• 전기의세계
• /
• v.12
• /
• pp.30-34
• /
• 1963

비선형자기철심을 사용한 inductance를 그 비선형영역까지 동작하게 할때와 직렬형가포화 reactor에 R-C부하를 직렬로 연결하여 동작시킬 때 어떠한 동작범위에서는 회로의 전류진폭이 불안정한 경우가 있다. 특히 직렬형가포화 reactor에 R-C부하를 연결한 경우는 J.T.Salihi씨 및 H.C.Bourne씨에 의하여 그 동작현상이 설명되었다. 그러나 안정조건은 충분한것이 아니라고 생각되며 이와같은 R-L-C 직렬회로는 정량적으로 해석하는데 수학적인 난점이 있어서 곤란하지만 정성적인 방법 즉 근사계산에 의하여 안정성문제와 그 회로동작상태 등을 고찰할 수 있다. 본 고는 이러한 안정조건을 계산하여 제시코져 한다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.37 no.11
• /
• pp.1055-1065
• /
• 2009

In this study, stability analysis of boundary layers on airfoils is performed by using parabolized stability equations(PSE). Boundary layer edge conditions are obtained by compressible inviscid flow calculations. Mean velocity and temperature profiles of the laminar boundary layer are obtained by solving compressible boundary layer equations in generalized curvilinear coordinates with fourth order accuracy in the wall normal direction. Laminar mean flow profiles are used as input data for PSE to investigate growth rates of disturbances and stability characteristics. For the cases of boundary layer on NACA0012 and HSNLF(1)-0213 airfoils at Mach number 0.5, growth rates with respect to disturbance frequencies and profiles of disturbance amplitude are investigated. The effect of angle of attack on stability characteristics are examined at both upper and lower surfaces. The neutral stability curves, effect of Mach number and effect of airfoil section shapes are also analyzed.

• Journal of the Korea Convergence Society
• /
• v.9 no.8
• /
• pp.171-177
• /
• 2018

In 3D printing technologies, many parameters should be optimized for obtaining a part with higher quality. FDM (fused deposition modeling) printer has also diverse parameters to be optimized. Among them, it can be said that nozzle temperature and moving speed of nozzle are fundamental parameters. Thus, it should be preceded to know the optimal combination of the two parameters in the use of FDM 3D printer. In this paper, a new method is proposed to estimate the range of the stable combinations of the two parameters, based on the single line quality. The proposed method was verified by comparing the results between single line printing and multi-layered single line printing. Based on the comparison, it can be said that the proposed method is very meaningful in that it has a simple test approach and can be easily implemented. In addition, it is very helpful to provide the basic data for the optimization of process parameters.

• Journal of the Korean GEO-environmental Society
• /
• v.24 no.5
• /
• pp.5-12
• /
• 2023

Recently, due to urban development and expansion, construction plans have been increasing adjacent to existing tunnel structures such as subways, roads, and large pipelines. Structural plans adjacent to existing tunnels have different effects on tunnel stability depending on the construction method, degree of proximity, and location of new structures. In particular, the pressure water tunnel shows a very large difference from other road tunnels and railway tunnels in geotechnical characteristics and operation characteristics. Therefore, it is necessary to review the safety zone due to adjacent construction in consideration of the geotechnical characteristics of the water tunnel and the new sturure construction method. In this study, the existing tunnel safety zone standards were investigated. A stability evaluation performed numerical analysis considering the deterioration of concrete lining in operation and the characteristics of water tunnel. In addition, the impact of vibration caused by pile construction and blasting excavation of new structures was reviewed. Based on this, a pressure water tunnel safety zone was proposed in consideration of adjacent construction.

• Journal of the Korea Safety Management & Science
• /
• v.13 no.3
• /
• pp.37-43
• /
• 2011

본 연구에서는 실린더 형 쉘 구조물의 구조적 안정성에 대하여 해석 하였다. 임계하중은 하중을 점차적으로 증가 하여 구조물이 파괴가 발생 할 때의 상태에서 가장 작은 하중을 의미한다. 셀 구조의 안정성을 임계하중의 크기로 기초를 두고 해석 하였다. 실린더 형 쉘의 차분해석은 일차적 원통형 판구조와 같으므로 최근에 많은 연구의 대상이 되어왔다. 차분법은 복잡한 구조물에서도 물론, 다양한 경계조건을 포함하는 문제에 이르기까지 효과적인 수치방법이다. 본 연구에서는 기본 쉘의 지배방정식을 유도하고 차분화 하여 직접적으로 접근하였다. 등분포 하중의 내압을 받고 있는 갇힌 실린더 형 쉘의 처짐 및 응력을 해석 하였다. 수치해석 결과를 해석해와 비교 검토하였으며 안정성에 대하여 임계 하중강도의 범위를 산출하였다.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2010.04a
• /
• pp.6-9
• /
• 2010

