• Journal of Life Science
• /
• v.26 no.12
• /
• pp.1438-1445
• /
• 2016

Yeast can be post-contaminated by the equipment, producer, or air, and this can degrade yogurt quality. This study aimed to demonstrate the yeast inhibiting effect in fermented milk by adding Lactobacillus paracasei and Lactobacillus rhamnosus along with current fermenting lactic acid bacteria such as Lactobacillus delbrueckii subsp. bulgaricus and Streptococcus thermophilus. A certain amount of yeast was added to fermented milk samples that were soon after stored at variable temperatures, and the number of yeast cells was counted periodically. The swelling phenomenon caused by the gas produced by the yeast in fermented products was also observed. In the two experiments, compared to the control, the L. paracasei- and L. rhamnosus-added-groups showed much slower rate of yeast appearance and lower frequency of swelling phenomena. This suggests that using a mixture of L. paracasei and L. rhamnosus in fermented milk inhibits the growth of yeast. Furthermore, if the products are stored at $10^{\circ}C$, post-acidification is rarely seen in the experimental group compared to the control group. This means that the organoleptic flavor can be kept consistent from the production day till the expiration day, resulting in improved organoleptic quality for customers. In other words, the use of L. paracasei and L. rhamnosus in fermented milk will result in the following positive effects: improvement in storage stability by delaying yeast appearance, increase in quality consistency by inhibiting post-acidification, and improved organoleptic quality by enhancing texture and flavor.

• Proceedings of the Safety Management and Science Conference
• /
• 2013.11a
• /
• pp.483-497
• /
• 2013

현대사회가 발전 할수록 대량산업화와 도시화가 심화되어 건축물의 초고층화 및 대형화가 증가하고 있으며, 안전적인 건축물 보다는 건물 및 제조사업장의 시각적인 디자인에 치우쳐 화재하중이 높은 건축자재의 내 외장재 및 고급스러운 장식물을 사용함으로써 그 위험뿐 만 아니라 화재발생시 대규모 인명 및 재산상의 피해를 가져오게 된다. 그리고 제조사업장화재는 화재로 인한 직접적인 손실 즉 물적 손실은 물론 생산중단으로 인한 간접적인 손실은 실로 측정하기가 어렵다. 지금까지 발생한 제조사업장화재의 발화요인별 분석은 부주의, 전기적, 미상 순으로 인한 화재가 가장 많고 발화열원은 작동기기, 담뱃불(라이터), 마찰 전도 복사등이 주요 원인이 되고 있고 대형화제 취약시설로는 공장 및 창고로 나타나고 있다. 소방방재청의 통계자료를 살펴보면 2012년 화재 발생현황 중 발화요인에 대한 화재별 장소 건수를 검토 한 결과 비주거의 화재발생 16,009건 중 5,758건으로 (36%)부주의이고, 주거에도 화재발생 10,715건 중 5,560건으로 51.9%의 부주의로 가장 높은 것으로 나타났다. 그러므로 제조사업장의 사소한 부주의로 발생하는 화재를 예방하기 위해서는 소방안전관리자의 처우개선과 기업활동규제완화의 겸직 허용을 재검토 하여야 하며, 소방안전관라자의 실무능력 강화를 위한 소방안전관리 실무교육과정을 이론적 교육 보다는 현장 실습위주로 할 필요가 있다. 이를 위해서는 소방안전관리자에 대한 법정 실무교육 횟수를 확대하여 현행 2년에 1회 에서 1년에 1회로 하고, 실무교육에 있어서도 우수송방안전관리 업체를 선정하여 화재예방에 대한 구체적인 업무를 활성화 하고, 문제 발생요소들을 분석하여 실습을 통한 소방안전관리자의 실무교육을 실시해야 할 것이다. 이러한 전문 소방안전관리자로 소방대상물의 소방교육 및 훈련을 성실히 수행 해야 할 것 이다. 한순간의 부주의로 인하여 화재가 발생하면 돌이킬 수 없는 수백명의 생명을 앗아가고, 수백억원대의 재산피해를 줄이기 위해서는 소방안전관리자의 역량을 넓히고 화재예방 업무를 최우선적으로 수행해야 할 것이다. 화재예방을 위해 소방안전관리자의 업무개선 및 전문교육을 활성화 하여 업무능력을 향상 시켜 화재발생시 초기진압에 신속하고 정확하게 대처해야 한다는 것이 전문적인 화재예방 대책 일 것이다.

• Land and Housing Review
• /
• v.4 no.4
• /
• pp.383-393
• /
• 2013

The trends of green growth and eco-friendliness came to be the core development indicator for the sustainable global environment. Korean government reflected these trends in the main flows of the national development index, and suggested diverse directions for green construction technologies and high quality construction environment through Third master plan for construction environment. However, the efforts to follow these trends during the construction process as a step for production phrase are not being considered enough yet. In this study, we identified the basic environmental management factors in order to enhance the eco-friendliness of public housing construction sites, and suggested the reasonable conducting parties and process for those respective factors. The results of this study are expected to be the valuable reference in defining the required activities and participants' responsibilities, and improving the work process for systematic on-site environmental management. In applying those results, the discussion should be followed on the executing party of each unit activity and the responsibility assignment for each process. At the same time, the legislation and standard related to environment need to be essentially amended. In the future, the method of evaluating the environmental management activities, and the technical solution to environmental problems are to be reviewed as a further research for successful environmental management.

