• Korean journal of applied entomology
• /
• 제46권2호
• /
• pp.251-259
• /
• 2007

For the development of integrated pest management system by harmonizing biological and chemical control, some experiments wee carried out to select low toxic pesticides against natural enemies. and their residual toxicity were evaluated. Leaf dipping method, body dipping method, and diet treatment method were set up for the toxicity evaluation against Cotesia glomerata adults. We had tested 46 different pesticides (31 insecticides, 11 fungicides, 4 herbicides) at recommending concentration commonly used to control diamond back moth, disease and up-land weeds in chinese cabbage field. Twenty three insecticides, eleven fungicides, and four herbicides were shown to be low toxic to C. glomerata adults in the treatment of body dipping. After insecticide spraying at recommending dose on the chinese cabbage, we examined residual effect of insecticides by introducing natural enemies on different days. Safety interval for the introduction of C. glomerata adults was established according to the residual toxicity of pesticides. Safe insecticides for the introduction of C. glomerata adults at one day after treatment (DAT) were thiacloprid, acephate, chlorfenapyr, clothianidin and at 3 DAT were imidacloprid, deltamethrin, thiamethoxam, dimethylvinphos, emamectin benzoate.

• Journal of the Korea Institute of Building Construction
• /
• 제11권2호
• /
• pp.162-170
• /
• 2011

As the result of implementing a treated material test and durability test after quickly drying S.P.F. species, a type of softwood structural material, within a short period time, soaking it in liquid phosphate flame proof agent for an hour, microwave heating it, and compressing it from 3.8cm to 1cm, when setting the appropriate heating time of microwave heating at 7 minutes at 5kW, it is observed that it satisfies the target water content (4~5%). It is shown that in a water content measurement of the wood that is compressed after being softened by soaking in the flame proof agent, drying and heating at 3kW for 9 minutes, all specimens satisfied 12~14%, the appropriate water content for exterior wood. Also, it is shown that in terms of the flame performance obtained through a flame resistance treatment of the compressed wood and a treated material test, the specimen soaked in flame proof agent for 30 minutes was the most excellent, and that the performance test result of the compressed wood in all areas, such as nail withdrawal resistance, compression, bending strength, and shearing strength, were all improved in their mechanical features to twice to three times better performances.

• Journal of Convergence for Information Technology
• /
• 제7권6호
• /
• pp.61-67
• /
• 2017

To evaluate optimum conditions of extract active components, extraction of Abeliophyllum distichum Nakai was performed with various ethanol and water mixture at ethanol concentration of 0, 20, 40, 60, 80 and 100%(v/v) and extraction methods. Higher polyphenol and flavonoids contents of extract achieved at 2 hours of reflux extraction in 80% ethanol. The highest DPPH free radical scavenging activity of the stem extracts by soaking method and butanol fractions of leaf extracts are 71.3% and 103.3% respectively. The results suggested that Abeliophyllum distichum Nakai can be used for valuable natural resource.

• Food Science and Preservation
• /
• 제10권3호
• /
• pp.320-325
• /
• 2003

This study was conducted to optimize sugaring process of yam for development of new snack product and enhancement acceptability. Three variables by five level central composite design and response surface methodology were used to determine optimum conditions for sugaring time, temperature and concentration. Optimization of the process was conducted using the combination of the moisture content, solid content, color and rehydration ratio. The regression polynomial model was suitable (P>0.05) model by Lack-of-Fit analysis with highly significant. To optimize the process, based on surface response and contour plots, superimposing the individual contour plots for the response variables. The optimum conditions for this process were 5.5 hours and 58％ at 40$^{\circ}C$ under the optimum of restricted variables as moisture content was 66 to 70, solid content was 25 to 30％, L value was above 75, a value was -2.1 to -2.4, b value was above 5 and rehydration ratio was 200 to 250.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• 제14권9호
• /
• pp.4117-4123
• /
• 2013

In the present study, coating corrosion characteristics of the heat exchanger for sea water are experimentally investigated. Coating types by a teflon, an electrodeposition and a ceramic+silicon were tested and compared with the corrosion characteristics of an aluminum. For the acceleration of corrosion by sea water, the temperature of sea water $70^{\circ}C$ and the concentration of salt 3.5% were considered. And the specimens were immersed in sea water during 9 weeks. Coating corrosion characteristics were measured by using the impedance method and SEM. Experimental results showed that polarization resistances obtained from Bode plot were related to the corrosion resistance of coating types, and the corrosion resistance of double coating were maintained during 4 weeks. From SEM photograph, we saw that blisters was generated on the interface between metal and coating.

