• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.8A
• /
• pp.1126-1132
• /
• 1999

In this paper, we consider the superposed 16-QAM CDMA system for subband coded (SBC) image transmissions. We divide the SBC image bit into two group according to its significance. First, we investigate the average bit error rate (BER) of the overall system when the significance of bits is ignored. Next, we investigate the optimal signal constellation and processing gain that maximizes the peak signal-to-noise ratio (PSNR) of SBC image, subject to a fixed power and bandwidth constraint. We examine the performance improvement over the conventional equal distane, equal processing gain system, and the equal error protection (EEP) system.

• Proceedings of the KIPE Conference
• /
• 2019.11a
• /
• pp.7-9
• /
• 2019

이 논문은 이관성 시스템에서 능동 외란 제거 제어(Active Disturbance Rejection Control, ADRC) 기반의 진동 저감 알고리즘을 제안한다. 제안한 방법은 축소 차원 ADRC를 기반으로 구성하였다. ADRC 이론에 기반한 제어 이론은 전체 토크 중 전동기 측의 관성 모멘트에 대한 토크를 제외한 모든 토크를 외란 성분이라 설정한다. 외란에 대한 가속도 성분을 전체 외란(Total Disturbance)이라고 설정하고, 이를 추정하여 보상한다. 축소 차원 ADRC의 차수가 낮아서, 축소 차원 ADRC의 대역폭을 기존 ADRC의 대역폭보다 크게 설정할 수 있다. 그리고, 증가한 이득과 실질적인 구현을 고려하여, 이산 시간 영역에서 설계하였다. 제안된 알고리즘의 안정도를 확보하고, 성능을 높이기 위하여, 추정하는 제정수의 값을 실제 값보다 작게 설정하였다. 제안한 방법은 기계시스템의 공진에 의한 영향을 감쇄시킬 수 있다. 제안한 방법을 검증하기 위해, 시뮬레이션과 실험을 수행하였다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.4
• /
• pp.688-697
• /
• 2017

It is very difficult to solve mathematically the optimal control problem for non - linear mobile robots to move to target points with minimum energy related to velocity, acceleration and angular velocity in minimum time. This paper proposes a method to obtain optimal control gains with which mobile robots move with minimum energy related to velocity, acceleration and angular velocity in minimum time using genetic algorithms. Mobile robots are non - linear systems so that their optimal control gains depend on initial positions. Hence initial positions are divided into some partition points and optimal control gains are obtained at each partition point with genetical algorithms. These optimal control gains are used to train neural networks that generate proper control gains at arbitrary initial position. Finally computer simulation studies have been conducted to verify the effectiveness of the method proposed in this paper.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.10 no.3
• /
• pp.403-411
• /
• 2015

In this paper, we propose a design method for the position and speed controller, current control of a Brushless Direct Current(BLDC) motor using back-stepping design techniques. Further, to stabilize the whole system, and proposes a method for setting the appropriate gain control to improve the tracking performance. By applying the proposed controller to 120W BLDC motors were tested for the ability to follow the position, velocity and current reference. Since the simulation results of the steady state error is within 1%, we were able to show the usefulness of the tracking performance of the proposed controller.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.2A
• /
• pp.96-101
• /
• 2003

This paper is on the user equipment (UE) side time tracker design and implementation of the wideband code division multiple access (WCDMA) system. The time tracker is constructed as a second order closed loop including time error detector (TED), loop filter (LP), numerically controlled oscillator (NCO), and sample selector (SS). Through the simulation, we found the gain of the TED as a function of the CPICH power contribution to the total transmission power of the base station. Also we derived the transfer function of the loop and the BER versus DPCH power relationships where timing offsets and loop noise bandwidths are used as parameters. In the curve, we can conclude that there are appropriate loop noise bandwidths according to the given environments for the better performance.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.9 no.2
• /
• pp.142-149
• /
• 2004

PMLSM(Permanent Magnet linear Synchronous Motor) has widely applied to industrial automations, machine tools and semiconductor equipments due to the merit on the reduction of noise, vibration and the superior dynamic characteristics in comparison to the conventional method, which uses mechanical transfer equipments. Especially, in the case of applying to Z-axis operation structure, control system needs the method of an initial angle setting and the improvement of up/down operation characteristics. This paper proposes an initial angle setting algorithm and a variable gain schedule using real speed and moving direction to improve up/down operation characteristics. The effectiveness of proposed algorithms Is demonstrated by comparing to a conventional gain system via 4-point absolute positions profile with each velocity, acceleration and deceleration.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.1960_1961
• /
• 2009

본 논문에서는 PID, PWM, HSC, 컴퓨터와의 호스트 통신, 외부 DAC 인터페이스를 FPGA만을 이용하여 하나의 Chip에 구현하고 DC 서보 모터의 속도를 설정한 제어 상태로 안정화시킬 수 있는 시스템을 구현하고자 한다. 컴퓨터에서 설정한 설정치(SV)와 P, I, D의 이득 값을 호스트 통신으로 데이터 블록은 해당 블록으로 전달하며 DC 서보 모터의 엔코더에서 나오는 $90^{\circ}$ 위상차가 있는 2채널의 펄스는 HSC 블록을 거쳐 프로세스치(PV)를 생성 고 이로부터 얻어진 SV와 PV의 편차(E)를 산출한 후 PID 제어 동작을 수행한다. 그 결과인 조작치(MV)를 PWM 블록에 제공하여 실질적으로 DC 서보 모터를 구동하는 H-bridge 회로를 구동한다. 또한 FPGA 내부의 SV, PV, E, MV를 오실로스코프로 계측하기 위해 DAC 인터페이스 블록을 첨가 하여 외부 디지털 아날로그 변환기(DAC)를 제어 하였다.

• Journal of Satellite, Information and Communications
• /
• v.12 no.1
• /
• pp.72-75
• /
• 2017

In this paper, we design the circular slits in the parch antenna for size reduction and high gain working at 900 MHz. Modifying the rectangular type patch, we decrease the antenna real-estate, leading to antenna miniaturization with added circular slits in itself. The antenna is tuned for under -30 dB return loss by adjusting the number of circular slits and their radii, and its design is performed for the maxim bean pattern of 4 dBi gain. Compared with the antenna without circular slits, the designed antenna shows 20 MHz downward shift of frequency, proving that the size reduction is achieved with this antenna design.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.3 no.4
• /
• pp.388-398
• /
• 1998

In constructing fuzzy control systems. there are many parameters such as rule base. membership functions. inference m method. defuzzification. and I/O scaling factors. To control the system in properly using fuzzy logic. we have to consider t the correlation with those parameters. This paper deals with self-tuning of fuzzy control systems. The fuzzy controller h has parameters that are input and output scaling factors to effect control output. And we propose the looklongleftarrowup table b based self-tuning fuzy controller. We propose the PMTM(Plus-Minus Tuning Method) for self tuning method, self-tuning the initial look-up table to the appropriate table by adding and subtracting the values.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.2
• /
• pp.276-282
• /
• 2006

PID controller has been widely used in industry. Because it has a simple structure and robustness to modeling error. But it is difficult to have uniformly good control performance in system parameters variation or different velocity command. In this paper, we propose an adaptive PID controller based on a gradient descent learning. This algorithm has a simple structure like conventional PID controller and a robustness to system parameters variation and different velocity command. To verify performances of the proposed adaptive PID controller, the speed control of nonlinear DC motor is performed. The simulation results show that the proposed control systems are effective in tracking a command velocity under system parameters variation.