• Journal of the Korea Society of Computer and Information
• /
• v.12 no.1 s.45
• /
• pp.67-72
• /
• 2007

In this paper, we present a construction method using perspective model which allows for the representation of the motion of a planar surface under perspective projection. The motion parameters are obtained by minimizing a disparity measure between the region in the current frame and the mapped region in the previous frame. The frames are constructed with dynamic panoramic image using a fixed reference or a time varying reference. By experiment, panoramic image proposed in this paper represents contents more efficiently than static image or video, and has a high volume reduction ratio.

• Proceedings of the Korean Information Science Society Conference
• /
• 2000.10c
• /
• pp.50-52
• /
• 2000

페이징 기법의 효율성은 어떠한 페이지 교체 기법을 쓰느냐에 따라 결정된다. LRU 기법은 작업 부하의 변화에 잘 적응하여 많은 경우 좋은 성능을 보인다. 그러나 참조의 횟수에 대한 정보를 이용하지 못한다. LFU 기법은 지역성을 가지는 참조 패턴이 발견되면 좋은 성능을 발휘한다. 그러나 작업 부하가 변하는 경우 이에 적응하지 못한다. 여러 응용에 대해 참조 패턴을 분석하여 보면 참조되는 페이지는 최근성과 참조 횟수에 의해 가치가 결정되며, 따라서 LRU나 LFU 기법 한 가지만으로 페이지 교체 정책을 최적화 시킬 수 없다. 본 논문에서는 LRU 기법과 LFU 기법을 결합한 새로운 교체 기법을 제안한다. 이 교체 기법에서는 LRU 리스트와 LFU 리스트를 결합하여 사용함으로써 참조 시간뿐만 아니라 참조 횟수를 이용하여 페이지들을 교체한다. 트레이스 기반 모의 실험에서는 제안 기법의 순수 LRU 기법보다 나은 성능을 보일 때가 있다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.05a
• /
• pp.155-156
• /
• 2010

`Panoramic image' is called generally 'mosaic image', to create a new image by matching the number of relevant images. In this paper, we are entering data through the camera. Therefore, perspective model was used for recognition of camera parameters, minimizing the discrepancies by proposing measure of discrepancy between the frames. In addition, how to create panoramic images is proposed by fixed reference and time-varying reference in order to create panoramic images.

• Korean Journal of Materials Research
• /
• v.10 no.8
• /
• pp.540-544
• /
• 2000

The effect of atmospheric annearling on the densification and electrical poperty of the Ca-doped $YCrO_3$were investigated. In order to study the densification and elecrical properties of $Y_{0.7}Ca_{0.3}CrO3$ the sample sintered at $1700^{\circ}C$ for 12hrs were subsequently annealed at $1400^{\circ}C$ under various atmospheres($O_2$, Air, $N_2$)as a function of time. The density of $Y_{0.7}Ca_{0.3}CrO3$ was $4.5/cm^3$ before annealing. Under the $N_2$ annealingm the bulk density of $Y_{0.7}Ca_{0.3}CrO3$ was increased to $4.9g/cm^3$ at 24hrs and then remained unchanged at 48hrs. When $Y_{0.7}Ca_{0.3}CrO3$nwas annealing at $1400^{\circ}C$ for 12hrs and 24hrs under $O_2$ activation energies were about 0.16eV at 12hrs and 24hrs, and showed 0.167eV below 400K, and 0.24eV over 400K at 48hrs.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.43 no.6 s.312
• /
• pp.11-19
• /
• 2006

The recent video coding standard H.264 employs the rate-distortion optimization (RDO) method for choosing the best coding mode; however, it causes a large amount of encoding time. Thus, in order to reduce the encoding time, we need a fast mode decision algorithm. In this paper, we propose a fast inter mode decision algorithm considering quantization parameter (QP). The occurrence of best modes depends on QP. In order to reflect these characteristics, we consider the coded block pattern (CBP) which has 0 value when all quantized discrete cosine transform (DCT) coefficients are zero. We also use the early SKIP mode decision and early $16{\times}16$ mode decision methods. By computer simulations, we have verified that the proposed algorithm requires less encoding time than the fast inter mode decision method of the H.264 reference software for the Baseline and Main profiles by 19.6% and 18.8%, respectively.

• The Journal of the Acoustical Society of Korea
• /
• v.26 no.3
• /
• pp.129-135
• /
• 2007

In this paper. we propose a prewhitening method for the km reverberation to enhance the target signal. The proposed algorithm uses the dechirping method which inversely compensates the frequency chirp rate of LFM and transforms the LFM reverberation to have stationary frequency property in each data block. Also, using the left and right adjacent beam signals as reference signals. we model frequency response of each data block by AR coefficients. From these coefficients, we implement inverse filter and prewhiten the LFM reverberation of the center beam efficiently.

