• Korean Journal of Environmental Agriculture
• /
• v.24 no.1
• /
• pp.56-60
• /
• 2005

In order to increase the storage stability of watermelon stalk, storage environments such as temperature and other treatments such as vaseline, mixture of soybean oil and wheat flour, and coated paper label were tested separately after harvesting. At different storage temperatures (7, 18 and $30^{\circ}C$) shelf-life of stalk was inversely proportional to temperature. The results showed that during storage at $30^{\circ}C$ they were completely wilted in 7 days, at $18^{\circ}C$ in 15 days and at $7^{\circ}C$ in 19 days. Our data also showed that stability of watermelon stalk depending on temperature was very closely correlated with water content of watermelon stalk; during storage at $30^{\circ}C$ the water content of watermelon stalk was decreased to 21.1 % in 7 days, whereas at $7^{\circ}C$ the water content was decreased gradually to 71.2 % for 19 days of storage. In order to reduce the physiological changes in watermelon stalk at $30^{\circ}C$, following treatments such as vaseline, mixture of soybean oil and wheat flour, and coated paper label were tested. As a result, watermelon stalk without any treatment was completely wilted in 9 days, while stalks treated with vaseline and mixture of soybean oil with wheat flour were wilted in 15 and 12 days, respectively. The wilt delay was noted in the watermelon stalk for $3{\sim}6$ days during both treatments but the outward quality was found detracted, whereas when treated with coated paper label, the wilt of stalk was delayed for 3 days along with the improvement in the outward quality. Therefore this data indicate that the treatment of coated paper label during storage at $30^{\circ}C$ can be considered as a potent method for maintaining the physiology of watermelon stalk.

• Journal of Soil and Groundwater Environment
• /
• v.14 no.2
• /
• pp.1-9
• /
• 2009

This study was objected to identify the effect on water quality and contamination by non-agricultural facilities in 'A' reservoir watershed located in OO city, Kyounggi-do, Korea. Ground- and stream water samples showed (Na+K)-Cl, Ca(Cl, SO$_4$) and Ca-Cl type in an illegally discharging area of sewage and a densely industrial area indicating water contamination. Stream water of an illegally discharging area of sewage had high COD, T-N and T-P. In this area, direct incoming of sewage into stream water was induced ground water system by well pumping, and it made a progress of ground water contaminations with those components. Groundwater of a densely industrial area showed high concentrations of T-N, NO$_3$N. From a nitrogen isotope analysis, stream water of an illegally discharging area of sewage has ${\delta}^{15}N-NO_3$values of 0.7%0 was strongly affected by nitrogen originated from agrochemicals, and a densely industrial area of 19.7%0 from septic system. Ground- and stream water of a livestock fanning area were contaminated with NH$_3$-N and Mn, which was affected by intensive livestock facilities. SAR-conductivity plot indicates the water does not pose either alkalinity or salinity hazard for irrigation. COD, T-N, T-P, NO$3$-N, NH$_3$N and Mn concentrations from contaminated areas were diminished by mixing with 'A' reservoir water. There were no water contaminations in silver towns, vacationlands around reservoir and golf links. Consequently, it should be made a plan of systematic managements for past and- present possible contaminants and sewage systems in preventing water contamination by non-agricultural facilities.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.26 no.3
• /
• pp.538-553
• /
• 1999

The purpose of this study was to compare the shear bond strength and the anticariogenicity of glass ionomer cement with conventional bonding resin and fluoride releasing resin. After the shear bond strength test, scanning electron microscopic observation was performed for the evaluation of the fracture patterns in each group. Under the polarizing light microscope, artificially induced carious lesions were evaluated and the lesion depths of the samples were measured using image analyzing program(Image-Pro $PLUS^{TM}$, USA). 50 sound maxillary premolars were used for the bond strength test and another 30 for the anticariogenic test. Data collected were analyzed statistically using Oneway-ANOVA and Scheffe test. The results were as follows: 1. Glass ionomer groups(G-III, IV, V) generally showed the lower bond strength values than resin groups(G-I, II). 2. Among the two resin groups, G-I showed the higher bond strength than G-II without statistically significant difference between them(p>.05). 3. Within glass ionomer groups, statistical significance was found between G-III and G-V with the superior bond strength in G-V (p<.05). 4. Under the SEM, adhesive failure was the predominant fracture pattern in G-I and II, whereas cohesive failures were mainly observed in G-III. In G-IV and V, mixed type of pattern where the both fracture patterns coexisted within samples could be seen. 5. In evaluation of the depth of artificially developed carious lesion, glass ionomer group showed shallower depth than resin groups with statistical significance between G-III and G-I, II(p<.05). Among resin groups, fluoride releasing resin(G-II) showed the shallower depth than conventional resin(G-I)(p<.05).