• Journal of the Korea institute for structural maintenance and inspection
• /
• 제27권5호
• /
• pp.16-22
• /
• 2023

In this study, a salt water immersion test was performed on concrete specimens simulating the concrete mix design of the nuclear power plant, and the correlation between the amount of chloride and the XRF component according to the depth of the concrete was analyzed. The amount of chloride on the surface of the nuclear power plant concrete increased slightly with increasing immersion time in salt water, but the amount of chloride in the depth of 5.5 mm or more showed a clear tendency to increase with increasing immersion time in salt water. As a result of analyzing the correlation between the amount of chloride in concrete and the XRF component, the concrete with 20% FA substitution compared with the OPC concrete showed a very high correlation between the composition ratio of Cl ions and the evaluation result of salt damage resistance by XRF component analysis. Accordingly, it was confirmed that chlorine ion analysis and salt damage resistance performance evaluation by XRF component analysis were possible through repeated data accumulation in the nuclear power plant concrete mix with 20% fly ash replacement.

• Journal of the Korea Institute of Building Construction
• /
• 제24권3호
• /
• pp.297-308
• /
• 2024

This study presents a novel approach for evaluating fire-induced damage depth in concrete. The methodology leverages the principle that exposure to high temperatures causes internal expansion within concrete, leading to increased voids and microcracks in the damaged zones. This heightened porosity results in greater absorption rates compared to undamaged areas. By immersing fire-damaged concrete samples in water and subsequently monitoring the drying process, the depth of damage can be assessed. Differences in drying rates and color variations between damaged and undamaged areas serve as visual indicators for determining the extent of the damage. Experimental results from this water immersion method revealed damage depths of 38.7mm and 37.5mm for two different concrete mixtures. These measurements notably surpass the damage depths estimated using traditional phenolphthalein-based methods. This discrepancy suggests that utilizing the absorption rate principle, which is directly linked to the physical changes caused by thermal expansion, offers a more accurate and sensitive assessment of fire damage depth compared to methods relying solely on the presence of Portlandite for colorimetric indication.

• 한국전기화학회:학술대회논문집
• /
• 한국전기화학회 2001년도 연료전지심포지움 2001논문집
• /
• pp.237-242
• /
• 2001

용융탄산염 연료전지에서 분리판으로 사용되는 316L 스테인리스 스틸의 내식성을 향상시키기 위해 Ni과 Al을 전기도금법에 의해 코팅하였으며 열처리를 통해 스테인리스 스틸표면에 $Ni_2Al_3$, NiAl 등의 금속간화합물을 형성시켰다. $62mol\%Li_2CO_3-38mol\%K_2CO_3$ 전해질 내에서 100시간 동안 침지실험을 수행한 결과 Al의 도금두께가 $10{\mu}m$ 이상인 경우에는 내식성이 상당히 향상되었음을 확인하였다.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 한국표면공학회 2015년도 추계학술대회 논문집
• /
• pp.334-335
• /
• 2015

알루미늄 양극산화 피막의 내마모성 향상 및 염료 침지의 봉인을 위해 다양한 봉공처리법이 개발되고 상용되어왔다. 현재, 주로 사용되는 방법들은 에너지 소비량이 많고, 유독성의 용액을 사용해야하며 봉공처리의 품질 자체가 좋지 못하다는 단점이 있다. 이에 저에너지 소비 및 친환경적이고 무독성의 용액을 사용하는 봉공처리를 고안하고자 한다.

• Proceedings of the Korean Society of Fisheries Technology Conference
• /
• 한국어업기술학회 2001년도 춘계 수산관련학회 공동학술대회발표요지집
• /
• pp.150-151
• /
• 2001

생선회 맛은 법을 때에 이빨로 느끼는 촉감, 즉 육질의 단단함에 의하여 결정되며, 육질이 단단한 어종일수록 고급 횟감으로 취급한다. 육질의 단단함에는 어종에 따라서 결정되는 고유의 단단함(background toughness)과 근육의 수축에 의한 단단함(actomyosin toughness)으로 나누어진다. 생선회 고유의 단단함은 근육 중의 collagen의 함량 및 분포형태에 따라서 결정되고, 근육의 수축에 의한 단단함은 근육이 수축되면 myosin과 actin의 결합에 의한 actomyosin복합체 형성으로 근육에 장력이 발생하여, 근육의 수축에 의한 육질의 단단함이 상승한다. (중략)