• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2014.11a
• /
• pp.109-110
• /
• 2014

The buildings constructed with steel structure is coated with certified fire resistive material to resist from fire. Coating materials lose their initial performances as time passes, so they need some maintenance. This study is covers standardization of the methods for assessing the durability of SFRM. In Korea, more than 90 percent of SFRM are used indoors. So This study is to decide proper test method through investigation and examination of effect factor to performance of fire-resistant structure and applicable test method.

• Magazine of the Korea Concrete Institute
• /
• v.4 no.2
• /
• pp.83-92
• /
• 1992

본 연구의 목적은 현장에서 구입 가능한 저품질의 재료를 사용한 일련의 실험을 통하여 28일 압축강도와 물\ulcorner시멘트비와 관계를 유출함으로써 고강도 콘크리트의 배합설계식을 얻기 위한 것이다. 목표슬럼프는 고층건물에서의 시공성을 고려하여 15$\pm$2cm로 하였으며 혼화제로는 고성능감수제를 사용하였다. 실험결과로부터 고강도콘크리트의 응력-변형도 특성을 비롯하여 탄성계수, 포아송비, 단위중량 등 고강도 콘크리트의 일반적인 재료성질을 얻었으며 본 연구에서 제안한 고강도콘크리트의 배합설계식은 국내현장조건을 고려한 실용식으로 고강도콘크리트으 설계 및 시공을 위한 기초자료로 사용 가능하다고 판단된다.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2004.11a
• /
• pp.813-816
• /
• 2004

This study was performed to investigate bonding performance of epoxy resins for repairing of cracks in concrete, as a part of project to establish quality control standard for epoxy resins. In the slant shear strength test for hard and soft type epoxy, hard type was higher about 3 times than soft one. From the results, it is thought that hard type is suitable for load carrying. Injection of epoxy resin in the notch made flexural strength increase about $47\%$ over the specimen that epoxy resin is not injected. There were no differences in bonding performances with viscosity. Application of epoxy resin on the wet concrete surface made slant shear strength decrease about $46\%$, but similar performance to the case of application on the dry surface appeared by using epoxy resin for wet condition.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2017.11a
• /
• pp.219-220
• /
• 2017

Current domestic waterproofing market in Korea mainly uses single-ply waterproofing materials comprised of coatings or waterproof sheets and two or more-ply composite waterproofing methods. In order to evaluate these types of composite waterproofing systems, a new test equipment and method that incorporates various deterioration conditions (joint displacement, chemical exposure, water pressure etc) was developed. In a comparison testing, the results showed that flexible type materials have higher response performance towards joint displacement than the hardened material. Furthermore, the importance of securing the stability of the waterproofing method in the vulnerable over-lap joint areas of waterproofing sheets is emphasized.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2011.05a
• /
• pp.197-199
• /
• 2011

To utilize the Top-Down construction method, it is required to analyse building area, floors, and soil conditions to choose the three basic elements of retaining wall, base column, and floor structure. The purpose of this research is to compare the methods of Top-Down with other construction methods. The research method is to analyse the project conditions of Top-Down project cases. The aim is to develop a method of selecting alternatives, considering construction characteristics, work schedule, supporting methods, foundation types.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2013.05a
• /
• pp.29-30
• /
• 2013

Steel corrosion is the most serious problem in RC structures. Even though patch repair method is normally applied in repair system, the effectiveness is not enough. Cathodic protection in active repair method to deteriorated RC structures. FEM model was developed to simulate the optimized cathodic protection condition. Iro oxidation, hydrogen evolution and oxygen reduction were considered to expect current distribution. Moisture content in concrete which can affect the electrolyte conductivity was used as initial condition.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2011.05a
• /
• pp.99-101
• /
• 2011

In order to have pumping technology for high speed construction of tall building, study for quantitative evaluation of flow characteristics and pumpability should be conducted. So, this study evaluate the characteristics among the inner pipe pressure, fresh concrete properties and separated mortar through the continuous pumping test. Then it consider of relations between rheological properties and pumpability. In the result of test, it found that there are high interrelationship between the rheological characteristics which represented plastic viscosity and pressure lose by pipe length.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2013.05a
• /
• pp.332-333
• /
• 2013

This research utilizes the modified sulfur having the low melting point which 65℃ is tries to study the strength property of the mortar according to the cure method of the modified sulfur mortar. And we try to use as basic data for investigating the curing condition of the light panel optimum utilizing the modified sulfur. We experimented by five kinds; 20℃ water curing method and 20, 40, 60, 80(℃) air dry curing method. In 3 day curing, the compressive strength was improved caused by high curing temperature. But the compressive strength was degraded caused by enhanced temperature in 7day curing and 28day curing. Therefore, the curing temperature of the modified sulfur mortar is determined that it comes 20 time case curing and the water curing is the most recommendable.

• 월간 기계설비
• /
• s.223
• /
• pp.75-78
• /
• 2009

전통적으로 주요 EPC(설계, 구매, 시공) 공사는 최초의 엔지니어링 작업(FEED : Front End Engineering Design)을 한 후, 경쟁입찰을 하여 총액계약(Lamp Sum)으로 공사를 수행했다. 최근에 EPC시공자의 위험부담을 줄이는 한편, 발주자는 경쟁적인 시공자를 확보할 수 있는 기회를 확대하면서 협상기간을 단축하교 조기착공을 위해, Lump Sum 가격을 늦게 결정하는 방법을 고려한다. CLST(Converted Lump Sum Turnkey)계약방식은 최초의 엔지니어링 작업을 한 후 경쟁입찰을 통해 1차 계약을 맺고(설계 및 특별 자재 공급에 대한) 공사를 수행하다 설계가 충분히 진행되고 핵심자재에 대한 견적이 입수되어 발주 가능한 시점 및 하도급사를 선정할 준비가 된 시점에서 1차 계약을 변경해 2차 계약을 맺는다. 2차 계약 시 1차 시 맺은 계약조건(직접공사비, 일반관리비 및 이윤, 최대한도 금액이 포함됨)을 기준으로 하되, 발주자가 Open Book 형식으로 공사비를 평가하고 재협상하여 Lump Sum 금액으로 전환해 합의한다. 이후 Lump Sum Tumkey 계약과 동일한 형식으로 공사를 수행한다.

• Journal of Welding and Joining
• /
• v.2 no.2
• /
• pp.13-21
• /
• 1984

Chemical tanker의 Crago tank는 화학제품에 대한 내식성, 내산성 등이 요구되는 재료로서 스테인레스강이나, 스테인레스 클래드강이 주로 사용되고 있다. 이러한 스테인레스강을 사용한다 하더라도 사용시 국부적인 결함 및 부식의 문제점이 발생되고 있다. 특히 스테인레스 클래드강을 사용했을 경우 부식 및 기타 요인에 의해 결함이 발생했을 때, 클래드재(앞대기재)의 두께가 약 2.5mm 정도에 불과하므로 보수작업이 어려우며, 보수작업에 의한 산화피막의 파괴는 부식을 촉진시킨다. 이들 결함 및 부식 발생의 여러요인 중 특히 용접 시공상의 문제점이 가장 크게 영향을 미친다. 또한 용접 시공상의 문제점 중 스팻터를 제거하기 위해서는 많은 공수가 소모될 뿐 아니라 품질면에서도 나쁜 영향을 주고 있다. 본 고에서는 스팻터 생성기구의 검토와 스팻터가 모제에 미치는 영향을 다루고자 한다. 또한 용접조건 및 용접재료의 변화에 의한 스팻터 생성량 변화, 입도에 따른 비행거리 등을 검토하는데 목적을 두었다.