• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.07b
• /
• pp.701-704
• /
• 2004

압전 외팔보의 구조가 갈수록 복잡해짐에 따라 더 정확하고 효과적인 압전체의 해석이 요구되어지고 있다. 본 논문에서는 3차원 직육면체요소를 이용한 유한요소법을 통해 압전 변환기를 해석하고, 이것을 실험적으로 검증함으로써, 3차원 유한요소법을 이용한 해석 프로그램의 타당성을 확인하였다. 또한 3차원 유한요소법을 이용해서 압전 외팔보를 해석하고, 이것을 실험 결과를 통해서 검증하였다. 그리고 압전 외팔보를 팬으로 적용하기 위해서 끝단에서의 최대 변위와 EMCF(Electo-Mechanical Coupling Factor)를 목적함수로 한 진화 전략 알고리즘을 적용하였다. 이를 통해서 팬용 압전 외팔보의 최적 설계를 수행하였다.

• Proceedings of the Korean Society for Rock Mechanics Conference
• /
• 2000.09a
• /
• pp.163-170
• /
• 2000

The distinct element method has been effectively applied to the analysis of stability and behavior of jointed rock masses. In this paper the modelling characteristics of different types of distinct element model were investigated. Arch tunnel examples were chosen to compare the calculation results of two computer codes, NURBM and CBLOCK, where the former is based on implicit algorithm, and the other on explicit one. CBLOCK calculations show that joint properties are very important parameters in the stability analysis and that the joint stiffness ratio associated with joint configuration could be used as an indicator, whereas NURBM differ from that. Some other disagreements were also identified.

• Tunnel and Underground Space
• /
• v.10 no.3
• /
• pp.410-417
• /
• 2000

The distinct element method has been effectively applied to the analysis of stability and behavior of jointed rock masses. In this paper the modelling characteristics of different types of distinct element model were investigated. Arch tunnel examples were chosen to compare the calculation results of two computer codes, NURBM and CBLOCK, where the former is based on implicit algorithm, and the other on explicit one. CBLOCK calculations show that joint properties are very important parameters in the stability analysis and that the joint stiffness ratio associated with joint configuration could be used as an indicator, whereas NURBM differ from that. Some other disagreements were also identified.

• Journal of Biomedical Engineering Research
• /
• v.15 no.4
• /
• pp.395-400
• /
• 1994

High resolution spectral analysis is essential for ECG anaysis. The fast Fourier transform has been widely used for frequency analysis of ECG signals but this procedure provides poor resolution when the data record is short and shows Gibb's phenomena. The ARMA FTF (Fast Transversal Filter) algorithm is used for high resolution spectral analysis. The reason of unsalability of this algorithm is investigated and the method for improving the numerical stability is proposed. The proposed algorithm is applied to spectral analysis of the ECG. Since this result has less variations than the FFT based results, it can be used for the computerized diagonosis of the ECG.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2019.05a
• /
• pp.63-63
• /
• 2019

최근 기후변화로 인한 도시지역 침수 피해를 저감하기 위한 다양한 연구가 수행되고 있으며 침수해석을 위한 기초자료로써 GIS 기반 하수관망 자료 활용의 중요성이 증대되고 있다. 그러나 이러한 하수관망 자료의 대부분은 지자체 수준의 행정단위에 의해 작성/관리 되고 있으며 하수관 망의 유지보수에 중점을 두어 제작되었기 때문에 침수해석을 위한 속성자료가 누락되어 있는 경우가 상당수 존재한다. 따라서 고유의 제작 목적과 침수해석이라는 활용 목적이 일치 하지 않아 속성 데이터 값이 존재하지 않거나 침수 모델링에 필요한 필수 정보가 누락되어 개별 연구자들이 별도의 보완작업을 수행한 후 침수해석에 활용하고 있는 실정이다. 이러한 개인연구자들의 주관적 판단에 의한 하수관망의 단순화 또는 보완작업은 상황에 따라 자료의 불확실성을 증대시키며 연구자의 숙련도와 배경지식에 따라 침수 해석 결과에 많은 영향을 미치고 있다. 따라서 GIS기반 하수관망 자료를 침수 모의에 활용 가능한 입력 자료로 변환 하는 경우 개별 연구자들의 주관적 개입이 최대한 배제된 형태의 자료를 만들기 위한 기본 알고리즘 개발이 시급한 상태이다. 본 연구에서는 서울시 사당역 인근 유역과 부산시 온천천 유역의 GIS 기반 하수관망 자료의 형식에 대해서 알아보고 누락 자료를 보완하기 위한 알고리즘을 개발하였다. 개발된 알고리즘을 활용하여 누락자료가 보완된 하수관망 자료는 향후 개별 연구자들의 주관적 판단을 배제하여 도시침수 해석 시 하수관망 자료의 불확실성을 최소화 하는데 기여할 수 있을 것으로 판단된다.

