• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.05a
• /
• pp.153-157
• /
• 2002

This paper deals with the relationships between MgO manufacturing condition and misfiring at low temperature. The characteristics of MgO are affected by substrate temperature and MgO deposition current. In this study. the. substrate temperature was varied from $100^{\circ}C$ to $200^{\circ}C$. And the MgO deposition current was varied from 5mA to 20mA. As a result. the misfiring at low temperature was decreased in the panels with substrate temperature $200^{\circ}C$ and MgO deposition current 5mA. These results may be explained that the higher substrate temperature and lower MgO deposition current makes the denser film formation.

• Proceedings of the KIEE Conference
• /
• 2003.07c
• /
• pp.1592-1594
• /
• 2003

This paper presents the deposition and characterization of microcrystalline silicon(${\mu}c$-Si:H) films by HWCVD(Hot-wire Chemical Vapor Deposition) method at low substrate($300^{\circ}C$). The filament temperature, pressure and $SiH_4$ concentration were determined to be a critical parameter for the deposition of poly-Si films. Series A was deposited under the conditions of $1380^{\circ}C$(Tf), 100 mTorr and $2{\sim}10%\{SC:SiH_4/(SiH_4+H_2)\}$ for 60 min. Series B was deposited under the conditions of $1400{\sim}1450^{\circ}(T_f)$, 30 mTorr and $2{\sim}12%$(SC) for 60 min. The physical characteristics were measured by Raman and FTIR spectroscopy, dark and photoconductivity measurements under AM1.5 illumination.

• Proceedings of the KIEE Conference
• /
• 2003.07c
• /
• pp.1595-1597
• /
• 2003

This paper presents the deposition of ${\mu}c$-Si:H thin-film and fabrication of a solar cell by VHF-PECVD method. The ${\mu}c$-Si:H thin films and pin-type solar cells are fabricated using multi-chamber cluster tool system. A 7.4% conversion efficiency was achieved from ${\mu}c$-Si:H thin film solar cells with total thickness less than $5{\mu}m$. The physical characteristic was measured by Raman spectroscopy, Solar cell characteristic was measured under AM1.5 illumination.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.42-42
• /
• 2007

In the future, electronic components will be integrated on flexible polymer substrates and then miniaturized by thin films using suitable thin film technologies. In this article, the concept of a room temperature CVD is demonstrated using $Bi_3NbO_7$ (BNO) films with a cubic fluorite structure and their structural and electrical properties were investigated in films deposited without substrate heating. Effects of substrate temperature on electrical properties of BNO films were also studied. Films deposited without substrate heating (real temperature of $50^{\circ}C$) show partially crystallized BNO single phases with grain size of approximately 6.5 nm. Their dielectric and leakage properties are comparable to those of films deposited by pulsed laser deposition at room temperature. The concept of room temperature CVD will become a new paradigm in the deposition of dielectric thin films for flexible electron device applications.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.169-170
• /
• 2007

In this paper we report upon an investigation into the effect of sputter pressure and RF power on the electrical properties of Gallium doped zinc oxide (GZO) film. GZO films were deposited on glass substrate without substrate temperature by RF magnetron sputtering from a ZnO target mixed with 5 wt% $Ga_2O_3$. Argon gas pressure and RF power were in the range of 1~11 mTorr, and 50~100 W, respectively. However, the resistivity of the film was strongly influenced by the sputter pressure and RF power. We were able to achieve as low as $1.5{\times}10^{-3}\;{\Omega}cm$, without substrate temperature.

