• Journal of the Society of Naval Architects of Korea
• /
• v.29 no.4
• /
• pp.114-131
• /
• 1992

In the present work, a two-dimensional boundary-value problem for a large amplitude motion is treated as an initial-value problem by satisfying the exact body-boundary and nonlinear free-surface boundary conditions. The present nonlinear numerical scheme is similar to that described by Vinje and Brevig(1981) who utilized the Cauchy's theorem and assumed the periodicity in the horizontal coordinate. In the present thesis, however, the periodicity in the horizontal coordinate is not assumed. Thus the present method can treat more realistic problems, which allow radiating waves to infinities. In the present method of solution, the original infinite fluid domain, is divided into two subdomains ; ie the inner and outer subdomains which are a local nonlinear subdomain and the truncated infinite linear subdomain, respectively. By imposing an appropriate matching condition, the computation is carried out only in the inner domain which includes the body. Here we adopt the nonlinear scheme of Vinje & Brevig only in the inner domain and respresent the solution in the truncated infinite subdomains by distributing the time-dependent Green function on the matching boundaries. The matching condition is that the velocity potential and stream function are required to be continuous across the matching boundary. In the computations we used, if necessary, a regriding algorithm on the free surface which could give converged stable solutions successfully even for the breaking waves. In harmonic oscillation problem, each harmonic component and time-mean force are obtained by the Fourier transform of the computed forces in the time domain. The numerical calculations are made for the following problems. $\cdot$ Forced harmonic large-amplitude oscillation(${\omega}{\neq}0,\;U=0$) $\cdot$ Translation with a uniform speed(${\omega}=0,\;U{\neq}0$) The computed results are compared with available experimental data and other analytical results.

• Journal of Korean Society of Transportation
• /
• v.31 no.1
• /
• pp.65-76
• /
• 2013

Traffic accidents at signalized intersections have been increased annually so that it is required to examine the causation to reduce the accidents. However, the current existing accident models were developed mainly by using non-linear regression models such as Poisson methods. These non-linear regression methods lack to reveal the complicated causation for traffic accidents, though they are the right choice to study randomness and non-linearity of accidents. Therefore, it is required to utilize another statistical method to make up for the lack of the non-linear regression methods. This study developed accident prediction models for 4 legged signalized intersections with Poisson methods and compared them with structural equation models. This study used structural equation methods to reveal the complicated causation of traffic accidents, because the structural equation method has merits to explain more causational factors for accidents than others.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.17 no.1
• /
• pp.136-142
• /
• 2007

This paper proposes a new approach on nonlinear maneuvering target tracking. In this paper, proposed algorithm is the Kalman filter based on the adaptive interactive multiple model using the concept of predicted impact point and utilize modified Kalman filter regarding the error between measurement position and predicted impact point. The unknown target acceleration is regarded as an additional process noise to the target model, and each sub-model is characterized in accordance with the valiance of the overall process noise which is obtained on the basis of each acceleration interval. To compensate the decreasing performance of Kalman filter in nonlinear maneuver, we construct optional algorithm to utilize proposed method or Kalman filter selectively. To effectively estimate the acceleration during the target maneuvering, the rapid increase of the noise scale is recognized as the acceleration to be used in maneuvering target's movement equation. And a few examples are presented to show suggested algorithm's executional potential.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.44 no.1
• /
• pp.1-11
• /
• 2016

The information about the deformations of high-aspect-ratio wings is needed for the real-time monitoring of structural responses. Wing deformation in flight can be predicted by using relationship between the curvatures and the strains on the wing skin. It is also necessary to consider geometric nonlinearity when the large deformation of wing is occurred. The strain distribution on fixed-end is complex in the chordwise direction because of the geometric shape of fixed-wings on fuselages. Hence, the wing displacement can be diversely predicted by the location of the strain sensing lines in the chordwise direction. We conducted a study about prediction method of displacements regardless of the chordwise strain sensing locations. To correct spanwise strains, the ratio of spanwise strain to chordwise strain, Poisson's ratio, and the ratio of the plate strain to the beam strain were used. The predicted displacements using the strain correction were consistent with those calculated by the FEA and verified through the bending testing.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2011.04a
• /
• pp.602-605
• /
• 2011

