• Journal of Bio-Environment Control
• /
• v.13 no.1
• /
• pp.61-66
• /
• 2004

To investigate the effect of charcoal on the physico-chemical characteristics in the growing media and the growth of oriental melon, six treatment, 0%, 10%, 20%, 30%, 40%, and 50% charcoal, were added into the growing media, Baroker. The value of pH in the charcoal contained growing media (CGM) was recorded higher and further increased by raising the charcoal ratio and by growing period. In 20% CGM, the range of pH was adequate to grow crop as 5.2${\sim}$5.8. Contents of Ca and K in CGM increased by raising the ratio of charcoal, while contents of Mg and Na decreased. The growth of oriental melon seedlings in 20% and 30% CGM was better than in other treatments, in terms of fresh and dry weight of shoot, plant height, leaf area, lear width and relative growth rate. Both the physico-chemical properties of growing media and the growth of oriental melon seedlings were changed by the addition of charcoal. These results suggest that charcoal can be used as mixing material with other potting media for producing the seedling of good quality.

• Journal of Bio-Environment Control
• /
• v.13 no.1
• /
• pp.21-25
• /
• 2004

This experiment was carried out to investigate the effect of apex removal at different leaf ages on the growth and yield of broccoli in pinching cultivation. Apex was pinched when 2, 3 or 4 true leaves were spread during nursery bed, and non-pinching was conventional method. The plant height was not different among treatments but the fresh weight was decreased as the pinching days were delayed. The numbers of leaves and lateral shoots were increased compared to those of non-pinching by pinching. Days to central budding were shortended by 3 days when pinched at 2 true leaves spreading stage than those of non-pinching. Central (1st) head weight was heaviest when pinched at the time of 2 true leaves spreading (157g). Total head weight was heaviest when pinched at the time of 2 true leaves spreading (378g), and lowest at 4 true leaves spreading stage (196g). Marketable yields were increased by 48% when pinched at the time of 2 true leaves spreading (1,754kg) as compared with those of non-pinching (1,184kg) and lowest when pinched at the time of 4 true leaves spreading (820kg). Also, first harvest was shortended by 6 days by pinching at 2 true leaves spreading stage.

• Journal of Bio-Environment Control
• /
• v.30 no.4
• /
• pp.304-311
• /
• 2021

This Experiment was conducted to determine the effects of light shield materials when melon grown inside a plastic greenhouse in summer season. The average temperatures were 36.6℃, 34.5℃ and 34.0℃ respectively for the control(non-shield), coating agent, and the white net. The light transmittances were 69% and 75%, respectively inside the greenhouse treated with the coating agent and white net immediately after applicants, compared with that inside the control greenhouse. At the 40 and 80 days after treatment, the light transmittances for the coating agent were 92% and 98%, respectively, indicating it was slowly decomposed and removed, but there was no change in the transmittance for the white net. While the leaf number did not differ among the treatments, the plant height was higher in the white net and shading agent than in control. The weight of the leaves, fresh-weight and dry-weight were no different from that of shading, but it became heavier in the later stages. The marketable fruit yield was increased by 6% for white nets and 5% for the coating agent compared to control, there was no statistical significance. Therefore, coating agent is considered as an effective method to lower temperature during high temperature period, but it is preferable to use it in consideration of cultivation period, because the coating agent is gradually removed.

• Korean Journal of Plant Resources
• /
• v.34 no.4
• /
• pp.270-277
• /
• 2021

Veronica rotunda var. subintegra (Nakai) T. Yamaz. is perennial herb belonging to the family Scrophulariaceae, native to Korea. Plant growth regulators, cutting mediums, cutting position, and leaf size were examined to investigate the requirements for cutting propagation of V. rotunda var. subintegra. This study was conducted over a period of 6 weeks from March to May 2017 in the Division of Plant Resources, Korea National Arboretum. For all treatments, survival and rooting percentage was 100%. In PGRs experiment, the number of roots and shoot length treated with 100 mg/L IBA treatment was significantly higher than that of NAA treatment. The shooting percentage was decreased with an increase of the PGRs concentration. In growing substrates experiment, the number of roots on commercial soil (61.2) was the highest, followed commercial + kanuma soil (45.7), and the lowest was kanuma soil (41.8). The shoot length treated with commercial soil (8.9 cm) was significantly greater than that of kanuma soil (4.1 cm). In cutting positions experiment, the number of roots treated with apical (56.6) was significantly higher than that of basal (38.8). In leaf-cut experiment, the number of roots and of shoot length treated with full leaf was significantly higher than that of half leaf. As a result, we recommend treating cuttings with 100 mg/L IBA treatment, commercial soil, apical position, and full leaf for successful cutting propagation of V. rotunda var. subintegra.

• Journal of Bio-Environment Control
• /
• v.30 no.3
• /
• pp.212-217
• /
• 2021

This experiment was conducted to compare effects of summer pruning at different times and dormant pruning on shoot growth and yield of northern highbush blueberry. Using 7 (2018) to 9 (2020) years old 'Duke' bushes grown in 180 L containers, summer pruning was treated on June 20 (around 30 days after harvest), July 20, and August 20 consecutively in both 2018 and 2019 removing 30% of the total woods, while dormant pruning (conventional) was on January 20 in both 2019 and 2020. Summer pruning reduced shoot growth the following year, especially when treated in late summer. Total shoot length per bush decreased to 47%, 37%, and 33% on October 15, 2020 in June, July, and August pruning, respectively, compared with that of dormant pruning. Summer pruning at different times in 2018 and 2019 did not affect berry characteristic in the following year. Yield per bush was not significantly changed in 2019, but it decreased by 21 to 38% in 2020 in the summer pruning treatments compared with 2.9 kg of the dormant pruning. It was concluded that consecutive summer pruning in 'Duke' under unheated plastic house could weaken the shoot growth with reducing yield.