• Journal of IKEEE
• /
• v.20 no.1
• /
• pp.94-102
• /
• 2016

This paper proposes a new prediction method to reduce times and labor of repetitive multi-physics simulation. To achieve exact results from the whole simulation processes, complex modeling and huge amounts of time are required. Current multi-physics analysis focuses on the simulation method itself and the simulation environment to reduce times and labor. However this paper proposes an alternative way to reduce simulation times and labor by exploiting machine learning algorithm trained with data set from simulation results. Through comparing each machine learning algorithm, Gaussian Process Regression showed the best performance with under 100 training data and how similar results can be achieved through machine-learning without a complex simulation process. Given trained machine learning algorithm, it's possible to predict the result after changing some features of the simulation model just in a few second. This new method will be helpful to effectively reduce simulation times and labor because it can predict the results before more simulation.

• Journal of Cadastre & Land InformatiX
• /
• v.50 no.2
• /
• pp.155-168
• /
• 2020

Open source is a key growth engine of the 4th industrial revolution, and the continuous development and use of various algorithms for image processing is expected. The purpose of this study is to examine the effectiveness of the UAS image processing open source based algorithm by comparing and analyzing the water reproduction and moving object filtering function and the time required for data processing in 3D reproduction. Five matching algorithms were compared based on recall and processing speed through the 'ANN-Benchmarks' program, and HNSW (Hierarchical Navigable Small World) matching algorithm was judged to be the best. Based on this, 108 algorithms for image processing were constructed by combining each methods of triangulation, point cloud data densification, and surface generation. In addition, the 3D reproduction and data processing time of 108 algorithms for image processing were studied for UAS (Unmanned Aerial System) images of a park adjacent to the sea, and compared and analyzed with the commercial image processing software 'Pix4D Mapper'. As a result of the study, the algorithms that are good in terms of reproducing water and filtering functions of moving objects during 3D reproduction were specified, respectively, and the algorithm with the lowest required time was selected, and the effectiveness of the algorithm was verified by comparing it with the result of 'Pix4D Mapper'.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.46 no.6
• /
• pp.163-174
• /
• 2009

Applying the maximally polyphase decomposition and noble identity to the adaptive filter in subband structure, the conventional fullband affine projection algorithm is translated to the subband affine projection (SAP) algorithm. The Maximally polyphase decomposed SAP (MPDSAP) algorithm is a special version of the SAP algorithm, and its adaptive sub-filters have unity projection dimension. The weight updating formular of the MPDSAP is similar to that of the NLMS algorithm, so it may be more proper algorithm than other AP-type algorithms for many practical applications. This paper presents a new statistical analysis of the MPDSAP algorithm. The analytical model is derived for autoregressive (AR) inputs and the nonunity adaptive gain in the subband structure with the orthonormal analysis filters (OAF), The pre-whitening by the OAF allows the derivation of a simple-analytical model for the MPDSAP with the AR inputs and the nonunity adaptive gain.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.18 no.2
• /
• pp.183-193
• /
• 2016

Estimation of the stability of an operating tunnel through a back analysis is a difficult concept to analyze. Specially, when a relatively thick lining is constructed as in case of a subsea tunnel, there will be a limit to the use of displacement-based tunnel back analysis because the corresponding displacement is too small. In this study, DEA is adopted for tunnel back analysis and the feasibility of DEA for back analysis is evaluated. It is implemented in the finite difference code FLAC3D using its built-in FISH language. In addition, the stability of a tunnel lining will be evaluated from the development of displacement-based algorithm and its expanded algorithm with conformity of several parameters such as stress measurements.

• Computational Structural Engineering
• /
• v.7 no.3
• /
• pp.177-183
• /
• 1994

The purpose of this study is to develop the analytical method and to analyze the geometrically nonlinear behavior of suspension bridges. Two step algorithm is developed to analyze the initial profile under the deal load and the nonlinearity under the live load. Since the geometrically nonlinear effect is great comparing with the linear analysis, it should be considered in the analysis and design. The comparison between analysis and measurement shows that the new algorithm is effective.