• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.6 no.2
• /
• pp.20-27
• /
• 2010

In order to prevent the corrosion of component contacted primary water designed alloy 600 material in the nuclear power plant. But the primary water stress corrosion cracking(PWSCC) of alloy 600 and weld area occurs continuously due to the residual stress. The leakage accident resulted from PWSCC in the drain nozzle of the steam generator of domestic power plants. Heater sleeves of the pressurizer are welded with alloy 600 weld material and therefore exposed to the primary water environment. PWSCC occurred in heater sleeve material and weld area of many foreign power plants. The current issue of domestic nuclear power plants are consequently concentrated to PWSCC of similar material. In order to improve the detection and the sizing of the PWSCC in the welding sleeve of the pressurizer, the automatic UT system and multi-directions probe sets have been developed. The experimental studies have been performed using the mock-up block containing artificial reflectors(ID connected EDM notch) and semi-artificial cracks made from thermal fatigue. The automatic UT System is applied in the detection and the length sizing of the ID/OD on the tube and the J-groove weld area of the artificial reflectors and results of the detection and the sizing are compared respectively. Also, the developed automatic UT system is successfully accomplished to inspect the heater sleeve and the J-groove weld area on the pressurizer for the detection of PWSCC.

• The Research Journal of the Costume Culture
• /
• v.23 no.1
• /
• pp.117-125
• /
• 2015

The purpose of this study is to evaluate the differences of body compensation image on variations in the shoulder height and width of power shoulder raglan sleeve jacket. Nine samples were examined: 3 variations of the shoulder height and 3 variations of the shoulder width. The data was evaluated by 123 fashion design majors. The results were as follows; as a result of analyzing the body compensation image according to changes in the shoulder height and width of power shoulder raglan sleeve jacket, five factors were selected; the shoulder compensation factor, the bust compensation factor, the waist compensation factor, the arm compensation factor and the neck compensation factor. Among these factors, the shoulder compensation factor is the most important factor. Examining the major effect of the body compensation image based on changes in the shoulder height and width of power shoulder raglan sleeve jacket, it had an independent influence on factors about waist, neck, shoulder and arm compensation except a factor about bust compensation, had an influence on interacting effect of factors about shoulder, bust, waist, arm compensation, and it had no influence on interacting effect of a factor about neck compensation. This shows that the shoulder height has larger effect on neck compensation image than the shoulder width in power shoulder raglan sleeve jacket.

• Journal of the Korean Society of Costume
• /
• v.60 no.10
• /
• pp.163-179
• /
• 2010

False sleeves are 'the sleeves that are attached to clothes but exist just as a part without any function to put arms in them.' They are different from sleeves to put arms in them and are to follow the trend or a way of wearing clothes. They are mostly found in medieval Europe's decorative sleeves named 'Hanging sleeves', but they are also found in Eastern region, too. They are found in sleeves that attached women's headgear in East and Middle Asia, and also in high-class male caftan in Ottoman Turk in the 16th and 17th century. False sleeves can be divided into two kinds by shapes. The first ones are the decorative sleeves of which trunk-shaped sleeves hang around the whole or part of the arm hole but have no function to put arms in them; this is called as 'sleeve-shaped False sleeves'. These sleeves are found in women's headgear in medieval Europe, Ottoman Turk, and East and Middle Asia. False sleeves in Europe and Ottoman Turk played a role in showing wealth and power while those in East and Middle Asia had a great role in highlighting the costume's decorative effect. The second ones are the sleeves hanging down from the arms by attaching long cloth to the arm hole, in design; these are named as 'cape-shaped False sleeves.' This style is found only in medieval Europe, and presumably, these cape-shaped false sleeves may have played a role in boasting of one's wealth and power.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.1
• /
• pp.7-13
• /
• 2007

In this paper, we have designed and fabricated a small size wide-band monopole antenna which can integrate the frequency of previous business mobile communication system by adding 4 PCS of post type parasitic element on top-loaded sleeve monopole antenna. We have observed the properties of return loss upon a parameter change of element, and we also examined radiation properties in the band of PCS, W-CDMA, WiBro, W-LAN and S-DMB in order to make sure the suggested antenna's wide-band properties. We have found that the proposed antenna has omni-direction in horizontal plane and figure eight-direction in vertical plane, and we could have good return loss($Return\;loss{\leq}-10\;dB$) and $1.14{\sim}3.66\;dBi$ gain in $1.67{\sim}3.55\;GHz$ of frequency range($B/W{\fallingdotsep}72%$).

