• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.5
• /
• pp.849-863
• /
• 1992

A very simple and computationally efficient numerical method is developed for the free vibration of isotropic and orthotropic composite triangular plates. A set of two-dimensional simple series functions is used as an admissible displacement functions in the Rayleigh-Ritz method to obtain the natural frequencies, nodal patterns and mode shapes for the plates. From the prescribed starting function satisfying only the geometric boundary conditions, the higher terms in the series functions are constructed with adding order of polynominal. Natural frequencies, nodal patterns and mode shapes are obtained for right triangular plates with three different support conditions. The obtained numerical results are presented, and the isotropic and some orthotropic cases are verified with other numerical methods in the liternature.

• Journal for History of Mathematics
• /
• v.28 no.6
• /
• pp.321-332
• /
• 2015

This paper is concerned with the convergence of double trigonometric series and Fourier series. Since the beginning of the 20th century, many authors have studied on those series. Also, Ferenc $M{\acute{o}}ricz$ has studied the convergence of double trigonometric series and double Fourier series so far. We consider $L^p(T^2)$-convergence results focused on the Ferenc $M{\acute{o}}ricz^{\prime}s$ studies from the second half of the 20th century up to now. In section 2, we reintroduce some of Ferenc $M{\acute{o}}ricz^{\prime}s$ remarkable theorems. Also we investigate his several important results. In conclusion, we investigate his research trends and the simple minor genealogy from J. B. Joseph Fourier to Ferenc $M{\acute{o}}ricz$. In addition, we present the research minor lineage of his study on $L^p(T^2)$-convergence.

• Journal for History of Mathematics
• /
• v.27 no.1
• /
• pp.81-93
• /
• 2014

The $L^1$-convergence of Fourier series problems through additional assumptions for Fourier coefficients were presented by W. H. Young in 1913. We say that they are the classical results. Using modified trigonometric series is the convenience method to study the $L^1$-convergence of Fourier series problems. they are called the neoclassical results. This study concerns with the $L^1$-convergence of Fourier series. We introduce the classical and neoclassical results of $L^1$-convergence sequentially. In particular, we investigate $L^1$-convergence results focused on the results of Bhatia's studies. In conclusion, we present the research minor lineage of Bhatia's studies and compare the classes of $L^1$-convergence mutually.

• Journal for History of Mathematics
• /
• v.21 no.3
• /
• pp.67-96
• /
• 2008

In the 19th century Fourier and Dirichlet studied the expansion of "arbitrary" functions into the trigonometric series and this led to the development of the Riemann's definition of the integral. Riemann's integral was considered to be of the highest generality and was discussed intensively. As a result, some weak points were found but, at least at the beginning, these were not considered as the criticism of the Riemann's integral. But after Jordan introduced the theory of content and measure-theoretic approach to the concept of the integral, and after Borel developed the Jordan's theory of content to a theory of measure, Lebesgue joined these two concepts together and obtained a new theory of integral, now known as the "Lebesgue integral".

• Proceedings of the KIEE Conference
• /
• 2004.10a
• /
• pp.55-59
• /
• 2004

유한요소법을 이용하여 전자장을 해석할 경우 전류원이 전 영역에 비해 극히 작은 영역이면, 요소분할 과정에서 소스부분을 세분하여야 하므로 결국 미지수의 증가를 가져오게 된다. 또한, 선전류 문제의 경우 2차원 유한 요소 해석이 용이하지 않다. 이를 보안하기 위해 본 논문에서는 소스가 선전류이고 관심 영역이 선전류원으로부터 떨어져 있는 경우, 소스 영역은 해석해를 적용하여 유한요소법과 결합하는 방법을 제시하였다. 해석적인 해는 원통좌표계에서 반정에 대한 멱함수와 회전각도에 대한 삼각함수의 곱의 형태로 표현된다. 이때 두 종류의 적분 상수가 있는데, 이는 경계상의 포텐셜값과 유한요소법의 경계 적분항을 푸리에급수로 전개한 계수로 표현된다. 제안한 알고리즘의 검증을 위하여 해석해가 존재하는 모델을 설정하여 해석적인 방법, 기존의 유한요소 법 및 결합 방법에 의한 해를 비교 검증하였다.

