• 패션비즈니스
• /
• 제19권4호
• /
• pp.153-167
• /
• 2015

This paper proposes knit slacks patterns by lower body shape of middle-aged women. In addition, this paper aims to propose a design method for a prototype of nice knit slacks using the properties of knitwear. To select basic woven slack patterns which would be used in designing prototype of knit slacks for middle-aged women, two industrial slack patterns and two educational slack patterns were collected, and lab coats were prefabricated using muslin. Then, a shape test was performed by an evaluation board which consisted of eight experts who majored in Clothing Construction. Using blended yarn (1/17's) with 64% wool, 23% rayon and 13% nylon, 12G knit slacks in plain stitch were made. In terms of waist circumference of knit slacks, the front and the back were set to W/4+1+2(D) and W/4-1+2(D), respectively, with 1cm of difference using waist circumference (Omphalion) to cover the abdominal circumference. To make the front-back width of the side line even, the front waist circumference was increased by 1cm. The ease of hip circumference was set to 4cm in total with H/4+1+0.8 in front and H/4+1-0.8 in the back (0.8cm in difference). Crotch length was set by adding 3cm (width of waist belt) after deducting crotch height from waist height (Omphalion). The center front angle was shifted by 1cm while the center back angle was shifted from the center front to the side line by 5cm.

• 한국의류학회지
• /
• 제22권5호
• /
• pp.654-663
• /
• 1998

The purpose of this study is to improve the classic jacket pattern for Korean young men whose chest circumference is 91~94cm, status is 170~175 cm, and drop value between chest and waist circumference is 15. The study was carried out by the following procedures. 1. Through the comparative investigation on the conventional classic jacket patterns of Hyung-sook Lee's, 문화's in Japan, and SMA's and the clothing experiment, the characteristics of every three patterns were found. 2. According to correct the unsuitable point in Hyung-sook Lee's pattern which was found more suitable than other two patterns and to refer to the product size of the ready-made classic jackets for men, the new suitable classic jacket pattern was achieved. 3. The sensory evaluation for appearance and comfort and one to one comparison was applied to evaluate the new classic jacket pattern by comparing with the Hyung-sook Lee' s jacket pattern. From the result of the sensory evaluation and one to one comparison, it was found that the new classic jacket pattern was more suitable for appearance and comfort. 4. From the result of this study, the suitable surplus of men's classic jacket at present is about 23~24cm on the chest circumference, 31~32 cm on the waist circumference, 14~15 cm on the hip circumference, 13~14 cm on the upper arm circumference, and 14 cm on the wrist circumference and the ease is about 3.5 cm on the armhole circumference. This size is not the absolute size but it helps to make the surplus in any other clothes for Korean young men.

• 한국의류학회지
• /
• 제25권8호
• /
• pp.1524-1535
• /
• 2001

The purpose of this study was to establish a sizing system according to size and dimension whereby manufactured pants can be classified and develop men’s formal pants pattern based on the analysis of ready-made and educational pants pattern. The first, we surveyed the sizing and the basic pants patterns of the men’s ready-made wear companies, Secondly, through the survey data of the domestic men’ready-mad clothing industry, we proposed a new sizing system. Lastly, after compared three different types of ready-mad pants manufactured according to their patterns and an additional type of pants made after the educational pattern, the new men’s basic pants pattern were developed. The findings were as follows: 1. Survey of the domestic ready-mad garment industry showed that each company classified its own manufactured goods according to its own sizing system: moreover, they each used its own unique patterns which appeared to be resulted from a combination of two factors : the experience of a patterner and foreign know-how technology. 2. New sizing system was developed with 12 steps from size 74-88 to size 96-106 based on the high frequencies of the companies’3. New basic patterns for men’s formal pants were developed: Inseam length = 80cm, crotch line = H/4+4.6cm, pants ham = 23.5cm as basic lines and front waist girth =W/4+9.1cm as drafting line. 4. the superiority of the new basic patterns were been demonstrated by a high approval rate of the subjects who participated in testing.