• Journal of the Korea Fashion and Costume Design Association
• /
• v.20 no.4
• /
• pp.95-104
• /
• 2018

This study classified the figurative features of the raglan sleeves presented in the Spring and Summer Collections and Fall and Winter Collections abroad in 2010 and 2018 and analyzed the production methods and patterns of the classified raglan sleeves. The analysis results are described below. The raglan sleeves in the latest fashion trends were classified into Type H, Type A, Type O and Type Y per shape. The production features of raglan sleeves in the latest fashion trends included the cutting lines in various shapes, a flounce that made shoulders look wider, and decorations such as gathers, studs, punching, slits, pleats and tucks. The raglan sleeve design was classified into Yoke Raglan, Armhole Princess Raglan, Semi Raglan, Gathered Raglan, Pleats Raglan, Cowl Raglan, Origami Raglan, Circular Curved Raglan, Capes Raglan and Constructive Design Raglan and the patterns per design were presented. For creative and experimental clothing by the analysis of the features of raglan sleeve structure, a variety of configuration methods need to be developed and implemented. The analysis results of this study will contribute to the development of the fashion industry through small quantity batch production pursuing unique styles as the basis for further study on the configuration methods of raglan sleeves. This study will be used in various ways as education materials on sleeve patterns in the educational field. Through the analysis of sleeve patterns, this study tries to provide basic data for planning the design of raglan sleeves and helping to diversify the ladies' apparel market in the future.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.26 no.2
• /
• pp.60-71
• /
• 2022

The reusable, low-cost launch vehicle development trend in the recent launch vehicle market is being subdivided into several ways, and the throttleable engine is one of them. Plus, several nations have selected methane as a next-generation propellant due to its cleanness. In this research, a throttleable pintle injector using gas methane and liquid oxygen as propellants was developed, followed by its spray and combustion characteristics analysis, including high pressure cold and hot tests. The designed throttleable pintle injector has a double sleeve structure, and its tightness and functionality are confirmed through repetitive atmospheric, high-pressure cold tests, and hot tests. Though some design errors were discovered and a low throttling level was unable to be achieved in the combustion test.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.28 no.3
• /
• pp.27-36
• /
• 2024

This study established a BIM procedure considering manufacturing errors in the production process, and evaluated the flexural ductility of precast all-lightweight aggregate concrete special shear walls (PLASWs) with spliced sleeve technique. In the production process, the concrete cover thickness of PALSW was on average 1.28 times greater than the cross-sectional details of the specimen modeled with Revit BIM program. In particular, the bending inner radius of the hoop and inner-cross tie were greater than the designed details. Consequently, the confinement effect of core concrete reduced from 64% to 54% due to the manufacturing errors in the transverse reinforcing bars, resulting in a decrease in the ductility of PALSW by approximately 4.91%. Considering these findings, the BIM of PLASW with spliced sleeve technique should compliment the bending inner radius of the transverse reinforcing bars, and the defined brittleness increase coefficient reflecting the decreased core concrete confining pressure in the stress-strain relationship of confined concrete should be evaluated as 1.8.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1991.06a
• /
• pp.63-69
• /
• 1991

프로팅링저어널베어링은 저어널과 슬리브 사이에 자유롭게 움직일 수 있는 링을 삽입하여 이중의 유막이 형성되도록 한 것이다. 프로팅링저어널베어링은 이중의 유막을 가짐으로 인해 유량이 많이 필요하여 열적 특성이 좋고 마찰손실이 작으며 외축유막의 진동감쇠작용을 기대할 수 있으나, 링에 의해 내외축유막이 분리되어 있으므로 내축유막에 윤활제를 공급하는 것이 쉽지 않은 문제점이 있다. 동베어링에 대한 윤활제의 공급방법으로는 축을 통한 공급을 고려하지 않을 경우 다음과 같은 두가지를 생각할 수 있다. 첫째, 링에 내외축유막을 연결하는 급유구를 뚫어 외축유막으로 공급된 윤활제의 일부가 급유구를 통해 내축유막으로도 공급되도록 하는 방법 둘째, 축방향의 일단에서 내외축유막에 직접 가압급유하는 방법 이 가운데 둘째 방법은 축방향의 일단이 윤활제에 완전히 잠겨 있도록 밀봉하여야 하는 번거로움이 있으므로 잘 사용되지 않고 첫째 방법을 사용하는 것이 일반적이다. 첫째 방법에서도 링내외면에 원주방향급유홈을 파면 내외축유막으로의 윤활제공급이 보다 더 원활히 이루어 질 수 있을 것으로 기대되는데, 본논문에서는 이와 같이 원주방향급유홈이 있는 베어링을 원주방향급유홈 프로팅링저어널베어링이라 부르기도 하고, 이에 대하여 해석하고자 한다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.286-286
• /
• 2009

According to previous report, aged sleeves for old transmission lines have various defect such as biased installation or corrosion of steel sleeve. These defects can cause serious accidents such as rapid increasing of sag or falling out of overhead conductor from sleeves. Moreover, the defects have been limited power capacity of transmission line. This paper study on mechanical and thermal behavior of ACSR $410mm^2$ conductor and sleeve with various defect model. The conductor has been aged artificially for 50 years. The detailed results were presented in the text.

• Computational Structural Engineering
• /
• v.5 no.1
• /
• pp.83-89
• /
• 1992

A practical method of estimating inelastic deflection of reinforced concrete slab under service load is presented. Based on the elastic results of linear finite element analysis and area of reinforcement, inelastic deflection multiplier(.betha.) is evaluated and desired deflection as a measure of serviceability of the designed slab is obtained. Example for the corner supported slab shows that the results from the proposed method agree well with those from the experiment/and nonlinear finite element analysis. Application of the method to the design of irregular slab is also considered.