• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2001.10a
• /
• pp.724-728
• /
• 2001

In this study, the dielectric breakdown of epoxy composites used for transformers was experimented and then its data were simulated by Weibull distribution probability. The dielectric breakdown characteristics origin in epoxy composites were examined and various effects of dielectric breakdown on epoxy composites were also discussed. As a result, first of all, speaking of dielectric breakdown properties, the more hardener increased the stronger breakdown strength at low temperature because of cross-linked density by the virtue of ester radical. And the breakdown strength of specimens with filler was lower than it of non-filler specimens because it is believed that the adding filler forms interface and charge is accumulated in it, therefore the molecular motility is raised, the electric field is concentrated, and the acceleration of electron and the growth of electron avalanche are early accomplished. In the case of filled specimens with treating silane, the breakdown strength become much higher since this suggests that silane coupling agent improves interfacial combination and relaxs electric field concentration. Finally, from the analysis of weibull distribution, it was confirmed that as the allowed breakdown probability was given by 0.1%, the applied field value needed to be under 21.5㎹/cm.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.6 no.3
• /
• pp.15-23
• /
• 1995

The antenna height of the mobile communications lower than its typical surroundings causes multipath fading usually resulting in fast fluctuations of both signal strength and wave length in mobile radio communications. Therefore, there have been developed and used various wave be- havior prediction models, in some other foreign countries, based on the measurement data rather than on theoretical derivation. The main purpose of this paper is to examine the wave propagation characteristics particularly in Korean terrain with the measurements made in four types of different areas - a large city area, a small city area, a flat terrain area, and a mountain area. Those areas have been classified according to the terrain characteristics with which the particular area contains, such as scale and number of buildings, highways, trees, and so on. With the measured data of the field strength in the frequency band of pager system obtained from those four different areas, we compared the calculated ones from both Hata's and TIREM prediction models which are often applied in Korea.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.254-254
• /
• 2010

기존의 부유게이트를 이용한 플래시 메모리는 소자의 크기를 줄이는데 한계가 있기 때문에 이를 해결하기 위한 비휘발성 메모리 소자로 CTF가 큰 관심을 받고 있다. CTF 메모리 소자는 기존의 플래쉬 메모리 소자에 비해 쓰고 지우는 속도가 빠르고, 데이터의 저장 기간이 길며, 쓰고 지우는 동작에 의한 전계 스트레스에 잘 견뎌내는 장점을 가지고 있다. 최근 터널 장벽의 두께와 종류를 변화시킨 소자의 전기적 특성을 향상하기 위한 연구들은 많이 있었지만, 터널 장벽의 적층구조 변화에 대한 연구는 비교적 적다. 본 연구에서는 터널 장벽의 적층구조 변화에 따른 CTF 메모리 소자의 프로그램 동작 특성 변화에 대해 관찰하였다. 기존의 단일 산화막 (silicon oxide; O) 대신 산화막과 higk-k 물질인 질화막 (silicon nitride; N)을 조합하여 ON, NON, ONO로 터널 장벽의 여러 가지 적층 구조를 가진 소자를 설계하여 각 소자의 프로그램 동작 특성을 조사하였다. CTF 메모리 소자의 프로그램 동작 특성을 거리와 시간에 따른 연속방정식, Shockley-Read-Hall 유사 트랩 포획 방정식 및 푸아송 방정식을 유한차분법을 사용하여 수치해석으로 분석하였다. WKB 근사를 이용하여 인가된 전계의 크기에 따라 터널링 현상에 의해 트랩층으로 주입하는 전자의 양을 계산하였다. 또한, 터널 장벽의 적층구조 변화에 따른 트랩층의 전도대역과 트랩층 내부에 분포하는 전자의 양을 시간에 따라 계산하였다. 계산 결과에서 터널 장벽의 적층구조 변화가 CTF 메모리 소자의 프로그램 동작 특성에 미치는 영향을 알 수 있었다. 소자의 프로그램 동작 특성을 분석함으로써 CTF 메모리 소자에 적합한 터널 장벽의 구조를 알 수 있었다. 기존의 단일 산화막보다 얇아진 산화막의 두께와 낮은 질화막의 에너지 장벽 높이로 전자의 터널링 현상이 더 쉽게 일어나기 때문에 ON 구조로 터널 장벽을 적층한 CTF 메모리 소자의 프로그램 속도가 가장 빠르게 나타났다. 이러한 결과는 터널 장벽의 구조적 변화가 전자의 터널 효과에 미치는 영향을 이해하고 프로그램 동작 속도가 빠른 CTF 메모리 소자의 최적화에 도움을 줄 수 있다.