• 한국의류학회지
• /
• 제27권3_4호
• /
• pp.429-440
• /
• 2003

The purpose of this study is to classify the types of men's shoulders through the criteria which represent the characteristic of men's shoulders. In addition, we introduce new bodice patterns depending on our classification. We have the fo11owing conclusions based on our sample size of 200 men's shoulders: 1. The result of factor analysis indicates that six factors are extracted and they consist of 62.3% of total variance. We then choose three factors as standard items for our classification of the shape of men's shoulders. 2. We divide the shape of shoulders into three categories: bent, slopeness, and thickness. Each category is divided into three subcategories. (a) Bent: If one's shoulders are bent forward or backward, then we call them front or back-bent type. Otherwise, they are called standard-bent type. (b) Slopeness: If one's shoulders have an easy or steep slope, then we call them easy or steep slope type. Or else, they are called standard slope type. (c) Thickness: If one's shoulders are thick or thin, then we call them thick or thin type. Otherwise, we call them standard thick type. 3. According to the frequency based on our data entries of 200 men's shoulders, we introduce five new types of men's shoulders. 76.5% of examined men's shoulders belong to one of these five types: (a) 8.0% of standard slope and back-bent type: (b) 9.5% of easy slope and standard-bent type; (c) 45.5% of standard slope and standard-bent type; (d) 5.5% of steep slope and standard-bent type; (e) 8.0% of standard slope and back-bent type. 4. The suitability of new basic bodice patterns based on the types of men's shoulders are demonstrated by the high approval rate of the subjects who participate in testing.

• 한국콘텐츠학회논문지
• /
• 제16권8호
• /
• pp.640-650
• /
• 2016

이 연구는 1990년대부터 2000년대 초반에 두드러지게 활동한 만화가 이정애와 유시진의 작품에 나타난 '망상형' 인물의 연애서사를 분석한다. 이들 인물의 특징은 대상에 대한 과도한 집착, 현실 논리의 거부, 광기 그리고 극단적인 이기심으로 설명된다. 이들은 사랑과 연애가 자기계발의 담론 안에 포섭되고 극적인 파토스를 감정의 낭비로 치부하는 21세기 한국사회뿐 아니라 창작물 속에서도 자취를 감추고 있는 인물 유형이다. 그럼에도 불구하고 세계의 질서를 거부하고 상대에 대한 사랑 자체에만 집중하는 망상형 인물들이 제시하는 이기심과 파국에 주목할 필요가 있다. 대중문화가 자극하는 멜로드라마의 감상성을 배반하고 '사랑'이라는 개념 자체를 재고하게 만들기 때문이다. 이정애는 기독교의 메시아 모티프를 활용해 망상형 인물과 연애서사가 집단화된 강박으로 진행되는 것을 보여주었다. 한편 유시진은 기억을 망각한 망상형 인물이 히스테리적으로 환상에 반응하고 결국 파국을 선택하는 서사를 제시한다. 이 두 서사는 멜로드라마의 연애서사가 삭제한 개인 욕망의 원형을 제시한다는 의의를 갖는다.

• 한국양식학회:학술대회논문집
• /
• 한국양식학회 2003년도 추계학술발표대회 논문요약집
• /
• pp.66-66
• /
• 2003

대구는 한대성 어종으로 크기가 1m에 달하는 대형 고급 어종이나 최근 자원량 감소로 인하여 생산량이 급격히 줄어들었다. 대구 자원 증대를 위한 방류 사업은 1981년부터 국립수산과학원 주도로 실시되어 오다가 현재는 수협과 경남도 등에서 수정란을 연안에 뿌리는 방식으로 추진되고 있다. 그러나 지금까지 노력에도 불구하고 방류를 통한 자원 증대 효과는 극히 미진한 것으로 알려져 있어 대구 차원의 실질적 증대를 위해서는 생존율 향상에 도움이 되는 종묘생산에 의한 치어의 방류가 절실히 요구된다. 본 연구에서는 대구의 종묘생산을 위한 생물학적 기초자료를 얻기 위하여 채란, 부화 및 자어사육 결과를 보고한다. 강원연안 대구의 채란은 1월 중순부터 3월 초순까지 가능하였으며, 산란기 암수 GSI는 암컷 33.5, 수컷 13.7이었다. 전장 80.4cm 암컷의 포란수는 363만 개였으며, 복부압박법으로 180만개의 알을 채란할 수 있었다. 채란된 알은 직경 1.08mm의 원형 점착란으로, 습식 인공수정 방법에 의한 수정률은 65%이 었다. 부화는 1시간 이상 세란 후 가두리에서 부화시키는 방법이 효과적이었으며, 수온 4$^{\circ}C$에서는 10일 후 배체형성 후 폐사하였으나, 7$^{\circ}C$에서는 수정 12일 후 65.0%가 부화하여 가장 양호하였다. 1$0^{\circ}C$에서는 수정 8일 후에 30%의 부화율을 보였으며, 13$^{\circ}C$와 16$^{\circ}C$에서는 각각 4일 및 2일 후 발생이 중지되고 폐사하였다. 부화자어는 전장 4.3mm였으며, 부화 45일째 9.3mm로 성장하였다.