• Journal of Bio-Environment Control
• /
• v.30 no.3
• /
• pp.175-182
• /
• 2021

This experiment was conducted to find out the possibility of use of reused rockwool and comparison of growth, productivity and quality of tomatoes according to the use of rockwool and coir medium. The experiment was conducted in an automatic controlled greenhouse at Andong National University, College of Life Science, located in Andong, Gyeongsangbuk-do.. As a result of the experiment, there was no difference in the number of leaves, plant height, and leaf area between treatments, and the crown diameter was slightly higher in rockwool medium, also there was no difference between reused rockwool and coir medium. Fruit productivity showed different responses depending on the cultivation environment, but there was no significant difference between rockwool, reused rockwool and coir medium. In addition, the quality of fruit was observed to be different according to the concentration of EC in the medium. Therefore, in tomato hydroponic cultivation, there was no difference in the type of medium in growth, productivity, fruit quality and the environmental and water management had a great effect, and it is expected that the reuse of rockwool will have a positive effect on the economic point of view.

• Journal of Bio-Environment Control
• /
• v.28 no.2
• /
• pp.158-165
• /
• 2019

The effects of microbubbles on glucosinolate accumulation and growth of watercress (Nasturtium officinale R. Br.) were investigated. Watercress plant at the 4th mature leaf stage (2 weeks old) were exposed to microbubbles or non-microbubbles generated in an Otsuka-house nutrient solution for 3 weeks in a controlled environment culture room. Stem length of the watercress grown under the microbubbles was 41% shorter than that of the non-microbubbles, showing significantly different. However, shoot fresh and dry weights, root length, leaf length, leaf width, SPAD, and quentum yield of the watercress were not significantly different between treatments. Glucoiberin, glucobrassicin, gluconapin, gluconasturtiin of the watercress grown under microbubbles, excepted for 4-methoxyglucobrassicin, were significantly higher than those of the watercress grown in non-microbubbles. In addition, watercress grown under microbubbles for 3 weeks contained 85% (${\mu}mol/g$ DW) and 65% (${\mu}mol/plant$) more total glucosinolate, respectively. Results indicated that microbubbles generated in a deep flow technique hydroponics system could increase the accumulation of glucosinolate without growth reduction.

• Journal of Bio-Environment Control
• /
• v.28 no.2
• /
• pp.104-109
• /
• 2019

The crops recommended for the plant factory system are diverse. The importance of planting density in the plant factory is being recognized. The objective of this study was to determine the optimal planting density for growth and quality of kohlrabi in a closed-type plant factory system. The kohlrabi was grown under fluorescent lamps and nutrient film technique system. The growth and quality of kohlrabi were investigated under four different planting densities ($22plants/m^2(15{\times}30cm)$, $27plants/m^2(15{\times}25cm)$, and $33plants/m^2(15{\times}20cm)$). There were no significant interactions between Shoot fresh and dry weights per plant or bulb stem fresh and dry weights per plant and planting density. Shoot fresh and dry weight per area or bulb stem fresh and dry weight per area were the highest at $33plants/m^2$. There were no significant interactions between plant height, leaf area, photosynthetic rate, hardness, and chlorophyll content and planting density. Significant differences in Bulb stem height and diameter, and brix were observed. Bulb stem height and diameter and brix of kohlrabi were the highest at $22plants/m^2$. Based on our results, we conclude that the optimal planting density is $33plants/m^2$ for growth of kohlrabi, however, the optimal planting density is $22plants/m^2$ for quality of kohlrabi in a closed-type plant factory system.

• Journal of Bio-Environment Control
• /
• v.30 no.1
• /
• pp.72-76
• /
• 2021

The amount of evapotranspiration (water absorption) according to wind speed showed the same trend in gold mound (Spiraea × bumalda), Japanese spurge (Pachysandra terminalis), and ivy (Hedera japonica Tobler). All the three plants showed maximum water absorption at 4 m·s-1; water absorption tended to decrease as wind speed decreased. The control group without wind speed treatment had the most amount of water absorption compared with the groups that were subjected to wind exposure. However, the plant growth of all three plants increased to the maximum value when wind speeds were 2 and 1 m·s-1. When comparing the relationship among water absorption, air temperature, and relative humidity, the water absorption of plants tended to be low from May 20 to 26, when air temperature and relative humidity were the lowest. The results of this study will help establish an urban wall-planting system taking building wind into consideration. Further, this study may help in the selection of plant types for ecological parks in windy islands.

• Journal of Bio-Environment Control
• /
• v.31 no.1
• /
• pp.1-7
• /
• 2022

Strawberry is a stand-out cultivating fruit in Korea. The optimum production of strawberry is highly dependent on growing environment. Smart farm technology, and automatic monitoring and control system maintain a favorable environment for strawberry growth in greenhouses, as well as play an important role to improve production. Moreover, physiological parameters of strawberry plant and it is surrounding environment may allow to give an idea on production of strawberry. Therefore, this study intends to build a machine learning model to predict strawberry's yield, cultivated in greenhouse. The environmental parameter like as temperature, humidity and CO₂ and physiological parameters such as length of leaves, number of flowers and fruits and chlorophyll content of 'Seolhyang' (widely growing strawberry cultivar in Korea) were collected from three strawberry greenhouses located in Sacheon of Gyeongsangnam-do during the period of 2019-2020. A predictive model, Lasso regression was designed and validated through 5-fold cross-validation. The current study found that performance of the Lasso regression model is good to predict the number of flowers and fruits, when the MAPE value are 0.511 and 0.488, respectively during the model validation. Overall, the present study demonstrates that using AI based regression model may be convenient for farms and agricultural companies to predict yield of crops with fewer input attributes.