본 논문에서는 마찰감쇠기가 설치된 건물이 붕괴하중을 받을 때의 에너지소산능력을 고려하여 등가감쇠비를 유도하였다. 마찰감쇠기는 주로 지진과 같은 수평하중에 대한 에너지를 소산하기위해 설치된다. 마찰감쇠기를 대각 가새형으로 설치하면 수평하중에 대한 저항력뿐 만아니라 수직하중에 대한 저항성능도 발휘된다. 건물에 설치된 마찰감쇠기는 외력의 크기에 따라 정지와 운동의 상태를 반복하여 외부 입력에너지를 소산시키기 때문에 외력과 응답관계가 비선형이다. 건물은 고유의 점성감쇠를 가지므로 마찰감쇠기가 설치된 건물은 마찰과 점성감쇠를 동시에 고려해야하므로 해석적인 정해를 구하기가 어렵다. 에너지 평형을 이용하여 등가감쇠비를 구하고 운동방정식을 등가선형화하면 쉽게 저항 성능을 파악할 수 있다. 우선 건물에 영향을 미치는 것은 감쇠이므로 감쇠의 영향력을 마찰력비, ${\gamma}_c$로 나타내었다. 둘째, 정해를 마찰력비로 표현하여 유도하고 응답특성을 파악하였다. 셋째, 에너지 균형식을 통해 등가감쇠비를 산정하였다. 마지막으로 등가감쇠비를 검증하기 위하여 등가감쇠비를 이용하여 등가선형화한 응답과 실제 마찰감쇠기를 설치하여 비선형 수치해석한 결과와 비교, 검증하였다.

• Journal of Korean Society for Geospatial Information Science
• /
• v.5 no.2 s.10
• /
• pp.29-43
• /
• 1997

An integrated optimal control modelhas been formulated to address dynamic freeway diversion control process. The purpose of this paper is to develop an effective and efficient approach for simultaneous]v solving optimal control measures, including on-ramp metering rates, off-ramp diversion rates, and g/C ratios for traffic signals, on a real-time basis. By approximating the flow-density relation with a two-segment linear function, the non-linear optimal control problem can be simplified into a set of piece-wised linear programming models and solved with the proposed SLP algorithm. consequently, an effective on-line feedback method has been developed for integrated freeway corridor control in the framework of the ITS

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.1A
• /
• pp.79-87
• /
• 2008

This paper investigates the in-plane stability of fixed shallow arches. The shape of the arches is parabolic and the uniformly distributed load is used in the study. The nonlinear governing equilibrium equation of the general arch is adopted to derive the incremental form of the load-displacement relationship and the buckling load of the fixed shallow arches. From the results, it is found that buckling modes (symmetric or asymmetric) of the arches are closely related to the dimensionless rise H, which is the function of slenderness ratio and the rise to span ratio of such arches. Moreover, the threshold of different buckling modes and buckling load for fixed shallow arches are proposed. A series of finite element analysis are conducted and then compared with proposed ones. From the comparative study, the proposed formula provides the good prediction of the buckling load of fixed shallow arches.

• Electrical & Electronic Materials
• /
• v.6 no.6
• /
• pp.565-572
• /
• 1993

LPE(liquid phase epiraxy)법으로 성장시킨 $Al_{x}$ Ga$_{1-x}$As (0.15.leq.x.leq.0.67) 에피층의 구조적 특성을 이중결정 X-선 회절장치를 사용하여 조사하였다. GaAs기판과 $Al_{x}$ Ga$_{1-x}$As 에피층의 격자상수 차이로 인해 피이크가 분리되었고 이는 조성비가 증가함에 따라 선형적으로 증가하였다. 그리고 조성비는 Vegard의 법칙으로 구한 값과 기판 및 에피층 피이크 사이 각도분리(.DELTA..theta.)를 측정함으로써 구한 값이 일치하였으며 이때 관계식은 .DELTA..theta.=354.x을 얻었다. 또한 성장된 에피층은 compressive stress를 받고 있으며 조성비(x)가 0.15에서 0.67로 증가함에 따라 응력은 증가하였으며 그리고 피이크의 반치폭으로 부터 계산된 전위밀도가 역시 증가하였다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2016.05a
• /
• pp.358-358
• /
• 2016