• 한국의류학회지
• /
• 제15권3호
• /
• pp.309-320
• /
• 1991

The purpose of this study was to develope a pattern drafting method for various somatotype which contribute largely to increase the fitness and comfort of garments. This study had 8 subjects who were college girls who had prominent somatic characteristics. The study was carried out by the following procedures. 1. The 8 subjects who had prominent somatic characteristics were cheesed by photograph- ing. The somatotypes of 8 subjects were classified into Standard somatotype, Turning over somatotype, Bending somatotype and Turning over-Bending somatotype. 2. Under the criterion of the body surface development, the comparative investigation on the pattern and the sensory evaluation were accomplished in the flat pattern method and the draping pattern method. 3. The body surface development of them were made by the draping pattern method. 4. In the result of the comparative investigation and the sensory evaluation, it was found that the flat pattern had better appearance and comfort than the draping pattern, and the draping pattern included more somatic characteristics than the flat pattern. 5. On the basis of those result, the pattern drafting method according to the somatotype was indicated and it was examinated by the clothing experiment. 6. The sensory evaluation for appearance and comfort was applied to evaluate the new basic pattern for four somatotype by comparing it with the conventional basic pattern (Rim, won ja' 5). The result of the sensory evaluation, it was found that the new basic pattern was more suitable for each somatotype than the conventional basic pattern.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2009년도 학술발표회 초록집
• /
• pp.698-702
• /
• 2009

본 연구는 강원도 영서지방의 지방하천을 중심으로 수리특성 및 교각제원 등을 조사하여 기존 세굴심 산정식의 산정 값과 모형실험 산정 값을 비교 검토 하였으며, 또한 교각의 세굴에 영향을 주는 인자에 대하여 통계학적 방법인 민감도 분석을 하였다. 이에 따른 분석결과 기존 세굴심 산정식의 경우 전체 적으로 교각 크기가 커지면서 산정 값과 모형실험 산정 값간의 편차가 $1.09%{\sim}63.98%$ 를 보이고 있어, 강원도 하천의 경우 기존 세굴심 산정식을 적용하여 산정하기에는 적합하지 않은 것으로 판단되었으며, 기존 세굴심 산정식 중 교각크기만으로 형성된 산정식의 경우 세굴심산정이 간편하기는 하나, 수리특성을 충분히 반영하지 못한 산정식의 경우 민감도가 크게 떨어지는 것을 확인 할 수 있었다. 모형실험 산정 값과 세굴심에 대한 민감도 분석결과, 교각크기 64%, 수심 36% 순으로 세굴심 발생에 유의적인 영향을 미쳤으며, 모형실험의 세굴심 값을 토대로 회귀분석을 통하여 강원도 하천에 적합한 세굴심 산정식을 제안 하였다.

• 생약학회지
• /
• 제34권1호통권132호
• /
• pp.70-74
• /
• 2003

Cornis fructus has been traditionally used for treating allergy, asthma, hepatitis, and chronic nephritis. It major chemical constituents have been saponins, phenolic acids and loganin. The main aim of the present study was to examine the effect of methanol extract from Cornis fructus on melanogenesis. Cell were cultured in the presence of methanol extracts from Cornis fructus for 48 h, and there were estimated total melanin content as a final product and activity of tyrosinase, a key enzyme, in melanogenesis. Methanol extract from Cornis fructus increased the melanin content and tyrosinase activity in a dose-dependent manner. Particularly, it was observed that only methanol extract $200\;{\mu}g/ml$ stimulated the melanin secretion in B16/F10 melanoma cells by 152% at 48 h treatment and the activity of tyrosinase was increased by 261% in the presence of same concentration.

• 한국압력기기공학회 논문집
• /
• 제12권1호
• /
• pp.115-125
• /
• 2016

The prototype SFR has currently been under design by KAERI. The size of its major components is much larger than that of APR1400 and high temperature materials are applied for it. The increased size of components and those specific materials effect on material procurement, manufacturing process and fabrication facilities. The manufacturing methods are studied for Reactor Vessel/Guard Vessel, Control Rod Drive Mechanism, Heat Exchanger, Primary Pump, Reactor Vessel Internals, Steam Generator and In-Vessel Transfer Machine. The proper manufacturing methods are suggested for each component including side forging technology for ultra large forgings of Reactor Vessel to minimize the weld seams on which In-service Inspection should be conducted.