• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.8 no.4
• /
• pp.38-45
• /
• 1994

It is very imprtant and necessary to predict luminous enviroment in an interior space. This paper has de scribed about energy saving and evaluated interior visual environment in a office building having on/off turning control lighting system utilizing daylight. In order to predict the interior varior illumination distribution, the scale model w a m~a de and examined under various conditions, such ad difference of window glass, and color pattern of wall, floor, and also ceiling lighting system type. Ths paper suggests that basic fundamental data of lighting design ~rformancein the concept and schematic stages of design.

• Journal of Advanced Navigation Technology
• /
• v.24 no.6
• /
• pp.587-592
• /
• 2020

The giant information exchange enabled by the Internet of Things paradigm will likely exploit electrical lines as a ready-to-use infrastructure. The advantage of using the pre-installed infrastructure of wiring networks makes power line communication a competitive technology for broad-band communications. Therefore, there has been a growing interest towards the use of existing power line communication channels as an effective means for transmitting high speed data and Internet service. One of the main noise types affecting power line communication systems is the impulsive noise, and the focus of this work is on the impact of this impulsive noise on the performance of OFDM-QPSK systems. For the performance analysis of impulsive noise, data measured in three environments were used. Through the analysis, it is shown that OFDM-QPSK system outperforms QPSK system for most of the impulsive noise cases. Also, RS-coded OFDM-QPSK system can achieve good BER performance under 3 cases impulsive noise environment.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.20 no.3
• /
• pp.54-62
• /
• 2016

Micro plasma thruster (${\mu}PT$) was studied experimentally with a dual-stage micro-hollow cathode discharge (MHCD) plasma. Electrostatic-like acceleration exhibiting more directional and elongated exhaust plume was achieved by a dual layer MHCD at the total input power less than 10 W with argon flow rate of 40 sccm. V-I characteristic indicated that there was an optimal regime for dual-stage operation where the acceleration voltage across the second stage remained constant. Estimated exhaust plume length showed a similar trend to the analytic estimate of exhaust velocity which scales with an acceleration voltage. ${\mu}PT$ with multiple holes exhibited similar performance with single-hole thruster indicating that higher power loading is possible owing to decreased power through each hole. Boltzmann plot of atomic argon spectral lines showed average electron excitation temperature of about 2.6 eV (~30,170 K) in the exhaust plume.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.49 no.1
• /
• pp.68-72
• /
• 2012

In this paper, highly linear power amplifier using bandpass filter based on metamaterial and Composite Right- / Left-Handed (CRLH) structure is proposed. The proposed bandpass filter consist of the series capacitor, series microstrip line and the parallel inductor, parallel microstrip line. The insertion loss is minimized at operation frequency and the $2^{nd}$ harmonic is suppressed by the bandpass filter using the CRLH structure. And we improved the Adjacent Channel Leakage Ratio (ACLR) using the characteristic of the proposed bandpass filter. At 2.14 GHz, we have obtained the output power of 38.83 dBm, the $2^{nd}$ harmonic of .61.33 dBc, the $3^{rd}$ IMD of .54.67 dBc, and ACLR of .51.33 dBc at 5 MHz offset, -56.50 dBc at 10 MHz offset, respectively.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.5
• /
• pp.545-551
• /
• 2011

In this paper, we described a measurement method of an EIRP(Effective Isotropic Radiated Power) of a WCDMA base station using a pilot channel in line-of-sight environments. Especially we measured it in real base station environments in order to apply this method to domestic base station inspection test. Estimated EIRP results from measured value is -2 dB lower than theoretical values, which is calculated by the data of transmit antenna. The deviation of -2 dB is verified as a polarization mismatch between the base station antenna and a receiver antenna, and it can be calibrated. Therefore, we verified that our measurement method could be an effective tool to measure an EIRP in WCDMA base station inspection test.