본 논문에서는 최소 중량을 갖는 PPWS용 소켓의 기하형상을 결정하기 위하여 소켓의 경사각, 스트랜드의 강도 및 스트랜드의 직경을 주요 설계변수로 결정하고 각 설계 경우에 대한 매개변수해석을 수행하였다. 소켓의 경사각은 5도에서 13도까지를 범위로 하였고 스트랜드의 강도는 1860MPa급, 1960MPa급 및 2100MPa급의 고강도 강선을 적용한 경우를 고려하였으며, 스트랜드의 직경은 91, 127, 169 및 217개의 강선을 적용한 경우를 대상으로 하였다. 또한, 매개변수해석에서 도출된 기하형상을 갖는 소켓의 안정성을 검토하기 위하여 유한요소해석을 이용하여 소켓을 해석하고 스트랜드의 허용인장력 작용시 소켓의 안정성을 검토하였다. 해석 결과, 소켓의 중량을 최소화하는 내부 경사각은 스트랜드의 직경에 큰 영향을 받음을 알 수 있었으며, 매개변수해석으로부터 설계된 소켓은 스트랜드의 허용인장력 작용시 충분한 안정성을 확보하고 있음을 알 수 있었다.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.34 no.1
• /
• pp.9-14
• /
• 2008

Formation of oil-in-water nano-emulsions has been studied in oil/hydrogenated lecithin/water systems by two shear different instrument. The influence of surfactant concentration on nano-emulsion droplet size and stability has been studied. Droplet size was determined by dynamic light scattering, and nano-emulsion stability was evaluated by measuring the variation of droplet size as a function of time. The results obtained showed that the breakdown process of nano-emulsions studied could be attributed to Ostwald ripening. An increase of nano-emulsion instability with increase in surfactant concentration was found in the droplet size in the range of 100~200nm, however, an decrease of instability was found in the droplet size in the range of 300~400nm.

• Journal of the Korea Society of Computer and Information
• /
• v.26 no.4
• /
• pp.143-147
• /
• 2021

The purpose of this study is to investigate how the application of a Thorax belt affects the stability of the spine in subjects with a wide infra-sternal angle. A total of 15 subject with wide infra-sternal angle participated in the experiment. Active Double leg lowering and active one-leg raising were performed with or without a thorax belt. Two spinal stability tests (active double lowering and active one-leg raising) performed with or without thorax belt application showed significant differences between each condition. Based on the results of present study, the application of a thorax belt is considered to be an effective therapeutic tool that can stabilize the spine to subjects with abnormally increased chest cage and spinal or trunk instability.

• Applied Biological Chemistry
• /
• v.38 no.3
• /
• pp.254-258
• /
• 1995

Various artificial casein micelle systems were prepared from dephosphorylated whole casein, ${\beta}$- or ${\kappa}$-casein and their stabilities towards ethanol were assessed. Ethanol stability was lower in the micelle systems with dephesphorylated whole casein as compared to the artificial micelles prepared from native whole casein, and the stability decreased with the extent of dephosphorylation. The casein micelles with partially dephosphorylated ${\kappa}$-casein had a lower ethanol stability than those with native ${\kappa}$-casein. Ethanol stability of the micelle system with dephosphorylated ${\beta}$-casein decreased as the degree of dephosphorylation increased. Progressive dephosphorylation of caseins in skim milk system resulted in a decrease of the stability towards ethanol. The decrease was less than that in the system with dephosphorylated individual caseins. Increase in pH of the artificial casein micelle systems in the range of $6.3{\sim}7.2$ led to an increased ethanol stability manifesting that the presence of serine phosphates contributes significantly to the stability towards ethanol.

• The Journal of Engineering Geology
• /
• v.12 no.3
• /
• pp.285-294
• /
• 2002

The origin of nitrate in confined groundwater was studied using oxygen ($\delta$180), hydrogen ($\delta$D), and nitrogen ($\delta$15N) stable isotopes, along with chemical data of NO3-N. We analyzed groundwaters from more than sixty manufactories producing natural mineral waters around the country During the period of 1998-2001, an average value of nitrate was fair]y low (0.95 mg/$\ell$), however, groundwaters from six sites showed more than 2 mg/$\ell$ of nitrate. The stable isotope data of the groundwaters are -8.3~-11 $\textperthousand$ $\delta$8O, -60~-75 $\textperthousand$ $\delta$D, which lies in an average range of the groundwaters. The nitrogen isotope data with -11.8~-5.1$\textperthousand$ $\delta$15N suggest that manure, organic nitrate, and fertilizers can not be the origin of nitrate in the goundwaters.