• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.3
• /
• pp.1054-1060
• /
• 2013

Fuel tank of a rotorcraft has a great influence on the survivability of crews. For a long time, US army has tried to develop the proper material for fuel cell of a military rotorcraft. As a result, the design specification of fuel cell, MIL-T-27422A, was issued for the first time on 1961. Through a few revisions, it has been developed to ML-DTL-27422D in 2007. It should be assured that fuel cell satisfies the requirement defined in MIL-DTL-27422D. The qualification test of this specification is classified into Phase I test for material and Phase II for fuel cell itself. This paper studies test conditions and procedures of slosh & vibration, gunfire resistance and crash impact test. They are considered as the most important tests which have a high possibility of failure. The rational consideration of this paper can improve the ability for estimating not only the validity of test procedure and test condition but test result. Based on the rational consideration, it is expected that the ability of the systematic development can be improved.

• Clean Technology
• /
• v.24 no.4
• /
• pp.280-286
• /
• 2018

In this study, the adsorption performance of vapor phase VOCs under dry conditions was evaluated by using two metal oxides, $TiO_2$ powder and $Al_2O_3$ powder. BET analysis and ammonia in-situ FT-IR analysis were used to analyze specific surface area and surface acid site. As a result, $TiO_2$ powder and $Al_2O_3$ powder had a specific surface area of $317.6m^2\;g^{-1}$ and $64m^2\;g^{-1}$, respectively. In the case of $TiO_2$ powder, many acid sites were observed on the surface. As a result of evaluating the vapor phase VOCs adsorption performance using two metal oxide powders, $TiO_2$ powder having a relatively large specific surface area and a large number of acid sites exhibited relatively good adsorption performance. In particular, it is considered that the specific surface area directly affects the adsorption performance, and further study on the effect of the acid site is required. Based on the $TiO_2$ exhibited excellent adsorption performance, it manufactured into various forms of honeycomb, hollow fiber and disc. As a result, the adsorption performance was lower than that of the powder, but it is advantageous in view of applicability. In addition, it was confirmed that the disc adsorbent having excellent thermal durability due to the characteristics of the manufacturing process stably maintains adsorption performance even at a high temperature desorption process several times.

• The Journal of Korean Philosophical History
• /
• no.52
• /
• pp.213-241
• /
• 2017

The systematic research on the Joseon history under Japanese imperialism in the 1920s, including that of the Joseon History Compilation Committee, was one of the stratagems that Japan employed to perpetuate the colonization of Joseon. The 'renovation of national traits', one of the three cultural measures taken by Japanese imperialism after the 1919 Independence Movement, was an attempt to degrade Joseon's nationality as extraneous, dependent, factional, and uncivilized. Against this, Koreans tried to create their own tradition that could prove Joseon's uniqueness and independence. The purpose of their study on ancient history, which became animated in the 1920s, was not to escape from the reality of Joseon into the idealized past, but to construct the history of Korean people anew. In this context, Dangun could refer to cultural identity as the communal origin of the nation, and this invented identity could lead to the healing of the injured subject. An Hwak's attempt was part of this efforts to call out myth as history. He suggests that Joseon's national traits are superior even to the Western civilization in several ways, and his vast plan to set up Joseon's cultural uniqueness and identity as history of universal civilization bore fruit in the History of Joseon Civilization. With cultural research for figuring out Joseon's national peculiarity and identity and historiography for revealing Joseon's national potential, he makes it possible for people to imagine various agents in the Joseon's past as belonging to a single nation with an identical history. Through his study on Joseon, he fought back the Japanese colonial view of history and tried to exalt national consciousness. Asserting independent and rational individuals as agency of civilization and culture though firm in the national perspective, he eventually went a way quite different from that of Japanese history of culture.

