• Journal of Convergence for Information Technology
• /
• v.12 no.4
• /
• pp.338-344
• /
• 2022

It is necessarily required in developing Si-based anode materials for lithium ion batteries, and the related researches are actively working especially in Si-carbon composite material. On the other hand, the photovoltaic and semiconductor industries discard huge amount of Si resources, facing the environmental issue. In this study, recycled Si resource is adopted to obtain Si-carbon composite for LIB(Lithium-Ion Batteries). In order to improve high-capacity retention characteristics and cycle stability of a Si anode material for the LIB, two differenct composites having a mass ratio of silicon and pitch of 1:1 and 2:1 are synthesized and electrochemical characteristics of the anode material manufactured by simple self-assembly method. This result in excellent initial capacity with stable cycle life, and confirming the potential use of recycled Si material for LIB.

• Korean Chemical Engineering Research
• /
• v.56 no.4
• /
• pp.561-567
• /
• 2018

In this study, the electrochemical characteristics of Silicon/Carbon anode materials were analyzed to improve the cycle stability of silicon as an anode materials of lithium ion battery. Porous silicon was prepared from TEOS by the $st{\ddot{o}}ber$ method and the magnesiothermic reduction method. Silicon/Carbon anode materials were synthesized by varying the mass ratio between porous silicon and pitch. Physical properties of the prepared Silicon/Carbon anode materials were analyzed by XRD and TGA. Also the electrochemical performances of Silicon/Carbon anode materials were investigated by constant current charge/discharge, rate performance, cyclic voltammetry and electrochemical impedance tests in the electrolyte of $LiPF_6$ dissolved in organic solvents (EC : DEC = 1 : 1 vol%). The Silicon/Carbon anode composite (silicon : carbon = 5 : 95 in weight) has better capacity (453 mAh/g) than those of other composition cells. The cycle performance has an excellent capacity retention from 2nd cycle to 30th cycle.

• Journal of the Korean Ceramic Society
• /
• v.40 no.3
• /
• pp.241-248
• /
• 2003

We controlled the amount of Y$_2$O$_3$additives, 8 mol% and 10 mol%, and the type of carbon pore former, activated carbon and carbon black, to improve the strength of porous NiO-YSZ anode materials for solid oxide fuel ceil. The 3-point flexural strength, porosity and electrical conductivity were evaluated. As a result, the strength of anode materials with the addition of carbon black was markedly improved. The strength of NiO-10 mol%YSZ sintered at relatively higher temperature was higher than that of NiO-8 mol%YSZ materials. The electrical conductivity of NiO-10 mol%YSZ with carbon black was evaluated as much as 10$^2$∼10$^3$S/cm at 700$^{\circ}C$∼1000$^{\circ}C$ in reducing atmosphere.

• Electrical & Electronic Materials
• /
• v.29 no.7
• /
• pp.10-20
• /
• 2016

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.298.2-298.2
• /
• 2016

가공이 까다로운 소재를 가공하기 위한 공구에 적용하기 위해서 Al의 함량이 높은 AlTiN 소재가 개발되어 적용되고 있으며, 이 소재는 공구의 수명향상을 위한 표면처리 소재로 각광을 받고 있다. 본 연구에서는 음극 아크 증착 시 거대입자가 박막에 증착되어 결함을 만들기 때문에 그 밀도를 낮추기 위해서 음극 아크 증착을 이용하여 공정 변화에 따른 AlTiN 박막의 표면형상을 관찰하고 특성을 평가하였다. 또한 빗각 증착을 적용하여 제작한 AlTiN 박막의 특성을 평가하였다. Al-25 at.%Ti 합금타겟을 음극 아크 소스에 장착하여 AlTiN 박막을 코팅하였다. 시편은 스테인리스 강판(SUS304)과 초경(tungsten carbide; WC)을 사용하였다. 음극 아크 소스에 인가되는 전류가 낮을수록 AlTiN 박막 표면에 거대입자의 밀도가 낮아졌으며, 기판 전압과 공정압력이 높을수록 AlTiN 박막의 표면에 존재하는 거대입자의 밀도가 낮아지는 경향을 보였다. 이를 통하여 거대입자밀도를 낮추는 기초공정을 도출하였다. AlTiN 박막 제작 시 빗각을 적용한 결과 $60^{\circ}$의 빗각을 적용한 다층 박막에서 약 33 GPa의 경도를 보였다. 본 연구를 통해 음극 아크 증착을 이용하여 거대입자의 밀도가 낮은 박막을 제작할 수 있는 공정을 도출하였고, 빗각증착을 적용하면 경도가 향상되는 결과를 확인하였다. 이를 통해 절삭공구 등과 같이 고경도의 코팅물성 유지를 위한 코팅분야에 응용이 가능할 것으로 판단된다.

