• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2011.07a
• /
• pp.327-328
• /
• 2011

3D 영상산업이 발전해 오면서 현재 3D 영상으로 가장 많이 사용되는 것이 stereoscopic 이다. 이러한 stereoscopic 영상을 표현해 주는 기기로써, 셔터식 혹은 편광식 3D 디스플레이가 사용되고 있으며 두가지 방식 모두 제품화가 이루어져 경쟁을 하고 있는 상황이다. 그러나 이러한 3D 디스플레이에 관련하여 crosstalk 문제는 해결해야 하는 가장 큰 문제로 남아 있다. 본 논문에서는 편광식 3D 디스플레이의 다양한 파라메터에서 나타날 수 있는 crosstalk를 시뮬레이션하여 보여주는 시뮬레이터를 제안한다. 다양한 옵션하에서 나타날 수 있는 crosstalk를 시뮬레이션하여 보여줌으로써, 3D 디스플레이의 제작에 있어 crosstalk를 최소화하기 위한 최적의 파라메터를 찾을 수 있다.

• Journal of Korean Ophthalmic Optics Society
• /
• v.2 no.1
• /
• pp.97-101
• /
• 1997

We studied the Malus's law for two and three polarizers experimentally. It was satisfied for two polarizers such as ${\phi}=cos^2{\theta}$, for three polarizers such as ${\Phi}=\frac{1}{4}sin^22{\theta}$.

• Korean Journal of Optics and Photonics
• /
• v.32 no.1
• /
• pp.29-33
• /
• 2021

We have experimentally simulated the violation of the Leggett-Garg inequality (LGI) using a heralded-single-photon source via spontaneous parametric down-conversion (SPDC) in a periodically poled potassium titanyl phosphate (PPKTP) crystal. We measured the polarization fringe as a function of the angle of the linear polarization of the photons, and analyzed the LGI according to n measurement. Simulation results for LGI based on the polarization of the heralded single photon were in good agreement with theoretical calculations.

• Korean Journal of Optics and Photonics
• /
• v.2 no.1
• /
• pp.26-30
• /
• 1991

TO study the polarization optical bistability (POB), we constructed the hybrid opto-electronic interferometer which has orthogonal polarized lights and one of the optical phases is modulated by a feedback signal. And we developed the theoretical POB equation for this system and observed the POB by varying input intensity of the light and initial phase experimentally.

• Korean Journal of Optics and Photonics
• /
• v.14 no.3
• /
• pp.224-229
• /
• 2003

We realized a depolarizer based on two 2$\times$2 directional couplers and single mode optical fiber. A reduction method for the degree of polarization is demonstrated by using computer simulation, which is verified experimentally. The degree of polarization is -20 dB for the polarized input beam of spectral width less than 0.05 nm. The experimental results verify that the polarization noise, which is due to the change of the input polarization state, can be reduced by making the fiber-ring delay-line length greater thanthecoherencelengthofthesource.

• Korean Journal of Optics and Photonics
• /
• v.8 no.6
• /
• pp.486-491
• /
• 1997

A division-of-amplitude type photopolarimeter has been constructed for the analysis of the dynamic optical characteristics of liquid crystal panels, one of the essential components of liquid crystal displays. In this instrument an incoming light ray, whose state of polarization is to be determined, is divided into three rays of nearly same intensities and of identical polarization state by using NPBS'(non-polarizing beam splitters). Each of the three rays is further divided into two components of orthogonal polarization states by using a PBS(polarizing cube beamsplitter) or by using a combination of a quater wave plate followed by a PBS. The intensity of each ray is measured by using a photodiode to produce a set of six photo-signals, which in turn are converted into four Stokes parameters describing the state of polarization of the incoming ray. Performance test of the insrument shows that its time resolution is 80 $mutextrm{s}$, accuracy $\pm$0.3 degrees when the state of polarization of the incoming ray is representated on the Poincare sphere.

• Korean Journal of Optics and Photonics
• /
• v.19 no.2
• /
• pp.150-158
• /
• 2008

The exact transmission coefficients at the interface between a uniaxial anisotropic medium and an isotropic medium at? oblique incidence are derived by applying the extended Jones matrix method. When the birefringence of the uniaxial anisotropic medium is small ($|n_e-n_o|\;{\ll}\;n_o,\;n_e$), the exact transmission coefficients are compared with those by the conventional extended Jones matrix method by Yeh et al. They showed an excellent agreement with each other. In addition, using the exact transmission coefficients, we calculated the polarization characteristics of a light through a uniaxial medium to an incident light with arbitrary polarization state at? oblique incidence. We compared the transmittances of an unpolarized light through a pair of crossed o-type polarizers by two different methods and calculated the transmittance as the variation of the optical constants of the polarizers to evaluate of the extinction ratio. The polarization analysis method using the exact transmission coefficients can be applied to polarization characteristics of a light through a uniaxial medium with large birefringence as well as to liquid crystals and to optical anisotropic material.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.40 no.10
• /
• pp.39-44
• /
• 2003

The characteristics of the optical fiber polarizer have been analyzed theoretically by using the Fresnel equations and compared with the results computed by the Yeh's electromagnetic theory. we found that they agreed reasonably well each other for the optical fiber polarizer of our interest.

• Korean Journal of Optics and Photonics
• /
• v.15 no.4
• /
• pp.331-336
• /
• 2004

The phase change due to the reflection from target surfaces in a white-light interferometer induces measurement errors when target surfaces are composed of dissimilar materials. We prove that this phase change on reflection as the polarization of the white-light changes causes a shift of both envelope peak position and fringe peak position of several tens of nanometers as the polarization of the white-light changes. In addition, we propose a new equation for white-light interference fringes depending on the polarization of the source.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.25 no.7
• /
• pp.1039-1046
• /
• 2001

Among the automotive steering systems, an Electric Power Assisted steering (EPAS) system utilizes an electronically controlled electric motor to provide steering assistance to the driver. The key components of the EPAS system are torque sensor, ECU (Electronic Control Unit), and DC Motor. The most important component of the EPAS is the torque sensor. The conventional torque sensor has complicated mechanical mechanism of torque detection. However, we suggest a non-contact torque sensor for EPAS using Maluss polarization law. It was found that the sensor exhibited not only excellent linearity but also superior characteristics of hysteresis, temperature and vibration.