• Journal of KIISE:Computing Practices and Letters
• /
• v.14 no.8
• /
• pp.788-792
• /
• 2008

In this paper, we propose a method that uses the constrained inter-view prediction for multi-view video coding. In the multi-view video, there exists occluded area because of the locations and angles of cameras. This increases the computational complexity, as it still uses both reference pictures for predicting the area which is not shown in the current frame. In this paper, we propose a method that does not use the inter-view prediction in cases of the occluded macroblocks. Experimental results show that benefits about 4% can be achieved compared with the conventional approaches.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.29 no.5
• /
• pp.543-550
• /
• 2011

The gravity anomaly is a basic geophysical data applied in various fields such as geophysics, geodesy and national defense. In general, the gravity anomaly is used through a interpolation process based on the constructed database. The gravity variation, however, is appeared in various shapes depending on the topography and the density of the underground structures. Therefore, the interpolation could lead to a large differences if the gravity fields do not satisfy the assumptions on the signal behavior like linear or a certain degree polynomials. Furthermore, the interpolation does not reflect the physical characteristics of the gravity such as the harmonic condition. In this study, the gravity modeling using the plane Fourier series and radial basis functions are performed to overcome the problems in the usual interpolation. The results of the modeling is analyzed for the case of the gravity referenced navigation focused on the signal characteristics. Based on the study, it was found that the results from modeling are not much different to that from the interpolation in a smoothly varied area. In case of the highly varied area, however, a large differences are appeared among the three methods. Especially, the Fourier series shows the most smooth variations in the modeled gravity values while the highest variations appeared in the interpolation. Applying to the gravity referenced navigation, it was found that the modeling is more effective in calculation cost. It is considered that the results from this study provides a basis on effective modeling of the gravity fields in terms of the signal characteristics and resolution for various application fields.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.7 s.337
• /
• pp.35-40
• /
• 2005

This paper proposes a fractional-N phase-locked loop (PLL) frequency synthesizer using the 3rd order ${\Delta}{\sum}$ modulator for 900MHz medium speed wireless link. The LC voltage-controlled oscillator (VCO) is used for the good phase noise property. To reduce the lock-in time, a charge pump has been developed to control the pumping current according to the frequency steps and the reference frequency is increased up to 3MHz. A 36/37 fractional-N divider is used to increase the reference frequency of the phase frequency detector (PFD) and to reduce the minimum frequency step simultaneously. A 3rd order ${\Delta}{\sum}$ modulator has been developed to reduce the fractional spur VCO, Divider by 8 Prescaler, PFD and Charge pump have been developed with 0.25um CMOS, and the fractional-N divider and the third order ${\Delta}{\sum}$ modulator have been designed with the VHDL code, and they are implemented through the FPGA board of the Xilinx Spartan2E. The measured results show that the output power of the PLL is about -lldBm and the phase noise is -77.75dBc/Hz at 100kHz offset frequency. The minimum frequency step and the maximum lock-in time are 10kHz and around 800us for the maximum frequency change of 10MHz, respectively.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.33B no.11
• /
• pp.140-149
• /
• 1996

Cursive characters are written on an economical principle to reduce the motion of a pen in the limit of distinction between characters. That is, the pen is not lifted up to move for writing a next stroke, the pen is not moved at all, or connected two strokes chance their shapes to a similar and simple shape which is easy to be written. For these reasons, strokes and korean alphabets are not only easy to be changed, but also difficult to be splitted. In this paper, we propose a curvature stroke modeling method for splitting and matching by using a structural primitive. A curvature stroke is defined as a substroke which does not change its curvanture. Input strokes handwritten in a cursive style are splitted into a sequence of curvature strokes by segmenting the points which change the direction of rotation, which occur a sudden change of direction, and which occur an excessive rotation Each reference of korean alphabets is handwritten in a printed style and is saved as a sequence of curvature strikes which is generated by splitting process. And merging process is used to generate various sequences of curvature strikes for matching. Here, it is also considered that imaginary strokes can be written or omitted. By using a curvature stroke as a unit of recognition, redundant splitting points in input characters are effectively reduced and exact matching is possible by generating a reference curvature stroke, which consists of the parts of adjacent two korean alphasbets, even when the connecting points between korean alphabets are not splitted. The results showed 83.6% as recognition rate of the first candidate and 0.99sec./character (CPU clock:66MHz) as processing time.