• Korean Journal of Metals and Materials
• /
• v.48 no.12
• /
• pp.1109-1115
• /
• 2010

ZnO thin films were deposited on Si(100) substrates at low temperatures ($44^{\circ}C{\sim}210^{\circ}C$) by atomic layer deposition using DEZn (diethyl zinc) and water as precursors. The film thickness was measured by ellipsometry calibrated with cross-sectional TEM. The phase formation, microstructure evolution, UV-absorbance, and chemical composition changes were examined by XRD, SEM, AFM, TEM, UV-VIS-NIR, and AES, respectively. A uniform amorphous ZnO layer was formed even at $44^{\circ}C$ while stable crystallized ZnO films were deposited above $90^{\circ}C$. All the samples showed uniform surface roughness below 3 nm. Fully crystallized ZnO layers with a band-gap of 3.37 eV without carbon impurities can be formed at substrate temperatures of less than $90^{\circ}C$.

• Korean Journal of Metals and Materials
• /
• v.48 no.5
• /
• pp.449-455
• /
• 2010

To enhance the efficiency of dye sensitized solar cells, we proposed crystalline anatase-$TiO_{2}$ by using a low temperature process ($150^{\circ}C{\sim}250^{\circ}C$). We successfully fabricated 30 nm-$TiO_{2}$ at a fixed atomic layer deposition condition of 1.0 sec of TDMAT pulse, 20 sec of TDMAT purge, 0.5 sec of H$_{2}$O pulse, and 20 sec of H$_{2}$O purge. In order to examine the microstructure, phase, and band-gap of the TiO$_{2}$ respectively, we employed a Nano-Spec, transmission electron microscope, high resolution XRD, Auger electron spectroscopy, scanning probe microscope, and UV-VIS-NIR. We were able to fabricate a crystalline anatase-phase of 30 nm-TiO$_{2}$ successfully at temperatures above $180^{\circ}C$. Our results showed that our proposed low temperature ALD process (below $200^{\circ}C$) might be applicable to glass and flexible polymer substrates.

• Journal of the Korean Magnetics Society
• /
• v.17 no.2
• /
• pp.81-85
• /
• 2007

MnTe layers of high crystalline quality were successfully grown on Si(100) : B and Si(111) substrates by molecular beam epitaxy (MBE). Under tellurium-rich condition and the substrate temperature around $400^{\circ}C$, a layer thickness of $700{\AA}$ could be easily obtained with the growth rate of $1.1 {\AA}/s$. We investigated the structural, magnetic and transport properties of MnTe layers by using x-ray diffraction (XRD), superconducting quantum interference device (SQUID) magnetometry, and physical properties measurement system (PPMS). Characterization of MnTe layers on Si(100) : B and Si(111) substrates by XRD revealed a hexagonal structure of polycrystals with lattice parameters, ${\alpha}=4.143{\pm}0.001{\AA}\;and\;c=6.707{\pm}0.001{\AA}$. Investigation of magnetic and transport properties of MnTe films showed anomalies unlike antiferromagnetic powder MnTe. The temperature dependence of the magnetization data taken in zero-field-tooling (ZFC) and field-cooling (FC) conditions indicates three magnetic transitions at around 21, 49, and 210 K as well as the great irreversibility between ZFC and FC magnetization in the films. These anomalies are attributable to a magnetic-elastic coupling in the films. Magnetization measurements indicate ferromagnetic behaviour with hysteresis loops at 5 and 300 K for MnTe polycrystalline film. The coercivity ($H_c$) values at 5 and 300 K are 55 and 44 Oe, respectively. In electro-transport measurements, the temperature dependence of resistivity revealed a noticeable semiconducting behaviours and showed conduction via Mott variable range hopping at low temperatures.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.6
• /
• pp.71-77
• /
• 2014