• Journal of Periodontal and Implant Science
• /
• v.26 no.3
• /
• pp.605-624
• /
• 1996

Various bonegraft materials and the technique of guided tissue regeneration have been used to regenerate lost periodontal tissue. Calcium sulfate has been known as a bone graft material because of good biocompatibility, rapid resorption and effective osteoinduction. It has been known that calcium sulfate works as a binder to stabilize the defect when it is used with synthetic graft materials. The effects on the regeneration of pericxiontal tissue were studied in dogs after grafting 3-wall intrabony defects with calcium carbonate and calcium sulfate and covering with calcium sulfate barrier. The 3-wall intrabony defectstdmm width, 4mm depth, 4mm length) were created in anterior area and treated with flap operation alone(contol group), with porous resorbable calcium carbonate graft alonetexperirnental group 1), with calcium sulfate graft alonetexperimental group 2) and with composite graft of 80% calcium carbonate and 20% calcium sulfate with calcium sulfate barriertexperimental group 3). Healing responses were histologically observed after 8 weeks and the results were as follows: 1. The alveolar bone formation was $0.59{\pm}0.19mm$ in the control group, $1.80{\pm}0.25mm$ in experimental group 1, $1.61{\pm}0.21mm$ in experimental group 2 and $1.94{\pm}0.11mm$ in experimental group 3 with statistically significant differences between control group and all experimental groups(P<0.05). There were statistically significant differences between experimental group 1 and group 2 (P<0.05). 2. The new cementum formation was $0.48{\pm}0.19mm$ in the control group. $1.72{\pm}0.26mm$ in experimental group 1, $1.43{\pm}0.17mm$ in experimental group 2, $1.89{\pm}0.15mm$ in experimental group 3 with statiscally significant differences between control group and all experimental groups (p<0.05). There were statistically significant differences between experimental group 1 and group 2, and between experimental group 2 and group 3(P<0.05). 3. The length of junctional epithelium was $1.61{\pm}0.20mm$ in the contol group, $0.95{\pm}0.06mm$ in experimental group 1, $1.34{\pm}0.16mm$ in experimental group 2, $1.08{\pm}0.11mm$ in experimental group 3 with statiscally significant differences between control group and experimental group 1. and btween control group and experimental group 3(p<0.05). There were statistically significant differences between experimental group 1 ,and group 2, and between experimental group 2 and group 3(P<0.05). 4. The connective tissue adhesion was $1.67{\pm}O.20mm$ in the control group, $1.33{\pm}0.24mm$ in experimental group 1. $1.23{\pm}0.16mm$ in experimental group 2, $1.08{\pm}0.14mm$ in experimental group 3 with statistically significant differences between control group and all experimental groups(p<0.05). There were nostatistically significant differences between all experimental groups. As a result, epithelial migration was not prevented when calcium sulfate was used alone, but new bone and cementum formation were enhanced. Epithelial migration was prevented and new bone and cementum formation were also enhanced when calcium carbonate was used alone and when both calcium carbonate and calcium sulfate were used.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.26 no.2
• /
• pp.296-309
• /
• 1999

Autopolymerized resin facilitates a more rapid and easier means for the construction of removable orthodontic appliances than heat cured resin. But many reports reveal that more unreacted monomer is found in autopolymerized resin. It is very important to achieve maximum degree of polymerization because if polymerization is inadequate, high level of unreacted monomer has been shown to adversely affect mechanical and physical properties, and also the question of allergy or toxicity to methylmethacrylate must be considered. The purpose of this study was to compare the degree of polymerization according to curing method and curing time. Five groups were desinged ; Group 1 was polymerizied at room temperature($28^{\circ}C$) ; Group 2 in $28^{\circ}C$ water ; Group 3 in $28^{\circ}C$ water under 30psi pressure ; Group 4 in $43^{\circ}C$ water ; Group 5 in $43^{\circ}C$ water under 30psi pressure for 10 minutes, 1 hour 12 hours, 1 day and 3 days. The degree of polymerization was measured by means of Fourier Transform Infrared spectroscopy. The results were as follows: 1. The degree of polymerization increased constantly in accordance with curing time in all groups and after curing for 10 minutes, Group 1 showed significantly higher degree of polymerization after 12 hours and Group 2, Group 3, Group 4, Group 5 after 1 hour(p<0.05). 2. The degree of polymerization decreased in the order of Group 5, Group 4, Group 3, Group 2, Group 1 except when the curing time was 1 hour and 12 hours(p<0.05). 3. The degree of polymerization of Group 4, Group 5 cured at $43^{\circ}C$ showed significantly higher degree of polymerization than Group 2, Group 3 at $28^{\circ}C$ except when the curing time was 1 day(p<0.05). 4. Among Group 2, Group 3 and Group 4, Group 5, the pressure had no effect on polymerization except when the curing time was 12 hours(p<0.05). 5. Between Group 1 and Group 2, the method of storage had no effect on polymerization except when the curing time was 1 hour(p<0.05).

