• 열처리공학회지
• /
• 제34권5호
• /
• pp.218-225
• /
• 2021

In this study, damping capacities were comparatively investigated for Mg-9%Al alloy with as-cast (AC) and fully discontinuous precipitates (DPs) microstructures, respectively. The DPs microstructure was obtained by solution treatment at 678 K for 24 h, followed by furnace cooling to RT. The AC microstructure was typically characterized by partially divorced eutectic β(Mg₁₇Al₁₂) phase particles distributed along the α-(Mg) matrix cell boundaries. The DPs microstructure showed lamellar morphology consisting of α and β thin layers with various interlamellar spacings. The DPs microstructure had better damping capacity than the AC microstructure in the strain-amplitude independent region, while in the strain-amplitude dependent region, the damping behavior was reversed. In view of the microstructural features of AC and DPs, the lower concentration of Al in the α-(Mg) phase for the DPs microstructure and the lower β phase number density for the AC microstructure would be responsible for the higher damping capacities in the strain-amplitude independent and strain-amplitude dependent regions, respectively.

• 대한안전경영과학회지
• /
• 제20권4호
• /
• pp.21-37
• /
• 2018

The purpose of this research was to test the effects of entrepreneurship and technological innovation capability on new product performance in SMEs and the moderating role of absorption capability. For this study, Research data were collected through questionnaire instruments from the sample of 374 employees in 18 SMEs of metropolitan area. The 336 sample was selected and analyzed by hierarchical regression technique. The results showed that entrepreneurship and technological innovation capability had a positive effect on new product performance. And also found out absorption capability had the moderate roles between all the three factors of technological innovation capability factors and new product performance, but not between all the three factors of entrepreneurship and new product performance. With the research results, the implications for technical management of SMEs were discussed, and the directions for future research were suggested.

• 한국기계가공학회지
• /
• 제18권2호
• /
• pp.44-51
• /
• 2019

With the goal of tissue regeneration for organs damaged through an accident or a disease, research on tissue engineering has been conducted to produce 3-D scaffolds that can support the cells in the attachment and growth for the cell proliferation and differentiation. A scaffold requires a suitable pore size and porosity to increase the nutrient circulation or oxygen supply for the attachment and growth of cells. The existing production methods such as solvent-casting particulate leaching, phase separation, and fiber bonding have certain disadvantages. With these methods, it is difficult to obtain a free desired shape. In addition, certain pore sizes and interconnectivities among the pores may not be guaranteed. To solve these problems, this study has fabricated a scaffold with a 3-D shaped nose using Alginate, which is a natural polymer obtained through Fused Deposition Modeling (FDM), one of the CAD/CAM-based Solid Freeform Fabrication (SFF) methods.

• 한국분말재료학회지
• /
• 제28권5호
• /
• pp.375-380
• /
• 2021

In this study, we investigate the effect of the duration of mechanical alloying on the microstructures and mechanical properties of ODS ferritic/martensitic steel. The Fe(bal.)-10Cr-1Mo pre-alloyed powder and Y₂O₃ powder are mechanically alloyed for the different mechanical alloying duration (0 to 40 h) and then constantly fabricated using a uniaxial hot pressing process. Upon increasing the mechanical alloying time, the average powder diameter and crystallite size increased dramatically. In the initial stages within 5 h of mechanical alloying, inhomogeneous grain morphology is observed along with coarsened carbide and oxide distributions; thus, precipitate phases are temporarily observed between the two powders because of insufficient collision energy to get fragmented. After 40 h of the MA process, however, fine martensitic grains and uniformly distributed oxide particles are observed. This led to a favorable tensile strength and elongation at room temperature and 650℃.

• 열처리공학회지
• /
• 제35권4호
• /
• pp.177-184
• /
• 2022

The present study aims to investigate the influence of Zn addition on hardness and microstructural characteristics of discontinuous precipitates (DPs) formed by isothermal aging in Mg-9%Al and Mg-9%Al-1%Zn alloys. To obtain large DPs volume fractions in the microstructure, the alloy specimens were solution-treated at 688 K for 24 h followed by water quenching, and then aged at 413 K for 48 h. The aged Mg-9%Al-1%Zn alloy had higher DPs content than the Mg-9%Al alloy, indicating that the Zn addition plays a beneficial role in enhancing age-hardening response. The DPs in the Zn-containing alloy possessed the higher hardness than those of the Zn-free alloy. Microstructural examination revealed that the increased hardness of the DPs resulting from the Zn addition is closely associated with the lower α-(Mg)/β(Mg₁₇Al₁₂) interlamellar spacing and the higher volume fraction of β phase layer of the DPs.