• Horticultural Science & Technology
• /
• v.33 no.6
• /
• pp.891-899
• /
• 2015

The lily symptomless virus (LSV) is the most common virus in Korean native lilies and causes various types of damage to overall plant growth. This study was carried out to investigate the elimination rate of the LSV by the in vitro scale culture (scaling) method in Korean native lilies and to test reinfection rates of the LSV under several field culture conditions of bulb production. Four Korean native lilies (Lilium dauricum, L. distichum, L. lancifolium, and L. maximowitzii) were used and their scales were cultured in vitro for micro-scale formation. The micro-scales were subcultured repeatedly using MS culture medium supplemented with 30 or $90g{\cdot}L^{-1}$ sucrose. The culture conditions were $24{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$ PPFD with 16 hour daylength using fluorescent lamps and maintained at $22{\pm}2^{\circ}C$. The virus-free bulblets were grown for one to three years in the greenhouse and transplanted to the field in October or March. Virus infection rates were investigated by direct tissue blotting immunobinding assays and measurement of chlorophyll and protein contents. Virus-free plants could be obtained from the 5th subculture of micro-scales in L. lancifolium and L. maximowitzii or from primary culture in L. dauricum and L. distichum. LSV-free plants were reinfected during bulb production in the field. Reinfection rates were higher at older bulb ages and under higher planting density. The plants planted in October and at inland Gyeongsan had higher infection rates than those planted in March and at coastal area Pohang. The reinfection rate of L. maximowitzii was higher than those of L. dauricum and L. lancifolium. The LSV-infected plants had lower chlorophyll contents and unchanged protein contents compared to virus-free plants.

• Journal of Nutrition and Health
• /
• v.36 no.1
• /
• pp.9-17
• /
• 2003

The preparation method of a soluble dietary fiber from oak wood (Quercus mongolica) and the effect of the soluble dietary fiber on physiological function in rat fed high cholesterol diets was investigated. The best condition for steam explosion method was 25 kgf/㎤ pressure for 6 min. The exploded samples were delignified by the filtration treatment with 1% NaOH for several times, which is the best condition. The enzymatic hydrolysis of Cellusoft cellulase was more effective than Onozuka R-10 cellulase. The manufactured soluble dietary fiber was assayed using gel permeation chromatography (GPC) and it was dissolved in water. Average molecular weight distribution of manufactured soluble dietary fiber was about 348-1,200 and it was assumed the oligomer form fraction. In order to compare the manufactured soluble dietary fiber with commercial soluble dietary fiber (pectin) on the physiological function, Sprague-Dawley male rats weighing 100$\pm$10 g were randomly assigned to one normal diet and five high cholesterol diet containing 1% cholesterol. The high cholesterol diet groups were classified to fiber free diet (FF group), 5% pectin (5P group), 10% pectin (l0P group), 5% manufactured soluble dietary fiber (5M group) and 10% manufactured soluble dietary fiber (10M group). Body weight gains in all soluble dietary fiber groups were lower than FF group. Food intakes were increased in all soluble dietary fiber groups than that of FF group. Food efficiency ratio (FER) was significantly decreased in all soluble dietary fiber groups than that of the FF group, and it was especially was highest in 10% supplemented soluble dietary fiber group. The weight of liver of the soluble dietary fiber supplemented groups were lower than those of the FF group, but weights of cecum and small intestine of all supplemented soluble dietary fiber groups were significantly increased, compared with that of FF group. The weights and water contents in feces were significantly increased by the soluble dietary fiber. The activity of the glutamic oxaloacetic transaminase in soluble dietary fiber groups were significantly decreased than those of FF group. The hepatic glutathione S-transferase activity in all soluble dietary fiber supplemented groups were higher than that of FF group. The physiological effects of the manufactured soluble dietary fiber are the same as the commercial soluble dietary fiber (pectin). The preparation method of the soluble dietary fiber from the oak chips suited to its purpose. (Korean J Nutrition 36(1) : 9~17, 2003)

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.4 no.1
• /
• pp.11-26
• /
• 1984

The aim of this study is to establish a synthetical optimal method that simultaneously analyze and design reinforced concrete flat slab-column structures involving multi-constraints and multi-design variables. The variables adopted in this mathematical models consist of design variables including sectional sizes and steel areas of frames, and analysis variable of the ratio of bending moment redistribution. The cost function is taken as the objective function in the formulation of optimal problems. A number of constraint equations, involving the ultimate limit state and the serviceability limit state, is derived in accordance with BSI CP110 requirements on the basis of limit state design theory. Both objective function and constraint equations derived from design variables and an analysis variable generally become high degree nonlinear problems. Using SLP as an analytical method of nonlinear optimal problems, an optimal algorithm is developed so as to analyze and design the structures considered in this study. The developed algorithm is directly applied to a few reinforced concrete flat slab-column structures to assure the validity of it and the possibility of optimization From the research it is found that the algorithm developed in this study is applicable to the optimization of reinforced concrete flat slab column structures and it converges to a optimal solution with 4 to 6 iterations regardless of initial variables. The result shows that an economical design can be possible when compared with conventional designs. It is also found that considering the ratio of bending moment redistribution as a variable is reasonable. It has a great effect on the composition of optimal sections and the economy of structures.

