• Journal of the Korea Concrete Institute
• /
• v.15 no.6
• /
• pp.794-801
• /
• 2003

As it is important to measure the degree of the deterioration and predict service life caused by chloride in concrete structure the methods of measuring chloride in the concrete is raised important problems. This study is to set a new standard for using of the colorimetric method through grasping the character of the colorimetric distinction method, and measuring the chloride content at the place discolored. Also, to predict chloride content around embeded bar and time reaching limit chloride concentration through measuring the chloride content of concrete surface by colorimetric distinction method and this study presents the new concept of concrete degradation and diagnosis of the durability by salt damage. According the results, it is possible to use colorimetric distinction method as simplified measurement to measure the fixed quantity of the chloride concentration. What is more, it would make calculation of concrete surface chloride had a wide fluctuation at the general environment extended. Also, it would be make estimating durability of reinforced concrete structures applied to the basic data.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2008.11a
• /
• pp.868-871
• /
• 2008

Remodeling is an architectural activity that transforms the existing state of specific building which has been aged and clichedinto new state overcoming those aged and cliched state. Remodeling can be a means to increase building's physical lifecycle and also a countermeasure to cope with the changes in use that are from social demand, use and technical development. The performance evaluation on the remodeling tenement shall be done by understanding the performance and state of the building before and after remodeling and then it shall represent the improvement in performance objectively by comparing the differences before and after remodeling. In this aspect, we performed basic research to conduct performance evaluation on the remodeling tenement by comparing and analyzing the performance evaluation and performance certificate systems of Korea and Japan in order to suggest objective evaluation system on the change of tenement building before and after remodeling.

• Journal of the Korean Geotechnical Society
• /
• v.27 no.1
• /
• pp.65-76
• /
• 2011

This paper presents the results of a numerical investigation on the long-term behavior of geosynthetic reinforced soil abutment. The investigation was carried out aiming at identifying the governing mechanisms of the long-term deformation of geosynthetic-reinforced soil abutment subjected to sustained loads during service life. A numerical modeling strategy was first established using the Singh-Mitchell creep model and the power law model, respectively, for the backfill and the geosyntehtic reinforcement. A parametric study on the creep properties of the backfill and the geosynthetic reinforcement was then conducted. The results indicated that a geosynthetic reinforced soil structure backfilled with marginal soil may exhibit substantial long-term deformation due to the creep effects caused by both the backfill soil and the geosynthetic reinforcement, the magnitude of which depends largely on the creep properties. This paper highlights the importance of considering the creep effect on load supporting geosynthetic reinforced soil structures when the long-term serviceability requirement is of prime importance.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.25 no.1
• /
• pp.122-129
• /
• 2019

Due to its nature the manufacturing industry faces a cyclical economy, and therefore there is an urgent need for a companion industry to cope with this cyclic pattern in the long run. The sector suitable for meeting this demand is the repair and shipbuilding industry. In order to operate a shipbuilding repair business, a floating dock is indispensable, and most obsolete floating docks were imported from overseas and operated through repair/maintenance. However, there is no precise guideline for floating dock safety, and most models have been in use for at least 30 years without being required to enter classification at the time of operation. In this study, structural strength analysis was carried out using measured thickness information of aged floating docks, and the residual structural strength of floating docks in operation was analyzed. The main results derived from this study can be referred to as guidelines for the review of the structural safety of similar equipment, and it is expected that an optimal solution will be found within a short time using this method for repair/maintenance.

• The Journal of the Convergence on Culture Technology
• /
• v.7 no.4
• /
• pp.727-734
• /
• 2021

The purpose of this study is to analyze the perception of the residents of the new city by examining the consciousness of the occupants to understand the characteristics of the residents of the city of Bundang. As a result of evaluating and analyzing the durability by visual inspection and some equipment tests at the site of the on-site investigation, it was found that there is a problem with the quality, and continuous maintenance is required to improve the durability and usability of the apartment house. In particular, many cracks appearing in the rapidly deteriorated part should be repaired promptly, and a systematic plan should be formulated and carried out. In the apartment housing perception survey of Bundang new city residents, about 93.4% showed above-average satisfaction, and 43.4% showed a favorable preference toward the residential area.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.5B
• /
• pp.557-562
• /
• 2006

In order to predict the dispersion of suspended sediment arising from dredging operation in port and navigation channel, a hybrid model for dispersive transport of turbidity plume was developed using Lee's(1998) hybrid method. Using hybrid modeling scheme advection-diffusion equation was solved by the forward particle-tracking method for advection process and by the fixed Eulerian grid method for diffusion process. To examine numerical model simulation in accuracy, the simulated results for 1-D, 2-D, and 3-D cases were compared with the analytical solutions including Kuo, et al's (1985) 3-D mathematical model. The model results were in a good agreement with the analytical solutions and mathematical model for the dispersion of turbidity plume.

