• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.36 no.3
• /
• pp.325-333
• /
• 2012

An experimental study was carried out to determine the correlation between the internal flow in a circular nozzle and elliptical nozzles with the external flow. The flow rate, spray angle and drop size were measured under various conditions of the injection pressure. Numerical simulations were attempted to investigate the internal flow structure in the elliptical nozzles, because the experimental study was limited in its measurements of flow velocity and pressure distributions in the relatively small orifice. In the case of the elliptical nozzles, the disintegration characteristics of the liquid jet were significantly different from those of the circular nozzle. Surface breakup was observed at the jet issued from the elliptical nozzles with injection pressure. This is due to the internal flow structure, which is reattached to the orifice wall at the minor axis plane of the elliptical nozzle, unlike that observed with the circular nozzle.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.9 no.4
• /
• pp.518-527
• /
• 1985

대류-대류의 복합 열전달 문제를 유한차분법을 사용하여 수치적으로 연구하였다. 아래로부터 가열되는 직사각형 공동 내에서의 자연 대류와 공동 위쪽의 외부 난류 경계층 유동이 복합된 경우의 열전당 현상을 고려하였다. 두개의 서로 다른 모우드의 대류가 온도 분포가 미리 알려져 있지 않은 얇은 수평평판에 의해 분리되어져 있다는 점이 본 논문의 특이점이다. 수치적 해석은 Reynolds 수와 Grashof 수 및 공동의 기하학적 종횡비의 매개 변수적 효과가 발견되도록 행하여 졌다. 외부 난류 경계층 유동의 강도에 따라 공동 내에서의 유동 형태가 변할 수 있음을 알았다. 즉 내부 부력 세포의 회전 방향은 외부 유동의 존재에 의해 특성적으로 정해지며 공동 내의 유동 세포의 수는 Grashof 수가 증가 할수록 많아진다.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.7 no.2
• /
• pp.15-22
• /
• 2003

Computational study using the 2-dimensional, compressible, Navier-Stokes equations is performed to predict the discharge coefficient of air flow through a film-cooling hole. In order to investigate the effect of internal/external flows on discharge coefficient, the present computational results which are obtained for three flow cases, only external flow, only internal flow, and no flow, are compared with experimental ones. It is found that the computational results predict the discharge coefficient of the film-cooling hole in a reasonable accuracy and the external crossflow reduces the discharge coefficient, while the internal crossflow increases the discharge coefficient in a range of momentum flux ratio $I_{c-jet}$ > 1 due to the total pressure loss and boundary layer effect.

• The Journal of the Acoustical Society of Korea
• /
• v.41 no.6
• /
• pp.698-704
• /
• 2022

In this paper, the radiated aerodynamic noise generated from sound sources of a nozzle inflow is quantitatively investigated and compared with experimental results of externally radiated noise. A high-resolution unsteady compressible Large Eddy Simulation (LES) technique is used to accurately predict the internal and external flow of three types of nozzle shape. Through using the vortex sound source for sound sources, the geometry of nozzle neck is identified as most significant aerodynamic noise sources. For validation of quantitative analysis, the vortex sound source intensity of internal nozzle flow is compared with results of external radiated noise of calculation and experiment.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.38 no.1
• /
• pp.64-72
• /
• 2010

Due to the interaction between main oxidizer flow and the wall injected flow resulting from the regression process, a specific time characteristics identified in the frequency spectrum of streamwise velocity is generated in the hybrid rocket motor. In order to understand the response of the turbulent flow to two different types of external momentum forcing, LES analysis was conducted without considering the combustion. It turns out that both concentrated and distributed forcings do not lead to the disastrous resonance phenomenon. Energy contents are enhanced due to the added momentum but the peak frequency was not modified in the turbulent flow near the end of the rocket motor. Natural frequency of the flow system should be taken into account to further pursue the instability issue by using external forcing.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.9 no.4
• /
• pp.194-200
• /
• 1997

A two-dimensional shallow-water flow around a cavity driven by a sinusoidally oscillating external flow was studied numerically. A container model of "T" shape was constructed in the numerical computation for comparison with the experimental observation. The numerical computation shows that the aspect ratio of the cavity is not much affecting the overall flow pattern, and for the aspect ratio 2, the deep region of the cavity has a stagnant flow motion. At larger Reynolds number, the flow field is characterized by many small vortices which are not present in the flow visualization. The flow pattern in the external region is in good agreement with the experimentally recorded particle trajectories. It turns out that two large coherent vortices situated in the exterior region of the cavity are responsible for clockwise and counterclockwise drift motions, in large scale, of particles.particles.

