• Journal of Satellite, Information and Communications
• /
• v.7 no.2
• /
• pp.67-71
• /
• 2012

This paper represents the impact analysis results of antenna reflector for the UHF-band antenna of Space Launch Vehicle. Three types of UHF-band antenna reflector model have been proposed and simulated to compare their characteristics such as resonance frequency, reflection loss and radiation pattern etc. Simulation results showed that resonance frequency and return loss of each reflector models were rarely affected even if reflector sizes are changed. The antenna gain and 3dB bandwidth were slightly changed to the worse directions as the reflector sizes are smaller.

• Explosives and Blasting
• /
• v.35 no.4
• /
• pp.10-18
• /
• 2017

In this study, Rock deformation at the artificially advanced face was investigated by using the finite element code relating to the split blasting conducted in urban area. The maximum principal strain according to the detonation pattern and the detonation delay time at the rock surface was compared with the modeled blast section. As a result, it was found that the maximum principal strain was observed a difference depending on the detonation pattern at the rock surface, and the detonation delay time was an important parameter in split blasting.

• Journal of Korea Game Society
• /
• v.20 no.6
• /
• pp.43-52
• /
• 2020

This paper presents a fast pattern tracking method using location prediction in cubemap video for 360-degree VR. A spherical cubemap frame has six face textures and searching a pattern is much slower than a flat image. To overcome the limitation, we propose a method of predicting the location of target pattern using Kalman filter and reducing the search area by considering only textures of predicted location. The experimental results showed that the proposed system is much faster than the previous method of searching all six faces and also gives accurate pattern tracking performance.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.5 no.2
• /
• pp.44-57
• /
• 1995

In this paper GFI (Generalized Fuzzy Isodata) and FI (Fuzzy Isodata) algorithms are studied and applied to the tire tread pattern classification problem. GFI algorithm which repeatedly grouping the partitioned cluster depending on the fuzzy partition matrix is general form of GI algorithm. In the constructing the binary tree using GFI algorithm cluster validity, namely, whether partitioned cluster is feasible or not is checked and construction of the binary tree is obtained by FDH clustering algorithm. These algorithms show the good performance in selecting the prototypes of each patterns and classifying patterns. Directions of edge in the preprocessed image of tire tread pattern are selected as features of pattern. These features are thought to have useful information which well represents the characteristics of patterns.

• Korean Journal of Optics and Photonics
• /
• v.13 no.2
• /
• pp.155-161
• /
• 2002

The nail bed is located under the finger nail. The arched portions of the nail bed, which contain a large number of capillary loops, are separated by the valley of the nail bed. The valley of the nail bed does not contain capillary loops. Light is scattered when it propagates through the dermis of skin, and human blood strongly absorbs the light with proper wavelength. By use of the optical properties of the nail bed, we propose an optical technique which extracts the nail bed image of the finger nail. After achieving nail bed images of each individual, we correlated between them. The correlation outputs show that we can identify individuals by comparing the peak heights of the correlation outputs.

• The Journal of the Acoustical Society of Korea
• /
• v.23 no.3
• /
• pp.197-205
• /
• 2004

This paper represents the results of interpretation on the cause of sign changing of the striation slopes appearing in the range-frequency domain spectrogram of ship-radiated noise measured in a shallow sea. Striation patterns and dispersion characteristics simulated from a numerical model based on mode theory at various seabed conditions show that the sign changing of the striation slopes appearing in measured signal is caused by the shear property of seabed. more specifically by the shear property of the basement lying below the sediment which is estimated about 3±1m thick.

• Atmosphere
• /
• v.28 no.3
• /
• pp.305-315
• /
• 2018

This study investigates the characteristic spatial patterns and dynamic processes associated with the summertime extreme temperature events in South Korea during the last 20 years (1995~2014) using Self-Organizing Map (SOM). The classified SOM patterns commonly have high temperature and anticyclonic circulation anomalies over South Korea. The two major teleconnection patterns are identified: one is from the subtropical western North Pacific (WNP) affecting to the north and the other is from the North Atlantic (NA) affecting downstream region. The meridional teleconnection pattern is related to the forcing of positive sea surface temperature (SST) anomaly over the WNP. The northward propagating Rossby wave generates the East Asia-Pacific (EAP) pattern to form an anticyclonic circulation anomaly over South Korea. On the other hand, NA SST anomalies generate an eastward Rossby wave train across the Eurasian continent, leading to the development of an anticyclonic circulation anomaly over South Korea. The EAP pattern occurs more frequently in July and August, whereas the midlatitude teleconnection pattern associated with NA SST anomalies develops more frequently in early summer (June).

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.35D no.9
• /
• pp.20-25
• /
• 1998

Cu removal rates for various SiO$_2$ trench pitch sizes and densities and AFM images of surface profiles after global planarization using Cu CMP technology are investigated. In the experimental results, Cu removal rates are increasing as the pattern densities and pattern pitches are getting high and low, respectively, and then decreasing after local planarization. The rms roughness after global planarization are about 120$\AA$. AFM images with a 50% pattern density for 1${\mu}{\textrm}{m}$ and 2${\mu}{\textrm}{m}$ pitches show that thicknesses of 120~330$\AA$ Cu interconnects have been peeled off and oxide erosion of Cu/Sio$_2$ sidewall is observed. However, AFM images with a 50% pattern density for 10${\mu}{\textrm}{m}$ and 15${\mu}{\textrm}{m}$ pitches show that 260~340$\AA$ thick Cu interconnects have been trenched at the boundaries of Cu/Sio$_2$ sidewall.

• Food Industry
• /
• s.15
• /
• pp.47-50
• /
• 1973

정부의 식생활개선정책에 발맞추어 우리들의 식생활구조는 점차 쌀위주의 고정관념에서 잡곡의 혼식, 분식의 패턴으로 현저한 변화를 가져여오고 유다. 그러나 식량소비패턴은 량과 질의 두가지 면에서 결정되어야 할 것이며, 현재의 식생활구조는 량과 질의 불균형한 소비 패턴을 보여주고 있다.

• The Journal of the Acoustical Society of Korea
• /
• v.22 no.7
• /
• pp.554-561
• /
• 2003

Results of the numerical simulation and experimental data analysis for identification of mode cutoff frequency and estimation of sound speed of seabed from the spectrum of acoustic signal received at fixed source-receiver range are presented. Model simulations for Pekeris waveguide show that the frequency-dependent propagation loss and interference pattern are closely related to mode cutoff frequencies and it could be possible to the identify them from the changes of interference pattern. The concept considered at numerical simulations is applied to signals acquired at sea test. Cutoff frequency and sound speed of seabed are estimated from the interference pattern of measured signal. Propagation loss predicted using the estimated sound speed of seabed as model input parameter shows similar estimation result compared to propagation loss derived from measured data.