• Journal of the Institute of Convergence Signal Processing
• /
• v.5 no.3
• /
• pp.210-215
• /
• 2004

The dynamic model of ac servo motor is influenced very much due to rotor resistance change and nonlinear characteristic. By using the sliding mode control the dynamic behavior of system can be made insensitive to plant parameter change and external disturbance. This paper describes the application of the sliding mode control for position control of ac servo motor. The control scheme is derived and designed. A design method based on external load parameters has been developed for the robust control of ac induction servo drive. The proposed control scheme are given based on the variable structure controller and slip frequency vector control. Simulated results are given to verify the proposed design method by adoption of sliding mode and show robust control for a change of shaft initial J, viscous friction B and torque disturbance.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.17 no.1
• /
• pp.112-115
• /
• 2003

Robust control for servo control system in needed according to the highest precision of industrial automation. However, when a servo control system has an effect of disturbance, it is very difficult to guarantee the robustness of control system. As a compensation method solving this problem in this paper, Hybrid control method of Main controller(PIU)-Differential Supervisory controller is presented. Main controller is operated as a feedback controller. Differential Supervisory controller as a assistant controller is operated when state in unstable disturbance. The robust control function of Differential Supervisory controller is demonstrated by Speed control of Motor.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.20 no.4
• /
• pp.562-568
• /
• 2010

Until now, the implementation of servo motor control units which is being applied in various industrial ares such as industrial system, office equipment, home appliance and robotics, used the MCU and DSC(or DSP). However, MCU and DSC have limitations of not being able to maximize control efficiency of the motor and the flexibility. Thus, in this paper, we propose and implemented the designing method for development of servo motor control IP based on FPGA which have a structure to make the best motor control efficiency and flexibility of control,

• ICROS
• /
• v.5 no.1
• /
• pp.35-40
• /
• 1999

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1995.10a
• /
• pp.261-266
• /
• 1995

본 연구에서는 자기부상시스템에 대해 흡인식 자기부상방식을 채택하고 쇠구슬에 대한 운동을 상하 1자유도로 가정하여 운동방정식을 세운다. 이때 전자석이 자기 부상력은 전자석에 흐르는 전류와 인덕턴스의 함수라 가정하고, 모델의 불확실성은 자기부상계의 운동 방정식으로부터 선형화 할 때 발생하는 오차 및 파라미터 변동으로 생각한다. 또한 모델의 불확실성이 존재하더라도 정상편차 없이 부상하는 서보제어계를 설계한다. 그런데 저자등은 강인성 문제 및 정상편차 없는 것에 역점을 두어 H$_{\infty}$ 제어이론에 기초한 1형 로바스트 서보 제어기를 구하여 자기부상 시스템의 안정화 제어계로써 적용한 적이 있다. 이때 중심해 이외의 해를 이용하여 설계한 서보 제어계는 자기부상계의 과도상태시에 일어나는 오버슈트를 줄일 수 없었다. 따라서 시스템 내부 안정화를 위하여 H$_{\infty}$ 제어이론에 의해 설계된 피드백(feedback) 제어기와 물체가 부상할 때 오버슈트를 줄이고 제어량이 목표치에 잘 추종하기 위해 설계된 피드 포워드(feed forward) 제어기로써 2자유도를 갖는 제어계를 설계한다. 이렇게 설계한 2자유도 제어계를 가지고 모의 응답실험과 본 연구자들이 만든 자기부상 시스템의 실험결과를 비교함으로써 설계된 제어기의 타당성을 조사한다.

• Journal of Advanced Navigation Technology
• /
• v.9 no.1
• /
• pp.19-27
• /
• 2005

For continuous communication between moving vehicles such as satellites and unmanned aerial vehicles, an antenna system having at least more than 2-axes is needed. When the antenna is mounted on a moving vehicle such as ground vehicle, ship and so on, a stabilization and tracking system must be equipped to compensate the roll, pitch and yaw motion of the vehicle. The performance of stabilization and tracking system mainly depends on the servo control system that driving the antenna pedestal. Therefore, in this paper, a Fuzzy-PID controller for a stabilization and tracking system of a 2-axes antenna was designed and the performance was verified. To verify the verification of designed servo control system, the performance of the conventional PID controller and that of the Fuzzy-PID controller, designed by the same PID control gains, was compared.

• Proceedings of the KIPE Conference
• /
• 2018.07a
• /
• pp.406-407
• /
• 2018

본 논문에서는 SPMSM의 속도 및 전류제어기를 PI 혹은 I-P제어기를 조합한 네 가지 형태의 제어시스템으로 구성하여 서보시스템에 가장 적합한 형태의 제어시스템 구성과 설계기법을 도출하고, 시뮬레이션 해석을 통해 유효성을 검증한다.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.18 no.1
• /
• pp.67-72
• /
• 2004

AC servo system has been implemented to FA system and also depends on its quality. Recently with the development of power switching device and DSP which has peripheral devices to control AC servo system, the servo technology has met a new development opportunity. A DSP based AC servo system with a 3-phase PMSM is proposed. The newly produced DSP TMX320F2812-version C which has the performance of fast speed, 150MIPS, and rich peripheral interface is used. Also space vector pulse width modulation (SVPWM) and the digital PI control are implemented to the servo system

• ICROS
• /
• v.6 no.1
• /
• pp.16-19
• /
• 2000

• Proceedings of the KIEE Conference
• /
• 2002.11c
• /
• pp.218-223
• /
• 2002

광 디스크 드라이브에서의 서보 제어시스템에는 광 픽업에서 발생된 레이저 빔을 디스크 기록면의 데이터 트랙에 정확히 위치시키기 위한 제어 계를 갖고 있다. 광 디스크의 고배속화에 따른 외란의 주파수 대역의 증가에 따라 더욱 더 높은 샘플링 주파수로 레이저 빔의 위치 제어를 필요로 하게 되고, 여러 가지 알고리즘의 증가로 인해 DSP의 연산 부담은 증가하게 된다. 본 논문에서는 서보 제어에 필요한 알고리즘의 최적화된 하드웨어/소프트웨어 시스템을 구현하고 이를 이용한 실험 결과를 제시한다.