• Proceeding of EDISON Challenge
• /
• 2015.03a
• /
• pp.612-617
• /
• 2015

초음속 흡입구는 고속 비행에서 발생하는 충격파를 이용하여 제트엔진 내부에 유입되는 공기를 압축시키는 구조로써 주로 램제트와 스크램제트 엔진에 적용되어 연구개발이 진행되어 왔으며 현재는 미사일의 추진체 개발에도 응용되고 있다. 초음속 영역에서의 흡입구는 cone 모양의 스파이크 구조를 통해 경사충격파가 생성되어 외부에서의 공기압축을 먼저 거치게 된다. 본 연구에서는 EDISON CFD를 이용하여 외부압축 초음속 흡입구 주위의 공기유동을 해석하고 Cubbison, R.W.의 풍동실험 결과와 비교 분석하였다. 초음속 흡입구 주위의 유동을 2D 축대칭 압축성 유동으로 가정하고 EDISON CFD의 2D_Comp_P 솔버를 사용하여 수치해석을 수행하였다.

• The Korean Journal of Rheology
• /
• v.6 no.2
• /
• pp.129-138
• /
• 1994

공압출되는 sheet die에서 고분자 물질의 비등온 유동유동을 수치모사하였다. 유변학 적 식으로 power-law model을 사용하였고, 격자생성법을 이용한 유한차분법을 사용하였다. 수치계산을 통해 수축채널에서의 온도 분포를 구해보고 점도가 채널에서의 온도 분포를 구 해 보고 점도가 채널에서의 압력강하 및 신장속도에 미치는 영향을 알아보았다. 압력강하는 외부 유체의 점도 및 heat dissipation의 영향을 크게 받았다. 신장속도는 외부 유체의 점도 가 증가함에 따라 커진 반면 내부 유체의 점도가 증가함에 따라 커진반면, 내부 유체의 점 도증가에 따라 감소하였고, heat dissipation에 의해 증가하였다.

• Transactions of the KSME C: Technology and Education
• /
• v.3 no.1
• /
• pp.45-53
• /
• 2015

The fact that gas hydrate and/or paraffin wax is frequently plugged in offshore pipeline has been become very significant for offshore piepline flow assurance. An active electrical heating along pipeline has adapted in resolving flow assurance problem like as gas hydrate and wax plugging. This study represents a novel internal-swirled heater which was designed and fabricated for more effective heating and thermal mixing through pipeline. The internal-swirled heater suggested in this study shows higher thermal mixing performances than the conventional external-traced heater.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1997.05a
• /
• pp.575-580
• /
• 1997

반구형 간극에서의 비등시 이상 유체의 유동 가시화 실험을 수행하였다. 가시화를 위해 투명한 유리로 제작한 외부 용기는 내부의 가열 용기와 1mm 간격을 이루도록 하였으나 외부 용기가 완전한 반구 형태를 이루지 못하여 간극의 크기가 균일하지 못하였다. 열속이 높아짐에 따라 간극이 좁은 부분에서는 밖으로 빠져 나오려는 증기와 상부의 물이 역류유동제한 현상을 일으켜 물이 공급되지 못하였고 간극이 큰 부분에서는 물이 다수의 유로를 형성하며 증기와 분리되어 간극 내부로 공급되었다. CCFL 을 일으켜 물이 공급되지 못한 부분에서는 히터 표면이 건조되어 국부적인 CHF(Critical Heat Flux)가 발생하였다.