• Journal of Chest Surgery
• /
• v.30 no.10
• /
• pp.966-972
• /
• 1997

Between June 1994 to August 1996, 13 patients underwent emergency coronary artery bypass operations. There were 3 males and 10 females and ages ranged from 56 to 80 years with the mean of 65.5 years. The indications for emergency operations were cardiogenic shock in 12 cases and intractable polymorphic VT(ve'ntricular tachycardia) in 1 case. The causes of cardiogenic shock were acute evolving infarction in 6 cases, PTCA failure in 4 cases, acute myocardial infarction in 1 case, and post-AMI VSR(ventricular septal rupture) in 1 case. Pive out of 13 patients could go to operating room within 2 hours. However, the operations were delayed from 3 to 10 hours in 8 patients due to non-medical causes. In 12 patients, 37 distal anastomoses were constructed with only 3 LITA's(left internal thoracic arteries) and 34 saphenous veins. In a patient with post-AMI VSR, VSR repair was added. In a patient with intractable VT and critical sten sis limited to left main coronary artery, left main coronary angioplasty was performed. Pive patients died after operation with the operative mortality of 38.5%. Three patients died in the operating room due to LV pump failure, one patient died due to intractable ventricular tachycardia on postoperative second day, and one patient died on postoperative 7th day due to multi-organ failure with complications of mediastinal bleeding, low cardiac output syndrome, ARF, and lower extremity ischemia due to IABP. In 8 survived patients, 3 major complications (mediastinitis, PMI, UGI bleeding) developed but eventually recovered. We think that the aggressive approach to critically ill patients will salvage some of such patients and the most important factor for patient salvage is early surgical intervention before irreversible damage occurs.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.35 no.3
• /
• pp.67-75
• /
• 2017

The culture of Gugok (九曲) and Dongcheon (洞天), which tries to reach the ideological culmination in Confucianism, was widespread throughout the Joseon dynasty. This was an extension of the spirit of studying and honoring Zhu Xi (學朱子, 尊朱子); thereby, Confucian scholars in Joseon expressed the will to follow the teachings of Zhu Xi (朱子) and comforted themselves that they were in the course of attaining the truth. As a realization of this expression of will, scholars designated and operated various scenic sites as Gugoks, following the example of Zhu Xi's Mui Gugok (武夷九曲), and Dongcheons, as a representation of the utopia. These designations are widespread nationwide, with around sixty Gugok locations that have now been reported in academia. However, the actual number of Gugoks exceeds this number, and many of them are currently not identified concerning the exact locations. Therefore, the purpose of this study is to identify the locations of Gugoks and Dongcheons scattered around Seoul, Gyeonggi and Gangwon regions. For the coordinates of Gugoks and Dongcheons, this study referred to the literature, web search and the books published by local cultural institutes. Based on the collected information, the researchers conducted field trips to investigate whether the record exists as a real location and, if so, acquired their coordinates. This study also provides the tables of Gugok or Dongcheon that only exists in the imagination, existed before but now are lost, or are inaccessible. Eight locations in Seoul, Gyeonggi, and Gangwon regions are understood as Gugok. Among them, Gogun Gugok and Okgye Gugok have relatively clear locations and records. Byeokgye Gugok and Suhoe Gugok, on the other hand, has many locations and titles overlapped, and their established time and managers are unclear. As for Ui Gugok in Seoul, it is known to be set by Hong Yangho, but some parts of its locations are confirmed, others are in dispute, and many locations are damaged. Thirty-eight locations in Seoul, Gyeonggi, and Gangwon regions are understood as Dongcheon. There are sixteen Dongcheons in Seoul area. Among them, those including Dohwa Dongcheon, Yangsan Dongcheon, and Ssangnyu Dongcheon actually exist but are forbidden to be accessed. There are thirteen Dongcheons in Gyeonggi area. The exact location of Onsu Dongcheon cannot be confirmed because of the development; Gwirae Dongcheon has historical records, but the actual existence cannot be confirmed. There are nine Dongcheons in Gangwon area. The researcher judged that Hwaeum Dongcheon is the misspelled record of Hwaeumdong Jeongsaji (華陰洞精舍址), which is located at the upstream of Gogun Gugok.