• Korean Journal of Remote Sensing
• /
• v.16 no.1
• /
• pp.65-72
• /
• 2000

Scattering coefficients of randomly rough lossy dielectric surfaces were computed by using the FDTD(Finite-Difference Time-Domain) method and the Monte Carlo method in this paper. The FDTD method was applied to compute electromagnetic wave scattering characteristics at any incident angles, any linear polarizations by dividing the computation region into the total-field region and the scattered-field region. The radar cross sections(RCS) of conducting cylinders have been computed and compared with theoretical results, measurement data and the results from the method of moment(MoM) to verify the FDTD algorithm. Then, to apply the algorithm to compute scattering coefficients of distributed targets, a two-dimensionally rough surface was generated numerically for given roughness characteristics. The far-zone scattered fields of 50 statistically independent dielectric rough surfaces were computed and the scattering coefficient of the surface was calculated from the scattered fields by using the Monte Carlo method. It was found that these scattering coefficients agree well with the SPM(Small Pertubation Method) model in its validity region.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.6 no.4
• /
• pp.28-36
• /
• 1995

The use of image planes can reduce effectively the radiated emissions from a printed circuit board. This work deals with the influence of image planes on radiation from current trace. The configu- rations of one and two layers of image planes on both sides of current trace are proposed. The radiated emissions of those configurations have been calculated by solving a set of electric field integral equations by the method of moments. The induced current distributions on image planes and the radiation patterns are analyzed for different configurations of image planes, the distance between current trace and image planes, and the frequency of signal current.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.8
• /
• pp.893-899
• /
• 2010

In this paper, the design of a new bandpass filter based on the modified circular mushroom metamaterial structure is proposed. In detail, half circular mushroom cells are used as the zeroth order resonators(ZOR), and an intermediate gap is adopted to introduce the coupling between neighboring ZOR resonators. The proposed bandpass filter design is validated by the circuit and 3D EM simulations and measurements compared to the target specifications, and the metamaterial properties are proved by the ZOR field distributions and dispersion diagram. Also, the effect of size reduction is addressed.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.3
• /
• pp.515-522
• /
• 1994

The radiation characteristics of the conical corrugated feed horn are analyzed by the Gaussian beam mode theory. the electric field over the aperture can be expanded in terms of a set of Gaussian-Laguerre modes. It is proved that these modes are the solutions of the wave epuations for the paraxial approximation. A method, using the sum of the mode expansion coefficients instead of calculation only the fundamental mode, is presented in order to reduce the radiation pattern error. For illustrative examples, the radiation patterns of the corrugated horn antenna operting over C, Ku, and mm-wave band are calculated. Our results agree well with the results obtained by the vector potential method over each band, and also agree well with the measured value at 6.175GHz.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.36D no.4
• /
• pp.77-85
• /
• 1999

By assuming a linearly graded depletion edge approximation in the intrinsic MOS region and by taking into account the mobility variation dependent on both lateral and vertical fields, a physics-based analytical model for a short-channel(n-channel) MOSFET is suggested. Derived expressions for the threshold voltage and the drain current of typical MOSFET is structures could be used in a unified manner for all operating range. The threshold voltage was calculated by changing following variables : channel length, drain-source voltage, source-substrate voltage, p-substrate doping level, and oxide thickness. It is shown that the threshold voltage decreases almost exponentially as the channel length decreases. In addition, the short-channel threshold voltage roll-off, the channel length modulation and the electron mobility degradation can be derived within a satisfactory accuracy.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.27 no.3
• /
• pp.72-78
• /
• 1990

In this paper, the physical meanings of LDD optimization are treated by numerical simulation and related experiments are attempted to analyzed the optimized LDD structure. Firstly, according to the numerical analysis, the electric field under the n-region near drain is low and uniformly distributed and the current flow is widely distributed in this region under the optimized conditions. It is also found that this optimized point should be achieved by globally optimizing all the process and electrical conditions. Secondly, the maximum electric field, which is obtained from the substrate current to the drain current ratio, is minimized under the optimized condition according to the experiment. Further, the device lifetime is maximized and the n-resistance is changed smoothly from the channel resistance to the $n^+$junction resistance.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.15 no.7
• /
• pp.870-874
• /
• 2005

This paper presents capacitive tactile sensor that can detect normal and shear forces. This tactile sensor consists of index plate, sensing plate, and elastic dielectric layer. The calculated sensing character is based on the changes of space between two horizontal plate. Larger overlap areas and narrow space between top and bottom plate guarantees higher sensitivity. Tactile sense information can be calculated from the changes of phase of output signal. The symmetric arrangement of sensing plates makes the manufacturing process easier and guarantees the stability of the structure. In this paper, the sensor structure is designed, the mechanism of the Proposed sensor is theoretically explained, and the simulated result is presented.