• Land and Housing Review
• /
• v.4 no.4
• /
• pp.425-434
• /
• 2013

The Small and Medium Business Administration specified 123 construction materials mandatory to purchase directly and forced the public owners to provide the contractors with materials as required by related law. This study extensively reviewed various characteristics and management factors of the owner-providing materials consumed in the public apartment housing under Direct Buying System(DBS) from the public owner's perspective. Subsequently, the major managed materials were identified, and the proper response plan was developed along the material procurement process. The Procurement Management Load Indices (PMLI) of 43 materials were evaluated according to rating criteria with procurement path, project-specified level, user requirement level, supplier's responsibility, on-site work requirement, additional parts, and inspection standards. The tile and aluminum windows were classified in the group needing high-level procurement efforts to reduce the errors and ensure the efficiency. The accurate quantity estimation method, definite purchase details, management activity definition before and after production, additional quantity for rework, interference coordination were defined as the essential activities for effectively responding to DBS.

• Korean Journal of Construction Engineering and Management
• /
• v.14 no.5
• /
• pp.164-174
• /
• 2013

It has been seriously difficult to create demand of modular construction because Korean modular method has been considered as container house or lightweight steel house. Actually, barrier factor of modular construction for activation was difficult to produce modular continuously in factories based on stable amount of demands. So, this research found successive factors of modular construction and proposed the method of demand creation through a plethora of case analysis by building types. In addition, this research found the scale of modular potential market. Owners will be able to use this strategy that is proposed in this research when they make a decision about construction system. Also, the modular construction can make potential market in Korea. As a result, modular system producer can make their business strategies and make continuous demand by conjugating the method of creating demand for modular construction which is proposed in this research.

• Proceedings of the Korean Society of Postharvest Science and Technology of Agricultural Products Conference
• /
• 2003.10a
• /
• pp.151-152
• /
• 2003

최근 NMR, MRI, x-선 등 전자파의 기술이 발전되면서 이들을 이용하여 내부품질을 검출하는 보다진보된 연구가 수행되고 있다. 관련 연구로는 자기공명영상을 이용하여 내공수삼 및 정상수삼의 내부를 촬영하여 T$_1$, T$_2$의 값을 측정하여 내부조직의 이상유무를 추정하였고, 또한 MRI에 의해 수삼의 내부품질 뿐만 아니라 연근 판정 가능성을 검토하는 등 많은 연구가 수행되고있다. 이 연구에서는 MRI 시스템을 이용하여 수삼의 내부단면 영상을 획득하여 내부결함 유무를 검출하고, 또한 동일한 수삼을 대상으로 홍삼 제조 후 내부품질의 변화 특성을 조사하고자 수행하였다. 공시재료는 충북 음성에 있는 인삼연초연구원에서 4~6년 근 된 수삼을 이용하였고, 시험 장비로는 국내 MRI 생산 전문 업체인 ISOL Tech. Co.에서 개발한 의료용 장비인 CHORUS 1.5T(자속밀도 1.5 Tesla)를 이용하였다. 슬라이스 두께/간격은 5mn/5mn, 촬영 단면수는 15장/시료, 영상영역(FOV)은 180mmx90mm, image size는 256$\times$128 pixels 그리고 TR/TE는 각각의 이완상수별로 500/13(Tl), 4,000/63(T2) 및 2,200/21(Pd)에 대한 단면영상을 얻었다. 5개의 수삼을 동시에 뇌두에서 뿌리 쪽으로 MR 단면영상을 획득하였다. 이완상수 T$_1$, T$_2$, Pd에 대해서 MR 영상을 획득하였으며, 총 15장의 단면 영상 중 내부 상태를 가장 잘 식별 할 수 있는 영상을 조사한 결과 T$_1$과 Pd에서 촬영한 영상에서는 내부상태가 잘 나타났으나, T$_2$에서 얻은 영상은 영상의 손실이 많이 발생되었다. 한편, T$_1$에 대해서 뇌두에서 뿌리쪽으로 가면서 각 위치에 따라 수삼 내부의 부패된 영상이 나타나 이에 대한 판정은 가능한 것으로 나타났다. 2000년도와 2001년도에 각각 수확.저장된 수삼을 부위별로 단면영상을 MRI로 측정하고, 그 시료를 인삼연초연구원(음성시험장)에서 홍삼으로 제조한 후 수삼 상태에서의 내부품질과 홍삼으로 제조된 후의 내부품질 변화를 조사하였다. 총 20본의 수삼을 MRI 시스템으로 영상을 획득하였고, 모든 시료에 대해서 내부조직의 상태를 관찰하였다. 수삼의 수분함량은 뇌두로부터 1cm부위를 절단하여 조사하였고, 수삼조직은 절단시 단면의 달관 조사에 의한 성적이며 홍삼품질은 제조삼의 조직상태를 절단하여 육안판별로 검사하였다. 총 20본의 수삼 중 정상은 16본 이었고, 이들은 홍삼으로 제조된 후 내공 내백 등이 혼재되어 나타났으며 정상수삼이 정상홍삼으로 나타난 경우는 5본이었고, 내백은 5본, 내공은 6본으로 조사되었다. 또한 수삼에서 4본은 썩은 부위가 포함되어있는 수삼이었는데 홍삼으로 제조되었을 때 3본은 내백으로 되었고 1 본은 수삼에서 썩은 부위가 1/4정도로 미미해서 홍삼 제조시 정상으로 나타났다. 일반적으로 홍삼 제조시 내공의 발생은 제조공정에서 나타나는 경우가 많으며, 내백의 경우는 홍삼으로 가공되면서 발생하는 경우가 있고, 인삼이 성장될 때 부분적인 영양상태의 불충분이나 기후 등에 따른 영향을 받을 수 있기 때문에 앞으로 이에 대한 많은 연구가 이루어져야할 것으로 판단된다.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.44 no.11
• /
• pp.1693-1699
• /
• 2015

