, where all systems are developing in the direction of multi-functionality, low power consumption, and high speed. In this paper, we propose a DC -DC Step-down C onverter for IoT smart devices. The proposed DC -DC Step-down converter is composed of a control block of the power supply stage. It also consists of an overheat protection circuit, under-voltage protection circuit, an overvoltage protection circuit, a soft start circuit, a reference voltage circuit, a lamp generator, an error amplifier, and a hysteresis comparator. The proposed DC-DC converter was designed and fabricated using a Magnachip / Hynix 180nm CMOS process, 1-poly 6-metal, the measured results showed a good match with the simulation results.

• Bulletin of the Korean Chemical Society
• /
• 제31권7호
• /
• pp.2061-2064
• /
• 2010

• 한국환경보건학회지
• /
• 제27권1호
• /
• pp.100-105
• /
• 2001

Microstructural examinations were performed on the anaerobic biofilm from reactor filled with PE support media. Optical microscope, SEM and fluorescent microscope were used for qualitative and morphological studies on the attached microorganism under anaerobic condition. Microorganisms were attached in crevices where protection from shear forces of surfaces where easy to contact with support media surface. A hypothesis for biofilm accumulation occurs on a surface such as polymer support media is presented schematically : 1st step ; cell-support media attachment, 2nd step ; cell-support media attachment and cell-cell attachment, 3rd step ; attached biofilm from neighboring crevices joins together and growing, 4th step ; mature and irregualar biofilm was formed. In SEM photographs, shape and structures of biofilm were observed, but microorganism species and methanogens were not identified. A large number of methanogenic bacteria were identified on the surface of PE substratum by fluorescence under 480nm of radiation and it was estimated that methanogenic bacteria was related to initial attachment of bacteria under anaerobic condition.

• 디지털융복합연구
• /
• 제5권1호
• /
• pp.55-68
• /
• 2007

It soaks but 2001 July information communication base step law enforcement and the Enforcement Ordinance are published to follow, in order to support the establishment of evaluation and protective measure in order the vulnerability analysis against the facility of the agency which manages an important information communication base hour opinion to designate information protection specialty enterprise. As information protection specialty enterprise being revealed evacuation laboratory back 12 enterprises from information communication department become designation as the consulting enterprise and they do an enterprise activity actively. It follows in diffusion of the IT and information reconciliation level the other side where our country belongs in the world-wide first group, the research against the disfunction plan of preparation comparison the fact that law it is come negligently all actuality. The network as it will give management coat fatal effect even at obstacle occurrence hour of instant for of case and IT facility of the cyber transactions which leads, in the future there to be to corporate management, there is a possibility the stable civil official of information Facilities for communications very seeing in the portion which is important. Present condition and important propulsion contents of information communication base step law enforcement after, against a vulnerability analysis of information protection relation field and evaluation consulting methodological application situation to sleep it researches from the dissertation which it sees consequently and it does.

• Bulletin of the Korean Chemical Society
• /
• 제33권11호
• /
• pp.3554-3558
• /
• 2012

A new highly stereoselective synthesis of pyrrolidine azasugar 1,4-dideoxy-1,4-imino-D-galacitol is being reported herein. The synthesis was achieved in a linear sequence and inexpensive chiral source (+)-diethyl tartarate was used as the starting material. The key step involved during the synthesis was Pd catalysed amino cyclization of alkenylamine, Bose modified Mitsunobu reaction and Sharpless asymmetric dihydroxylation.

• 전기전자학회논문지
• /
• 제10권2호통권19호
• /
• pp.149-155
• /
• 2006

In this study, the design of low voltage DC-DC converter with low triggering ESD (Electro-Static Discharge) protection circuit was investigated. The purpose of this paper is design optimization for low voltage(2.5V to 5.5V input range) DC-DC converter using CMOS switch. In CMOS switch environment, a dominant loss component is not switching loss but conduction loss at 1.2MHz switching frequency. In this study a constant frequency PWM converter with synchronous rectifier is used. And zener Triggered SCR device to protect the ESD phenomenon was designed. This structure reduces the trigger voltage by making the zener junction between the lateral PNP and base of lateral NPN in SCR structure. The triggering voltage was simulated to 8V.