In this paper, we investigated the effects of high-energy electron beam irradiation (HEEBI) on the optical transmittance of InGaZnO (IGZO) films grown on transparent Corning glass substrates, with a radio frequency magnetron sputtering technique. The IGZO thin films deposited at low temperature were treated with HEEBI in air at room temperature (RT) with an electron beam energy of 0.8 MeV and doses of $1{\times}10^{14}-1{\times}10^{16}electrons/cm^2$. The optical transmittance of the IGZO films was measured using an ultraviolet visible near-infrared spectrophotometer (UVVIS). The detailed estimation process for separating the transmittance of HEEBI-treated IGZO films from the total transmittance of IGZO films on transparent substrates treated with HEEBI is given in this paper. Based on the experimental results, we concluded that HEEBI with an appropriate dose of $10^{14}electrons/cm^2$ causes a maximum increase in the transparency of IGZO thin films. We also concluded that HEEBI treatment with an appropriate dose shifted the optical band gap ($E_g$) toward the lower energy region from 3.38 to 3.31 eV. This $E_g$ shift suggested that HEEBI in air at RT with an appropriate dose acts like a thermal annealing treatment in vacuum at high temperature.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.309.1-309.1
• /
• 2014

III-N계 기반의 광 반도체는 직접 천이형 넓은 밴드갭 구조를 갖고 있기 때문에 자외선에서 가시광을 포함한 적외선까지 포함한 폭 넓은 발광이 가능하여 조명 및 디스플레이 관련 차세대 광원으로 많은 관심을 받고 있다. 하지만 p형 GaN의 경우, 상온에서 도펀트로 사용되는 마그네슘(Mg)이 수소(H)와 결합하여 보상 효과를 나타내기 때문에 높은 정공농도를 갖기에 어려움이 있다고 알려져 있다. 따라서, 대부분의 연구 그룹에서는 GaN계 LED 소자를 성장 후 rapid thermal annealing 공정이 요구되고 있고, 최근에는 박막 성장 후 반응로 내에서 자체적으로 열처리를 진행하고 있는 실정이다. 하지만, 열처리 조건은 LED 소자의 발광특성에 큰 영향을 주기 때문에 본 연구에서는 반응로에서 열처리가 된 LED 샘플에 대해 추가적인 열처리 공정의 유무에 따른 GaN계 LED소자의 광학적 및 전기적 특성에 대해 알아보고자 하였다. 금속유기화학증착법을 이용하여 c-면 사파이어 기판에 저온 GaN 완충층 및 $2.0{\mu}m$두께의 GaN 박막을 성장한 후, $3.0{\mu}m$두께의 n-형 GaN에피층과 InGaN/GaN 5주기의 양자우물구조를 형성하고 $0.1{\mu}m$두께의 p형 GaN층을 성장하였다. P-형 GaN층 성장 후 온도를 내리면서 $750^{\circ}C$, N2 분위기에서 5분간 Mg 활성화를 위한 열처리를 반응로에서 in-situ로 진행하였다. 그 후 급속열처리 장비에 장입하여 $650^{\circ}C$, N2 분위기에서 5분간 추가적인 열처리를 진행하여 추가 열처리 유무에 따른 LED소자의 특성을 분석하였다. 추가적인 열처리 유무에 따른 LED소자의 레이저 여기에 의한 포토루미네선스 스펙트럼과 전계발광 스펙트럼을 조사한 바, 포토루미네선스 스펙트럼의 경우 추가적인 열처리를 진행하였을 경우, 이전보다 발광 세기가 감소함을 나타내었다. 이는 추가적인 열처리에 의해 InGaN/GaN 활성층이 손상되었기 때문이라고 추측된다. 그러나 전계발광 스펙트럼에서는 활성층이 손상되었음에도 불구하고 전계 발광세기가 3배 가량 증가한 것을 확인할 수 있었다. 또한, 20 mA 인가 시 4.2 V 에서 3.7 V로 전압이 감소하였다. 상기 결과로 미루어 볼 때 열처리에 의한 InGaN/GaN 활성층 손상에도 불구하고 광 세기가 크게 증가한 것은 금속유기화학증착장치의 in-situ 열처리에 의한 Mg가 충분히 활성화되지 못하였고, 추가적인 열처리에 의하여 p형 GaN에서 Mg-H 복합체의 분리로 인한 Mg 활성화가 더욱더 효과적으로 이루어졌기 때문이라고 추측된다.