• Applied Chemistry for Engineering
• /
• v.27 no.4
• /
• pp.415-420
• /
• 2016

To enhance electrochemical performances of anode materials, the surface of coal tar pitch (CTP) was modified by incorporating heteroatoms through chemical treatment with phosphoric acid ($H_3PO_4$). The prepared anode materials with modified CTP was analyzed by XRD, FE-SEM and XPS. The electrochemical performances of modified CTP were investigated by constant current charge/discharge test, rate performance, cyclic voltammetry and impedance tests using the electrolyte of $LiPF_6$ dissolved in the mixed organic solvents (ethylene carbonate : dimethyl carbonate = 1 : 1 vol% + vinylene carbonate 3 wt%). The coin cell using modified CTP ($H_3PO_4/CTP$ = 3 : 100 in weight) has better initial capacity and initial efficiency (489 mAh/g, 82%) than those of other composition coin cells. Also, it was found that the capacity retention was 86% after 30 cycles and the rate capability was 87% at 2 C/0.1 C.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.11a
• /
• pp.103.2-103.2
• /
• 2011

리튬이차전지의 음극물질로서 상용화되고 있는 탄소재료중 흑연은 전기자동차에 적용하기에는 낮은 용량과 나쁜 출력특성을 갖고 있어 지금보다 두배이상의 용량과 출력특성이 좋은 음극소재의 개발이 필요하다. 또 다른 음극물질로 실리콘은 흑연에 비해 월등히 높은 이론용량을 나타내고 있지만 실리콘이 리튬이온과 만나면 부피가 4배이상 팽창하여 사이클이 진행될수록 충방전 용량이 급격히 감소하게 된다. 그래서 본 연구에서는 이 두 음극소재를 상호보완하기 위해 천연흑연을 산처리 과정을 통해 제조된 팽창흑연을 매트릭스로 사용하여 팽창흑연에 실리콘을 충진 시키는 연구를 진행하였다. 팽창흑연에 실리콘을 충진시킴으로써 1C일 때 약 650mAh/g의 용량을 나타내었으며, 50cycle이 진행된 후에도 비교적 안정한 사이클 특성을 나타내었다.

• Economic and Environmental Geology
• /
• v.55 no.6
• /
• pp.661-669
• /
• 2022

The need for miniaturization, high efficiency, and green energy resources as an energy storage device through the development of various electronic device has emerged. Accordingly, nanomaterials with excellent electrochemical properties, such as graphene and graphene hybrids, are attracting attention as promising materials. In particular, in the electric vehicle industry, cost reduction of secondary batteries is a key factor that can determine the spread of related industries, and it is most important to analyze R&D trends for battery material technology and respond to future technological development directions. Therefore, in this study, we tried to suggest a direction for R&D activities in the future by analyzing patent trends for graphene anode material technology for secondary batteries and deriving implications. As a result, in the case of anode material technology, the proportion of foreigners in the US and European patent markets was higher than in the Korean and Japanese patent markets, which means that the US and European marketability is high. In addition, Japanese applicants are filing high-level applications not only in the Japanese patent market but also in other countries suggests that Japan is leading the technology in this field. Lastly, the proportion of research institutes in the patent market of Korea and the US remains high compared to that of Japan and Europe, indicating that the commercialization of technology is still slow in those countries. Therefore research institutes and companies in Korea will have to establish their own strategies for developing and securing materials using the results of patent trends in major countries and major companies analyzed in this study.

• Korean Chemical Engineering Research
• /
• v.54 no.4
• /
• pp.459-464
• /
• 2016

In this study, the electrochemical characteristics of porous silicon/carbon composite anode were investigated to improve the cycle stability and rate performance in lithium ion batteries. In this study, the effect of TEOS and $NH_3$ concentration, mixing speed and temperature on particle size of nano silica was investigated using $St{\ddot{o}}ber$ method. Nano porous Si/C composites were prepared by the fabrication processes including the synthesis of nano $SiO_2$, magnesiothermic reduction of nano $SiO_2$ to obtain nano porous Si by HCl etching, and carbonization of phenolic resin. Also the electrochemical performances of nano porous Si/C composites as the anode were performed by constant current charge/discharge test, cyclic voltammetry and impedance tests in the electrolyte of $LiPF_6$ dissolved inorganic solvents (EC:DMC:EMC=1:1:1vol%). It is found that the coin cell using nano porous Si/C composite has the capacity of 2,006 mAh/g and the capacity retention ratio was 55.4% after 40 cycle.

• Prospectives of Industrial Chemistry
• /
• v.23 no.5
• /
• pp.12-20
• /
• 2020

최근 층상구조를 가진 전이금속 칼코겐 화합물이 새로운 고성능 리튬이온전지 음극소재로서 주목받고 있다. 층상구조 물질들의 고성능 전극 소재 활용에 있어 박리를 이용한 정확한 층의 개수 조절은 전기화학 반응성을 증가시키고, 전극 필름 내에서의 균일한 거동을 위해서 매우 중요하다. 볼 밀링 공정은 이차전지 전극 소재 제조에 있어서 주로 물질의 분쇄나 고상 화학반응을 유도하여 합금 형태의 전극 소재 개발에 보편적으로 사용되는 공정이나, 층상구조를 가진 전이금속 칼코겐 화합물에 적용하면 층상구조 물질에 고체윤활작용을 일으켜 박리가 촉진된다. 이러한 성질을 이용하여 다양한 종류의 전이금속 칼코겐 화합물(예: MoS₂, MoSe₂, NbSe₂)에 적절한 카본 매트릭스 물질과 복합화를 통해 새로운 전극 소재를 합성하고, 이를 통해 고성능 리튬이온전지 음극 소재를 제조하는 연구 동향에 대해 보고하고자 한다.