• The Journal of Korean Academy of Prosthodontics
• /
• v.49 no.1
• /
• pp.1-7
• /
• 2011

Purpose: The purpose of this study was to investigate the cutting efficiency of coarse grit diamond burs with air-turbine handpiece on natural tooth. Materials and methods: Four groups of coarse grit diamond bur were selected: Komet (A), Shofu (B), Premier (C), and Mani (D). The extracted maxillary central incisors were used, and ten cuts were made on each specimen, using the rotary diamond burs. The surface of each bur was measured at the upper, middle, and bottom of the bur with confocal laser scanning microscope and imaged with SEM. The data were analyzed with one-way ANOVA and t-test at the significance level of 0.05. Results: The surface roughness was measured. At the A diamond bur, the Sa values were $52.93\;{\mu}m$, $48.32\;{\mu}m$, $46.79\;{\mu}m$, $45.06\;{\mu}m$, and $43.43\;{\mu}m$ for control, test 1, 2, 3, and 4 respectively. The Sa values were $50.68\;{\mu}m$, $45.62\;{\mu}m$, $44.41\;{\mu}m$, $44.10\;{\mu}m$, and $42.46\;{\mu}m$ for B diamond bur, $58.02\;{\mu}m$, $55.53\;{\mu}m$, $52.22\;{\mu}m$, $48.26\;{\mu}m$, and $45.36\;{\mu}m$ for C diamond bur, and $50.11\;{\mu}m$, $46.73\;{\mu}m$, $45.46\;{\mu}m$, $42.58\;{\mu}m$, and $41.80\;{\mu}m$ for D diamond bur. Surface roughness after each bur use showed significant changes, but no significant difference was found in surface roughness change between bur systems. Conclusions: Surface roughness in the same bur system showed significant differences after each tooth preparation. However no statistically significant differences were found in surface roughness between bur systems. The SEM images between control and test 4 showed the abraded particles.

• The Journal of Korean Academy of Prosthodontics
• /
• v.52 no.2
• /
• pp.105-112
• /
• 2014

Purpose: The aim of present investigation was to find out the influence of several times iatrogenic mobilization in the initial stage of implant installation on bone-implant osteointegration. Materials and methods: The experimental implants (3.75 mm in diameter, 8.0 mm in length) were made of commercially pure (Grade IV) titanium, and were treated with RBM ($MegaGen^{(R)}$: Ca-P) on lower 4.0 mm part. Only lower part of implant was inserted to bone and the implants were nonsubmerged. The 130 implants (two in each tibia) were inserted into the monocortical tibias of 33 rabbits which each weighed more than 3.5 kg (Female, New Zealand White). According to the removal torque interval, the groups were divided into 13 groups, group I (1 day), group II (1 day + 2 days), group III (1 day + 2 days + 3 days), group IV (1 day + 2 days + 3 days + 4 days), group V (2 days), group VI (2 days + 4 days), group VII (2 days + 4 days + 6 days), group VIII (2 days + 4 days + 6 days + 8 days), group IX (4 days), group X (4 days + 7 days), group XI (4 days + 7 days + 10 days), group XII (4 days + 7 days + 10 days + 14 days) and control group. In the control group, the removal torque was measured at 8 weeks with a digital torque gauge (Mark-10, USA). In the experimental groups, the removal torque was given once, twice, three times or four times by experiment design before the final removal torque and the value was measured each time. The implants were then screwed back to their original positions. All the experimental groups were given a final healing time of 8 weeks after placement, in which values were compared with the control groups and the 1st, 2nd, 3rd or 4th removal torque values in each experimental group. Results: In comparison of the final removal torque tests among experimental groups, the removal torque value of experimental groups except group XII were not statistically different that of control group. And the values of group I and II were significantly higher than the values of group VI, VIII, X, XI, and XII. In addition, the values of group III, IV, and V were significantly higher than group XI and XII. In comparison of the removal torque in the each experimental group, the final removal torque were significantly higher in all groups except group VIII, X, XI, and XII. Conclusion: If sufficient healing time was allowed, a few mobilization of fixture at the very early stage after the implant placement in the rabbits didn't interrupt the final bone to implant osseointegration.