• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.40 no.6
• /
• pp.408-420
• /
• 2003

This paper describes a Delay Locked Loop (DLL) circuit having two advancements : 1) a dual loop operation for a wide lock-range and 2) programmable replica delays using antifuse circuitry and internal voltage generator for a post-package skew calibration. The dual loop operation uses information from the initial time-difference between reference clock and internal clock to select one of the differential internal loops. This increases the lock-range of the DLL to the lower frequency. In addition, incorporation with the programmable replica delay using antifuse circuitry and internal voltage generator allows for the elimination of skews between external clock and internal clock that occur from on and off-chip variations after the package process. The proposed DLL, fabricated on 0.16m process, operates over the wide range of 42MHz - 400MHz with 2.3v power supply. The measured results show 43psec peak-to-peak jitter and 4.71psec ms jitter consuming 52㎽ at 400MHz.

• Journal of radiological science and technology
• /
• v.28 no.4
• /
• pp.301-306
• /
• 2005

Purpose : The goal of this study was to survey the quality control of mammographic phantom images in some area. Methods : Between May and June, 2005, I have got a total of 47 mammographic phantom images collected from 49 hospitals and were analized about phantom score of fibrous, speck, tumor with enlargement scope. By critic level of experimental mammographic phantom case images, classified through the pass case that fibrous score 4, speck score 3, tumor score 3 over. Result : It passed 33case (70.3%), failed 14 case (29.7%) about 47 case. Passing case images showed tube voltage $23{\sim}30\;kVp$, tube current $20{\sim}60\;mAs$, photographic density $0.48{\sim}1.77$ Conclusion : It passed case about 70.3% of mammographic phantom image in some area. Optimum range of tube voltage, tube current, photographic density have to use to get fine quality of mammographic images.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.40 no.2
• /
• pp.171-177
• /
• 2012

In this paper, we proposed a algorithm and an operation boundary for fault detection of a onboard GNSS receiver. After aircraft exchange corrections computed by an aircraft receiver, a faulty aircraft receiver is detected by checking consistency of correction. For this purpose, PRC residual is used as the test statistic for fault detection of the onboard GNSS receiver. And operation boundaries are set by using DGPS position error increase with respect to the distance from a reference station. If the fault detection is performed by using aircraft only in operation boundary, the more accurate fault detection can be possible.

• Geotechnical Engineering
• /
• v.13 no.4
• /
• pp.95-108
• /
• 1997

For normally consolidated clay, several researchers have developed a number of theoretical time factors to determine the coefficient of consolidation However, depending on the assumptions and analytical techniques, it could considerably vary even for a specific degree of consolidation. In this paper, a method is proposed to determine a consistent coefficient of consolidation over all ranges of degree of consolidation by applying the concept of the Optimum Design Technique. The initial excess pore pressure distribution is assumed to be obtainable by the successive spherical cavity expansion theory. The dissipation of pore pressure is simulated by means of two dimensional linear-uncoupled axisymmetric consolidation analysis. The minimization of the differences between the measured and the predicted excess pore pressures was carried by BFGS unconstrained optimum design algorithm with one dimensional golden section search technique. By analyzing numerical and real field examples, it can be found that the adopted optimum technique gives a consistent and convergent results.

• The Journal of the Acoustical Society of Korea
• /
• v.24 no.3
• /
• pp.178-185
• /
• 2005

This paper presents a new music identification method using probabilistic and dynamic characteristics of melody. The propo3ed method uses pitch and MFCC parameters as feature vectors for the characteristics of music notes and represents melody pattern by pitch histogram and temporal sequence of codeword indices. We also propose a new pattern matching method for the hybrid method. We have tested the proposed algorithm in small (drama OST) and broad (1.005 popular songs) search spaces. The experimental results on search areas of OST and 1,005 popular songs showed better performance of the proposed method over conventional methods. We achieved the performance improvement of average $9.9\%$ and $10.2\%$ in error reduction rate on each search area.