• Journal of the Korean Electrochemical Society
• /
• v.5 no.1
• /
• pp.30-38
• /
• 2002

Disordered carbon and boron-substituted disordered carbons $C_{l-x}B_x(x=0.05,\;0.10,\;0.20)$ were synthesized by Pyrolysis of LPG(liquid Propane gas)and $BCl_3$. Their electrochemical properties as anode materials for Li-ion secondary batteries were then investigated. When PVDF is added to the sample in a weight ratio 5 : 95, the disordered carbon with x=0.00 had the first discharge capacity 374 mAh/g. Its cycling performance was relatively good from the second cycle and it had the discharge capacity 258 mAh/g at the 10th cycle. When PVDF is added to the sample in a weight ratio 5 : 95, the sample with x=0.05 among the samples $C_{l-x}B_x(x=0.05,\;0.10,\;0.20)$ exhibited the largest first discharge capacity 860 mAh/g and discharge capacity 181 mAh/g at the 10th cycle. All the samples had similar cycling performances from the second cycle. The sample $C_{0.90}B_{0.10}$ showed the best electrochemical properties as a anode materials fur Li-ion secondary battery from the view points of the first discharge capacity(853 mAh/g when $10w1.\%$ PVDF is used), cycling performance, discharge capacity(400mAh/g at the 10th cycle when $10wt.\%$ PVDF is used). All the samples showed generally larger charge and discharge capacities when $10wt.\%$ PVDF ratter than $5wt.\%$ PVDF is used. The plateau region in the range of voltage lower than 1.25V becomes larger probably since the structure becomes less disordered by the addition of boron. When boron is added, the charge and discharge capacities decreased suddenly at the second cycle. This may be become only a part of Li are reversibly deintercalated and intercalated and a part of Li which are strongly combined with B are not deintercalated. The increases in charge and discharge capacities are considered to be resulted from the increase in the potential of Li in the boron-added carbons, caused by the strengthening of the chemical bond between the intercalated Li and the boron-carbon host since the boron acts as electron acceptor.

• Korean Journal of Weed Science
• /
• v.2 no.1
• /
• pp.41-46
• /
• 1982

Herbicidal effectivity on perennial paddy weeds such as Sagittaria pygmaea Miq. and Eleocharis kuroguwai Ohwi was evaluated. Herbicides used were butachlor [2-chloro-2, 6-dietyl-N(butoxymethyl)-acetanilide], benthiocarb [S-(4-chlorobenzy)-N, N-diethyl-thiocarbamate], molinate (S-ethyhexahyaro-l-Hazpine-carbothiate], SW-751, Chlormethoxynil (2.4-dichlorophenyl-3-methoxy-4-nitrophenyl-ether), CNP (2.4.6-trichlorophenyl-4-nitrophenylether),oxadiazon [2-tertbutyl-4-(2.4-dichloro-S-isopropoxyphenyl)-5-OXO-1.3.4-Oxadiazoline], dinuron [1-dimethyl-benthyl)-3-pheratrylurea], bentazon [3-isopropyl-IH-2.1.3-benzothiadiazine-(4)3H-one-2.2-dioxide], ACN (3-chloro-2-amino-l.4-naphthoquinone), MCPB [4-(2-methyl-4chlorophenoxy), butyric acid], 2.4-D (sodium 2.4-dichlorophenoxy acetic acid), MCP) sodium 2-methyl-4-chlorophenoxy acetic acid), SST-5, TH 63. Graszin D (Bentazon/2.4-D) and Graszin M (Bentazon/MCP) Herbicidal effectivity was divided into three types. Type I was the complete control both leaf and tuber, and SW-751 was belonged to this type. Type II was the partial control that exhibit complete control within certain period after herbicide application. After a certain period, however, the lateral bud have the germinability and grow normally, there after. Chloromethoxynil, CNP, ACN, and Oxadiazon were belonged to this group. Type III was no control at all. For E. kuroguwai, application of CNP, Chloromethoxnil, Oxadiazon and SW-751 gave good control in the early stage shile 2.4-D, MCP, bentazon and glaszin-D controlled well the intermediate stage application. Based on this results, E. kuroguwai can be controlled by herbicide application either in the early stage or in the intermediate stage.