• 열처리공학회지
• /
• 제35권6호
• /
• pp.295-302
• /
• 2022

The present study aims to investigate the effect of Al content on microstructure and hardness of discontinuous precipitates (DPs) formed by continuous cooling (CC) in Mg-8%Al and Mg-9.5%Al alloys. The DPs had a wide range of (α+β) interlamellar spacings, which may well be attributed to the different transformation temperatures during CC. The higher Al content gave rise to the higher level of interlamellar spacings of the DPs, and thicker and larger amount of β phase layer in the DPs. It is noticeable that the Mg-9.5%Al alloy exhibited higher hardness of the DPs than the Mg-8%Al alloy, but the ratio of increase in hardness of the DPs compared to that of the as-cast state was similar regardless of the Al content. The reason was discussed based on the differences in microstructures of the DPs for the Mg-8%Al and Mg-9.5%Al alloys.

• 열처리공학회지
• /
• 제34권6호
• /
• pp.287-293
• /
• 2021

This study was intended to investigate the influence of Al content on hardness and microstructural characteristics of discontinuous precipitates (DPs) formed by isothermal aging in Mg-8.7%Al and Mg-10%Al alloys. In order to obtain large amount of DPs in the microstructure, the alloy specimens were solution-treated at 688K for 24 h followed by water quenching, and then aged at 418K for 48h. The Mg-Al alloy with higher Al content was characterized by higher volume fraction of DPs at the same aging condition, lower interlamellar spacing of the DPs, thinner β phase layer and higher β phase content in the DPs. This is closely related to the higher velocity of discontinuous precipitation process resulting from the higher Al supersaturation in the α-(Mg) matrix. The Mg-10%Al alloy showed higher hardness of the DPs and greater difference in hardness between as-cast state and DPs than the Mg-8.7%Al alloy.

• 열처리공학회지
• /
• 제36권4호
• /
• pp.223-229
• /
• 2023

This work was intended to investigate the effects of Zn content on microstructure and hardness of discontinuous precipitates (DPs) produced by continuous cooling (CC) in Mg-8%Al-X%Zn alloys with 0%, 0.5% and 1% of Zn contents (wt%). The DPs in the alloys possessed a wide range of (α+β) interlamellar spacings, which is attributed to the different transformation temperatures during CC. The higher Zn content resulted in the lower level of interlamellar spacings of the DPs, along with thinner and larger volume fraction of β phase layer in the DPs. It is noted that the DPs in the alloy with higher Zn content exhibited higher hardness, and that the ratio of increase in hardness of the DPs to that of the as-cast state was also increased with increasing Zn content. The reason was discussed on the basis of microstructural differences of the DPs in the Mg-8%Al-X%Zn alloys.

• 스마트미디어저널
• /
• 제13권2호
• /
• pp.122-128
• /
• 2024

오늘날 많은 기업을 중심으로 영업기회 확보와 영업 파이프라인 개선, 고객 만족도 증대라는 결과를 얻기 위한 수단으로 CRM을 사용하고 있다. 이와 같은 CRM은 고객의 행동 양식을 이해하여 기업경영의 질을 높이고, 조직의 업무절차 및 기술의 변화 과정을 마케팅, 판매, 고객 서비스 등에 활용하는 것이다. 본 연구에서는 중소기업에서 CRM 도입을 경제적 부담 없이 도입할 수 있도록 IP PBX를 이용한 소형 CRM을 설계 구현하여 성능을 측정한 결과 50인 이하의 사용자를 서비스할 수 있는 IP PBX와 연동하는 소형고객관리 시스템(SOHO CRM)으로 성능을 입증하였다.

• 대한임상검사과학회지
• /
• 제50권4호
• /
• pp.525-534
• /
• 2018

본 연구의 목적은 임상병리 전공 유사 취업연계가 가능한 다양한 자격증을 조사하고 취득 방법과 활용 여부를 알아보고자 하였다. 전공 외 취업 연계 가능 자격은 산업보건지도사, 도핑검사관, 청각관리사. 수화통역사, 보건교육사, 손해사정사, 생명보험 언더라이터, 행정관리사, 병원행정사, 보험심사관리사, 병원코디네이터 등이 있다. 임상병리기술학 전공 유사 관련 진출자격 현황으로는 임상시험코디네이터, 임상시험 모니터요원, 해부조직사, 화학분석기사, 위험물산업기사, 생물공학기사, 생물안전관리자, 생명공학기술지도사, 의료기기품질책임자, 실험동물기술원, 동물간호복지사, 선박의료관리자가 있다. 따라서, 임상병리사들이 현재 보유하고 있는 다양한 자격 현황의 사회분석조사가 필요할 것이며, 임상병리사 출신으로 다른 분야에서 근무하고 있는 현황조사도 필요할 것이다. 향후, 임상병리사는 개인의 업무역량 강화의 노력을 통하여 업무적 범위를 확대시키고, 사례를 공유하여 영역 확대와 전문성을 강화해야 할 것이라고 생각한다.