본 연구에 앞서 가뭄에 따른 충청남도 서부권의 물 부족을 해결하기 위하여 금강 본류로부터 보령댐으로 일정 유량을 도수(diversion)하는 계획이 금강 본류에 미치는 수리적 영향을 1차원 비정상류 해석(unsteady flow analysis)을 통하여 분석하였으며, 본 연구에서는 수리모형 결과와 연계하여 수질 모형을 구축하여 금강 본류 수질에 미치는 영향을 알아보고자 하였다. 조위 영향에 따른 염도의 역류 모의를 위하여 전자해도와 위성영상자료를 활용하여 금강 하굿둑에서 외해 방향으로 약 9km에 이르는 모의 구간을 확장하였으며, 상류단의 진두수위표를 포함한 8개 지천의 유입유량 및 수질, 하구의 조위와 염도, 농공용수 취수시설의 취수량 및 회귀수 수질, 금강 배수갑문 운영, 대상 구간에 인접한 기상대의 기상자료 등을 고려하고 금강 본류를 따라 9개 수질측정소의 수질자료를 이용하여 모형의 보정을 실시하였다. 또한 대상 구간 내 2015년의 갈수기 유황 분석을 토대로 비선형 회귀분석식을 도출하여 2016년 갈수기 예측 유량과 함께 수질-유량 관계식을 도출하여 대상 구간의 수온, 염도, 용존산소(DO), BOD, 조류 등 영향을 분석하였다. 수온 분석 결과, 지점에 따라 2015년 유황 대비 평균 수온 1.79~3.83도, 최고 수온 1.74~4.30도 상승할 것으로 모의되었으며, 염도는 2016년 갈수기 동안의 금강 하굿둑 외해 염도는 담수 방류량의 감소로 전년 동기 대비 평균 53% 증가하는 것으로 모의되어 기수역 생태계에 상당한 영향을 줄 것으로 분석되었으며, 갈수기 동안의 금강 하굿둑 내수의 염도는 배수갑문 개방 빈도, 개방 시간, 개방 정도의 감소에 따른 해수 역류의 감소로 전년 동기 대비 크게 감소할 것으로 모의되었다. 용존산소는 2016년 갈수기 동안의 용존산소 농도는 지점에 따라 전년 동기 대비 평균 4~11% 감소하는 것으로 모의되었으며, 2016년 갈수기 동안의 BOD 농도는 지점에 따라 전년 동기 대비 평균 30~57% 증가하는 것으로 분석되었다. 조류는 지점에 따라 전년 동기 대비 평균 29~67% 증가하는 것으로 모의되었다. 유량의 감소에 따른 수온 증가 및 수질 악화의 영향이 있을 것으로 분석되나, 도수에 따른 영향은 상대적으로 제한적인 것으로 분석되었다.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.2 no.4
• /
• pp.11-22
• /
• 1998

An axisymmetric shell element which includes the effects of the meridional and circumferential cable prestresses is developed. It is coded for personal computer by the maximum use of axisymmetic properties and the dynamic analysis is performed under the seismic exitations. A ring element is used to fully utilize the characteristics of the axisymmetric shell. The eigenvalue solutions using 20 elements under the initial prestresses are in good agreement with the exact solutions. The results of the seismic analysis show that the radial deflection under the meridional prestress is a little larger than that under the circumferential prestress. The finite element model developed in this study can be very useful to the design applications.