• Composites Research
• /
• v.12 no.4
• /
• pp.71-78
• /
• 1999

To determine the effect of chemical structure of linear amine curing agents on thermal and mechanical properties, standard epoxy resin DGEBA was cured with diaminodiphenyl methane (DDM), diaminodiphenyl sulphone (DDS) in a stoichiometrically equivalent ratio. From this work, the effect of aromatic amine curing agents. In contrast, the results show that the DGEBA/DDS cure system having the sulfone structure between the benzene rings had higher values in the conversion of epoxide, density, shrinkage (%), glass transition temperature, tensile modulus and strength, flexural modulus and strength than the DGEBA/DDM cure system having methylene structure between the benzene rings, whereas the DGEBA/DDM cure system presented higher values in the maximum exothermic temperature, thermal expansion coefficient, and thermal stability. These results are caused by the relative effects of sulfone group having strong electronegativity and methylene group having (+) repulsive property and stem from the effect of the conversion ratio of epoxide group. The result of fractography shows that the each grain size of the DDM/DGEBA system with feather-like structure is larger than that of the DDS/DGEBA system.

• The Journal of Engineering Geology
• /
• v.25 no.1
• /
• pp.93-102
• /
• 2015

The characteristics of frozen soils are one of most important factors for foundation design in cold region. The objective of this study is to evaluate the shear strength and stiffness of frozen soils according to the confining conditions during the freezing and shearing phase. A direct shear box is constructed for the frozen specimens and bender elements are mounted on the wall of the shear box to measure shear wave velocities. Specimens are prepared by mixing sand and silt with a silt fraction of 30% in weight and the degree of saturation of 10%, giving a relative density of 60% for all tests. The temperature of the specimens in the freezer is allowed to fall below -5℃, and then direct shear tests are performed. A series of vertical stresses are applied during the freezing and shearing phase. Shear stress, vertical displacement, and shear wave along the horizontal displacement are measured. Experimental results show that in all the tests, shear strength increases with increasing vertical stress applied during the freezing and shearing phases. The magnitude of the increase in shear strength with increasing vertical stress during shearing under fixed vertical stress in the frozen state is smaller than the magnitude of the increase in vertical stress during freezing and shearing. In addition, the change in shear wave velocities varies with the position of the bender elements. In the case of shear waves passing through the shear plane, the shear wave velocities decrease with increasing horizontal displacement. This study provides an evaluation of the properties of shear strength and stiffness of frozen soils under varied confining condition.

• Restorative Dentistry and Endodontics
• /
• v.32 no.5
• /
• pp.419-425
• /
• 2007

The aim of this study was to evaluate the radiopacity and cytotoxicity of three resin-based (AH 26, EZ fill and AD Seal), a zinc oxide-eugenol-based (ZOB Seal), and a calcium hydroxide-based (Sealapex) root canal sealers. Specimens, 10 mm in diameter and 1 mm in thickness, were radiographed simultaneously with an aluminum step wedge using occlusal films, according to ISO 6876/2001 standards. Radiographs were digitized, and the radiopacity of sealers was compared to the different thicknesses of the aluminum step wedge, using the Scion image software. Using the 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay, the cytotoxicity of each material was determined in immortalized human periodontal ligament (IPDL) cells. The results demonstrated that EZ fill was the most radiopaque sealer, while Sealapex was the least radiopaque (p < 0.05). AH 26, AD Seal and ZOB Seal presented intermediate radiopacity values. All the materials evaluated, except for Sealapex, presented the minimum radiopacity required by ISO standards. The cell viabilities of resin-based root canal sealers were statistically higher than that of other type of root canal sealers through the all experimental time. Further, EZ fill showed statistically lower cell viability in 24 and 48 hours compared to AD Seal and in 72 hours compared to all other resin-based root canal sealers. However, there was no correlation between the radiopacity and cytotoxicity of three resin-based root canals sealers (p > 0.05). These results indicate that resin-based root canal sealer is more biocompatible and has advantage in terms of radiopacity.