• Korean journal of food and cookery science
• /
• v.13 no.2
• /
• pp.204-212
• /
• 1997

The characteristics of sponge cakes prepared with replacement of 30, 50, 75, or 100% of sucrose with isomaltooligosaccharide (IOS), fructooligosanharide (FOS), maltitol symp (MS), or maltitol powder (MP), were examined through physical measurement and sensory evaluation. The specific gravities of foams and cake batters were not significantly different among samples (p .0.05). The use of IOS increased the viscosity of cake batter. The cakes containing IOS, FOS, MS, or MP were softer than control cakes (sucrose 100%). Especially cakes prepared with 30, 50％ IOS, or 75, 100％ MP, appeared to be fragile. When increasing levels of IOS or FOS were incorporated in the cake formula, cake crust color was getting darker than that of control cake, whereas cake containing maltitol was getting lighter as the levels of replacement increased. Generally, the volume of cake containing FOS were superior to that of control cake, whereas those of cakes containing above 50% MP were inferior. Sensory analysis of experimental cakes did not show significant differences from the control cake for softness, springiness and gumminess. Sweetness increased replacing the sucrose with FOS, MS or MP (30, 50%) and moistness increased using IOS, FOS, MS, or MP without agreement with moisture contents of cakes. Replacement of 30, 50% sucrose with MS or 30％ with MP did not affect greatly the physical measurements or sensory characteristics studied.

• Journal of Conservation Science
• /
• v.33 no.6
• /
• pp.431-442
• /
• 2017

The purpose of this study is to reveal that coloring status and the degree of damage and the kinds of pigments used in large buddhist painting (Gwaebultaeng) of Tongdosa temple using a scientific analysis methods. It was observed that the physical damage patterns of the Gwaebultaeng were folding, lifting, fading, and peeling. Lead red, cinnabar and organic pigments were used as red pigments. Malachite and atacamite were used as green pigments, azulite and lazulite were blue pigments, lead white and talc were white pigment. It is estimated that overlapping organic pigments on the lead white were used as the yellow pigment and carbon was the black pigment. Through the analysis of the particle status of the pigments, it was confirmed that different types of raw materials were used for the green pigment, and the crystal form was easily distinguishable. Also, the dark blue color and the light blue color differed from each other depending on the size and shape of the raw material particles. Yellow and purple colors were organic pigments which did not have a graininess. The yellow and purple colors were organic pigments free from the graininess, and the pigments of dark red pigments was found to be mixed with the orange color pigments and carbon particles.

• Journal of Korean Society of Forest Science
• /
• v.29 no.1
• /
• pp.1-19
• /
• 1976

This study has been made to make an observation regarding present status of the coal mine props which is desperately needed for coal production, despite of great shortage of the timber resources in this country, and investigate the effects of diffusion process on the decay resistances of the mine props as applied preservatives of Malenit and chromated zinc chloride. The results are as follows. 1. Present status of the coal mine props Total demand of coal mine props in the year of 1975 was approximately 456 thousand cubic meters. The main species used for mine props are conifer (mainly Pinus densiflora) and hardwood (mainly Quercus). Portions between them are half and half. With non fixed specification, wide varieties of timber in size and form are used. And volume of wood used per ton-of coal production shows also wide range from 0.017 cubic meter to 0.03 cubic meter. 2. Decay resistance test a) The oven dry weight decreased between untreated specimen and treated specimen has not shown any significantly, although it has shown some differences in average values between them. It may be caused by the shorter length of the test. b) The strength of compression test between untreated specimen and treated specimen has also shown the same results as shown in case of weight decrease. Reasons assumed are the same. c) The amounts of the extractives in one percent of sodium hydroxide (NaOH) between untreated and treated specimen have shown the large value in case of untreated specimen than that of treated. 3. The economical benifit between untreated and treated wood when applied in field has seen better in long term base in case of treated wood, although the primary cost of treated wood add a little bit more cost than that of the untreated wood.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.28 no.1
• /
• pp.102-112
• /
• 2010

By understanding physiological characters of plants and the environment, plant design should decide the relationship with other plants from the designer's curiosity of the plant's color, texture, form and other aspects. There are a traditional tendency that many designers put the plant's color ahead of other aspects. This study explores 4 gardens of Gertrude Jekyll's Munstead Wood, Vita Sackvill-West's Sissinghurst, Christopher Lloyd's Grest Dixter and Lawrence Johnston's Hidcote Manner. The flower border of Munstead is started with light grey and blue at the edge and it gets stronger colors like red and orange as the line comes to the middle. It is noticeable that white an blue colors were used unlike before. Sissinghurst made use of purple color which was very seldom used before and Dixter added orange to magenta color that was already there, giving a strong visual effect and through juxtaposition it could realize the wanted effect. A strong red border line was created in Hidcote Manner. Above mentioned designers arranged various colors so that visitors can experience different spacial senses according to observer's direction. In the cognitive space the main color and the secondary color arranged leading to the fact that the observer recognizes it as a whole. In plant design time means seasonal performance which influences the main color arrangement like gradation or contrast. Moreover, space determines the color's zone when it comes to plant design.