Overall quality of six kinds of commercial broiler breast fillets (A~F) retailed in Korea were examined, including proximate composition analysis, shape profile analysis, pH, color, tenderness, cooking loss, descriptive analysis, and consumer testing. A total of 120 breast meat fillets were purchased at a local market. Overall quality of broiler breast meat commercially available in Korea was found to vary significantly, indicating a broad range of product quality in the marketplace. Moisture content of meat ranged from 74.4 to 76.4%, whereas protein, fat, and ash contents were 21.8~25.2, 0.2~0.8, and 1.07~1.16%, respectively. The pH ranged from 6.2 to 6.4, whereas color values ($L^*$, $a^*$, and $b^*$) were 52.2~57.2, -3.5~0.5, and 8.3~13.6, respectively, among all products tested. Approximately 9% variation in cooking loss was detected depending on the products evaluated, whereas shapes (height, width, and length) of meat were also significantly different (15% variation on average). Product F was proven to be the least tender and least liked by consumers, implying that tenderness is a key attribute determining consumer acceptability of broiler breast meat.

• Journal of Korean Society of Forest Science
• /
• v.98 no.3
• /
• pp.247-254
• /
• 2009

In this study, linear programming was applied to a case study in Gwangreung Experimental Forest of Korea Forest Research Institute investigating the effect of the desired future conditions on forest management. Considering the social, economic and ecological demands of people from the forest, the forest functions were classified into four including natural conservation, timber production, water yield and scenic conservation. The forest land areas were divided into four-types of forest functional zones and forest management prescriptions including the desired future conditions by the forest function type were established. The Model II linear programming was used in optimizing the forest management planning. The model includes management policies, as the constraints, for non-declining yield, allowable cutting area, allowable % age class distribution and allowable % species allocation as well as the land and other accounting regimes. Maximization of timber production was used the objective function. Based on the Model II formulations, the effects of the desired future conditions by the forest function type on forest management planning were investigated in terms of timber production, net present value and stand structures over time.

• Journal of Digital Convergence
• /
• v.14 no.12
• /
• pp.73-84
• /
• 2016

The purpose of this study is to examine the global value chain of the global automotive industry to investigate the success factors through the example of the value chain of Hyundai Motor. It looks at the value chain of the well-known Korean automaker, Hyundai Motor, to find success factors with cases. It examines the process to build the supply chain of Hyundai Motor to analyze what impact it has on the growth of Hyundai Motor to look closely at the vertical division of labor of vehicle parts manufacturers. Korea's automobile industry has been expanding cooperation between two sectors as a multifunctional promotion focusing on electronic communications technology in machinery and technology center. Through introducing the nation's first vertical integration in the sector, Hyundai Motor has secured competitiveness of cost reduction and prestige car production. Hyundai Motor has operated and established factories in the United States, India, Turkey, the Czech Republic, Russia, and Brazil. Hyundai Motor operates 51 affiliates, such as Hyundai Mobis, by restructuring, mergers and acquisitions, and building their own vertical division of labor around it. Hyundai Motor has been overcoming dependence on foreign modules businesses and maintaining the supply value chain around Hyundai Mobis.

• Journal of Korea Port Economic Association
• /
• v.25 no.4
• /
• pp.45-62
• /
• 2009

The purpose of this study is to analyze the components and to verify the relationship among internal marketing, job satisfaction, organizational commitment and turnover intention in international logistics firm. In order to achieve the purpose of this study, literature survey related to internal marketing, job satisfaction, organizational commitment and turnover intention was carried out and took an empirical analysis by the use of questionnaire method for employees in international logistics firm. The final results and conclusions are as follows; Internal marketing of international logistics firm was positively related to job satisfaction and organizational commitment. Internal marketing, Job satisfaction and organizational were negatively related to turnover intention. Through this results, to increase job satisfaction and organizational commitment, and to decrease turnover intention, it is necessary to concentrate on improving internal marketing strategy.