• Proceedings of the KIEE Conference
• /
• 2008.09a
• /
• pp.271-272
• /
• 2008

실선로 전력 케이블의 부분방전 측정은 주위 전력설비의 신호들이 혼합되어 검출된다. 본시험에서는 배전전력 케이블을 대상으로 부분방전 신호의 방향 추정 시험을 하였다. 시험 조건으로 모의 선로와 활선 현장선로에서 시행하였다. 2개 HFCT 센서를 사용하여 방전 펄스를 검출하였고 미소신호를 검출하기 위하여 AMP와 필터를 설계하였다. 신호 분석을 위하여 1GS/S의 스코프를 사용하였으며 자동 방향추정 S/W를 제작하였다. S/W의 특징으로는 2개의 채널에서 동일한 펄스의 시간차를 분석하여 방향을 분석하도록 하였다. 센서의 간격이 20CM일 때 약1nS의 시간차가 발생하여 신호의 방향을 추정할 수 있었다.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.2
• /
• pp.285-290
• /
• 2010

We investigate the outage probability in terms of QoS (quality of service) in indoor PLC network. We consider various kinds of appliances for realistic indoor PLC network. For estimation of the outage probability, we calculate the time-varying channel responses considering the loading conditions based on regular human activities and include the additive noise. We calculate the outage probability for each terminal and investigate relationship between the outage probability and the channel length, and transmit powers. Our results suggest that the outage probability is increased when the channel length becomes longer because more appliances affect the amount of reduced channel capacity and is not improved distinctly for very high and low outage threshold by increasing the transmit power. However, we can see outage probability improvement for 30% outage threshold case by increasing the transmit power.

• Proceeding of EDISON Challenge
• /
• 2013.04a
• /
• pp.264-265
• /
• 2013

현재 반도체 산업에서는 고성능 저전력과 더불어 고 집적도가 가능한 재료 및 구조에 크게 주목하고 있고 여러 가지 이슈를 만족시키기 위해서 다양한 재료와 구조가 많이 연구 되고 있다. 특히 3-5족 화합물로 만들어진 나노선은 소자의 미세한 구조적 제어를 가능하게 하고 1차원 구조적 특성에 의해 전기적 특성이 우수하여 전계효과 트랜지스터(FET) 소자에 적용 시키기 적합하다고 알려져 있다.[1,2] 이번 연구에서는 최근 많이 연구되고 있는 GaAs 나노선을 기반으로 하는 전계효과 트랜지스터의 소자특성 및 전기적인 특성에 대해 EDISON 시뮬레이터를 이용해 알아보았다. 또한 채널 두께 및 길이와 게이트 산화막 층 두께에 따른 소자의 전기적 특성에 대해서도 연구하였다. 이를 통해 GaAs 나노선 기반 전계효과 트랜지스터의 최적화된 소자를 알아 보았다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.14 no.4
• /
• pp.423-434
• /
• 1989

In this paper, a PRS transmission system using TMRCP as the unit pulse is proposed, which solves the problems occur when the PRS method will be applied to the digital transmultiplexer for each channel. And a design technique which uses this PRS method for the FFT polyphase filter transmultiplexer concept is given. TMRCP-PRS signal require a bandwidth about 2.5KHz(including some guard-band) for a 4-KHz bandlimited voice channel. Therefore, in he 24 channel transmission line, it gives the same advantages as he ordinary PRS system and sloves the inter-channel interference problems. And its good speed-tolerance reduces the time-errors by the environments and the power loss, so it makes the system to be stable. The total system, however, attaces the filters for PCM-PRS, PRS-PCM conversion before and after the transmultiplexer respectively.

• Proceedings of the KIPE Conference
• /
• 2014.07a
• /
• pp.295-296
• /
• 2014

본 논문에서는 저 전압 스트레스 및 다채널 전류평형을 위한 Floating 전압 스택형 단일스위치 LED(Light Emitting Diode) 구동회로를 제안한다. 기존의 다채널 LED 구동회로는 LED 채널 수 만큼 boost converter가 필요하지만, 제안된 LED 구동회로는 단 하나의 buck converter와 n-1개의 balancing capacitor만을 필요로 한다. 기존 boost converter의 경우 모든 구성 요소는 LED 전압만큼의 높은 전압 스트레스를 갖지만 제안 회로의 경우 모든 구성 요소들은 기존 대비 절반 정도의 전압 스트레스를 갖는다. 또한 제안 LED 구동회로는 다채널의 LED 전류의 평형을 위하여 balancing capacitor만을 사용하기 때문에 높은 신뢰성과 비용의 효율성을 제공한다. 최종적으로 제안된 구동회로의 우수성과 이론적 분석의 타당성 검증을 위하여 46" 2채널 LED 구동회로를 위한 시작품을 제작하여 고찰된 실험결과를 제시한다.