• Korean Journal of Optics and Photonics
• /
• v.17 no.6
• /
• pp.537-543
• /
• 2006

A method of estimating the distance using single zoom camera limits a distance range(only optical axis) in field of view. So, in this paper, we propose a method of estimating the distance information in Stereoscopic display using the stereo zoom lens module for estimating the distance in the wide range. The binocular stereo zoom lens system is composed using a horizontal moving camera module. The left and right images are acquired in polarized stereo monitor for getting the conversion and estimating a distance. The error distance is under 10mm which has difference between optically a traced distance and an estimated distance in left and right range $(0mm{\sim}500mm)$ at center. This presents the system using a function of the zoom and conversion has more precise distance information than that of conversion control. Also, a method of estimating a distance from horizontal moving camera is more precise value than that from toe-in camera by comparing the error distance of the two camera methods.

• Nuclear Engineering and Technology
• /
• v.21 no.2
• /
• pp.73-88
• /
• 1989

Ten methods of the total two-phase pressure drop prediction based on five existing models and correlations have been examined for their accuracy and applicability to pressurized water reactor conditions. These methods were tested against 209 experimental data of local and bulk boiling conditions : Each correlations were evaluated for different ranges of pressure, mass velocity and Quality, and best performing models were identified for each data subsets. A computer code entitled 'K-TWOPD' has been developed to calculate the total two-phase pressure drop using the best performing existing correlations for a specific property range and a correction factor to compensate for the predicted error of the selected correlations. Assessment of this code shows that the present method fits all the available data within $\pm$11% at a 95% confidence level compared with $\pm$25%, for the existing correlations.

• Proceedings of the KIPE Conference
• /
• 2017.11a
• /
• pp.37-38
• /
• 2017

본 논문에서는 승압형 PFC 컨버터를 사용하고 풀브리지-하프브리지 제어를 적용한 넓은 결합계수 범위에서 동작하는 2-stage 자기유도방식 무선전력전송 시스템의 설계 방법을 제안한다. 결합계수, 출력전압 범위 및 bridgeless 정류기의 최대 승압비를 고려하여 풀브리지-하프브리지 동작 영역과 승압형 PFC 컨버터의 DC link 전압 범위를 설계한다. 설계 결과를 기존 시스템과 비교하고 시뮬레이션을 통하여 이를 검증한다.

• Journal of the Korean Society of Physical Medicine
• /
• v.4 no.1
• /
• pp.57-62
• /
• 2009

목적 : 이 연구의 목적은 스트레칭이 노인의 경부 통증과 관절가동범위에 미치는 영향을 알아보는데 있다. 방법 : 치료에 따른 전, 후 경추 굴곡 신전 패턴을 이용한 스트레칭이 목의 관절가동범위 변화와 통증변화에 미치는 영향을 알아보기 위해 20명(남자 10명, 여자 10명)을 대상으로 치료 전, 치료 4주 후에 얻은 측정치를 대응 t-검정을 사용하여 분석하였다. 결과 : 치료 4주후 통증수치, 경추 관절 굴곡, 신전, 좌회전, 우회전 변화는 유의한 감소를 보였다. 결론 : 스트레칭이 노인 경부근막동통증후군 환자의 관절가동범위 증가와 통증 감소에 효과적이라는 것을 확인하였다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.15 no.3
• /
• pp.916-923
• /
• 1991

본 연구에서는 표면 균열이 있는 평판의 탄소성 피로하중 상태에서 성장하는 균열 형태의 변화와, 작용하는 응력의 크기에 따른 균열 개페구 특성의 변화를 연구하 였다.또, 유효 응력 확대계수 범위, .DELTA.K$_{eff}$와 J적분범위, .DELTA.J가 탄소성 응력 상태에서의 표면 피로균열 진전속도를 나타내는 역학양으로 사용되는데 따른 적합성등 을 검토하였다.