• Journal of Educational Research in Mathematics
• /
• v.27 no.4
• /
• pp.833-855
• /
• 2017

This study aims to reinvestigate the reason for introducing radian as a new unit to express the size of angles, what is the meaning of radian measures to use arc lengths as angle measures, and why is the domain of trigonometric functions expanded to real numbers for expressing general angles. For this purpose, it was conducted historical, mathematical and applied mathematical analyzes in order to research at multidisciplinary analysis of the radian concept. As a result, the following were revealed. First, radian measure is intrinsic essence in angle measure. The radian is itself, and theoretical absolute unit. The radian makes trigonometric functions as real functions. Second, radians should be aware of invariance through covariance of ratios and proportions in concentric circles. The orthogonality between cosine and sine gives a crucial inevitability to the radian. It should be aware that radian is the simplest standards for measuring the length of arcs by the length of radius. It can find the connection with sexadecimal method using the division strategy. Third, I revealed the necessity by distinction between angle and angle measure. It needs justification for omission of radians and multiplication relationship strategy between arc and radius. The didactical suggestions derived by these can reveal the usefulness and value of the radian concept and can contribute to the substantive teaching of radian measure.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.16 no.3
• /
• pp.234-241
• /
• 2011

This paper proposes a simple static overmodulation strategy that extends the linearity of the inverter output voltage. The proposed method obtains the reference vector having the instantaneous value directly from the modulation index based on the magnitude of fundamental voltage, and has a simplified form of phase command. This method does not need trigonometric functions for calculating the magnitude of the reference vector. The magnitude of reference voltage and holding angle in the overmodulation region corresponding to the modulation index are determined in advance to have the same fundamental voltage magnitude by using the result of Fourier series expansion.

• Korean Journal of Optics and Photonics
• /
• v.4 no.3
• /
• pp.309-316
• /
• 1993

We find the vectorial solution of the optical waveguide with semicircular cross-section by expanding the electromagnetic fields of the waveguide into the series of trigonometric and Bessel funtions and by applying the boundary conditions at the finitely selected points on the interface of the core and the cladding. We find also the propagation constants and the energy distributions of the eigenmodes and discuss its properties. As a result of computation, we find that the electromagnetic fields of the even modes about the symmetric axis of the semircular shape are nearly the same as those of the odd modes except that E and H of the odd modes are replaced by -H and E and that the even and odd modes are degenerated as the ratio of refractive index of the core and cladding approaches to 1.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.22 no.5
• /
• pp.13-22
• /
• 2018

In this study, a governing differential equation for the bending problem of orthotropic rectangular plate is drived. It's exact solution for various boundary conditions is presented. This solution follows traditional method like Navier's solution or Levy's solution that transforms the governing differential equation into an algebraic equation by using trigonometric series. To obtain a solution by Levy's method, it is required that two opposite edges of the plate be simply supported. And the boundary conditions, for which the Navier's method is applicable, are simply supported edge at all edges. In this study, it overcomes the limitations of the previous Navier's and Levy's methods.This solution is applicable for any combination of boundary conditions with simply supported edge and clamped edge in x, y direction. The plate could be subjected to uniform, partially uniform, and line loads. The advantage of the solution is that it is the exact solution as well as it overcomes the limitations of the previous Navier's and Levy's methods. Calculations are presented for orthotropic plates with nonsymmetric boundary conditions. Comparisons between the result of this paper and the result of Navier, Levy and Szilard solutions are made for the isotropic plates. The deflections were in excellent agreement.

• Journal of Korean Society of Steel Construction
• /
• v.15 no.2
• /
• pp.97-107
• /
• 2003

To obtain a more accurate response from larninated composite structures, the effect of transverse shear deformation, transverse normal strain/stress, and nonlinear variation of in-plane displacements vis-$\\grave{a}$-vis the thickness coordinate should be considered in the analysis. The improved higher-order theory was used to determine the critical buckling load and natural frequencies of laminated composite structures. Solutions of simply supported laminated composite plates and sandwiches were obtained in closed form using Navier's technique, with the results compared with calculated results using the first order and other higher-order theories. Numerical results were presented for fiber-reinforced laminates, which show the effects of ply orientation, number of layers, side-toithickness ratio, and aspects ratio.