• Korean Journal of Social Welfare
• /
• v.38
• /
• pp.284-308
• /
• 1999

This study is about the nationwide research concerning the degree and trends of marital conflict and instability. The research samples are 1,217 married. As the result of the research, the most conflict able issues in Korean couples are on the husband-wife relations, such as habitual differences, sharing in houseworks, conflicts in the role expectation, and the communication problems. In this study, We devide the marital relationships into 4 types (A, B, C, and D) in the view of the satisfaction & instability of marriage. First, the marriage with unsatisfaction and instability (A) was portioned 8.3%, and the satisfactory & stable type (D) was portioned 68.4%. It seems the marital relationships in Korea are relatively stable. However, the portion of type B-unsatisfactory, but stable couples-is 17.1% and the type C-satisfactory, but unstable marriage 6.2%. The result implies that the indication of marital instability should consider not only the divorce rate, but also the quality of marital relationships. In other words, the intervention for the conflict couples yet not divorce is needed. The differences of conflict areas among the relational types is not so much, but the degrees on conflicts are very serious. Especially, in the areas of marital conflict, love issues and personal value system affect the division of relational types of marriage most. It means the interaction factors are the most important variables about maintaining the marital relations with stable and satisfaction.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.24 no.12
• /
• pp.1646-1653
• /
• 2020

In case that the train driving with diverse high-speeds is manipulates by real-time remote control in long-term evolution-railway (LTE-R) system with frequent handovers, the real-time safe transmission of train control messages is important element. The handover delay time stability method regardless of train speed in order to enhance the real-time remote train control stability in LTE-R system is proposed in the paper. Furthermore, the variable speeds and altitudes of train collected by real measurements are applied for upgrading simulation accuracy. The simulation results inform that not only there are stable and unstable ranges to A3 offset values, but the optimal offset value for average handover delay is in unstable range. However, the late handover with A3 offset values in stable range should be chosen to get the predictable handover delay regardless of train speed rather than the early handover with A3 offset values in unstable range, since the key value of high-speed Korea railway system is the stability.

• Proceedings of the Korean Fiber Society Conference
• /
• 1998.04a
• /
• pp.50-53
• /
• 1998

코팅이나 접착제 분야에서 대기 중에서 불안정한 이소시아네이트기를 보호하기 위해 phenol, oxime, caprolactam계 화합물을 사용하는 봉지 방법을 본 연구에서 이용하고자 하였다. 선천적으로 위의 화합물들로 봉지된 이소시아네이트기는 결합쇄로 carbamate를 형성하나 이들은 열에 의해 특정 온도 영역에서 해리 되면서 다시 이소시아네이트기가 재 생성되는 과정을 거친다.(중략)

• Korean Journal of Microbiology
• /
• v.40 no.2
• /
• pp.65-72
• /
• 2004

Instability of some eukaryotic sequence propagated in prokaryotic hosts is a frequently observed phenomenon. It is well documented that long inverted repeats, AT-rich sequences with structures like Z-DNA are extremely unstable in E. coli. These sequences may either be under-represented or even lost when cloned in E. coli. When we analyzed the polymorphic pattern for several tandom repeat (TR) in human SCKI gene, we found some TR regions were frequently deleted from plasmids and had difficult problem for their sequencing. These regions may result in non-clonability of the DNA sequence. Here we have cloned two difficult TR regions under low temperature and made two library for DNA sequencing using a nebulizer or sonicator. This study will help to determine the unstable genomic elements in complex mammalian genome.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2009.05a
• /
• pp.263-266
• /
• 2009

The mainly objectives of this study was a combustion dynamics and instability characteristics in a model gas turbine dump combustor which is the scale down of GE 7FA+e DLN 2.6 gas turbine combustor. Model gas turbine injector has 2-stage swirl vane and it’s reduced 1/3 size of the original one. The shape of plenum and combustor were designed for similar acoustic characteristics. Inlet air was preheated to $200{\sim}400^{\circ}C$. The flow velocity at mixing nozzle was 30 to 75 m/s and equivalent ratio was 0.4 to 1.2. The combustor length was varied for different acoustic characteristics to $375{\sim}700\;mm$. As the result, this research have been show the combustion instability was observed at lower equivalence ratios ($\Phi$ < $0.5{\sim}0.6$) and higher equivalent ratios ($\Phi$ > $1.1{\sim}1.2$).

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2006.05a
• /
• pp.314-318
• /
• 2006

The interest on the detonation in small tubes, which can be applied to the ignition devices of propulsion system, is increasing. However, the propagation dynamics of detonation waves in small tubes has not been investigated clearly yet. In the present experiments, propagations of detonation waves in stoichiometric propane-oxygen mixture through transparent tubes were recorded using a high speed camera and average velocities were measured as well. In terms of average velocity, there exists a transition regime where the waves show smooth transition from the normal Chapman-Jouguet(CJ) detonation to the low velocity detonation$(\sim0.5V_{CJ})$ along the decreasing initial pressure. In this transition regime, the detonation waves are highly unstable and show cyclic or intermittent longitudinal velocity fluctuation.

• Proceedings of the Safety Management and Science Conference
• /
• 2009.04a
• /
• pp.93-104
• /
• 2009

본 연구는 직무 스트레스와 근골격계질환과의 관련성을 알아보기 위하여 단순작업과 반복 작업이 빈번하게 발생하는 전자제품 제조업에 대하여 고용 규모 30인 미만과 300인 이상의 사업장을 구분하여 실시하였다. 연구 대상자 311명은 근골격계질환 관련 자각증상과 한국인 직무 스트레스(KOSS)에 대해 설문 조사 방법을 이용하여 분석하였으며, 그 결과 한국인 직무스트레스(KOSS)영역에서 30인 이하의 사업장이 물리적환경, 직무요구, 직무자율성결여, 직무불안정, 조직체계, 보상부적절, 직장문화의 영역에서 불만족도가 300인 이상사업장에 비하여 스트레스가 높게 나타났다. 근골격계질환 관련 신체 부위별 증상자를 살펴보면 신체부위 목, 허리에 대한 증상 호소자가 가장 많은 것으로 나타났으며, 근로자들이 근무중 회사와의 갈등으로 격는 한국인 직무스트레스(KOSS)에서는 물리적환경, 직무요구, 직무자율성결여, 직무불안정, 조직체계, 보상부적절, 직장문화에 대하여 30인 미만 사업장 소속 근로자들의 스트 레스 노출정도가 높았다. 다만 KOSS부분에서 근로자들의 개인적인 성향을 나타내는 관계갈등부분은 약간의 차이로 300인 이상 고용사업장의 근로자에 대한 스트레스 노 출정도가 높았다. 이에 30인 미만 사업장과 같은 영세업종 근로자들에게 정신사회적 스트레스의 해소를 위한 예방 프로그램이 마련되어야 할 것이다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2009.11a
• /
• pp.236-241
• /
• 2009

To identify turbulent flow characteristics of non-reacting case resulted from cooling flow injection in a rectangular swirl combustor, 3D Large Eddy Simulation(LES) was implemented and Proper Orthogonal Decomposition(POD) analysis was used for post-processing. The combustor of concern is the LM6000, lean premixed dry low-NOx annular combustor, developed by GEAE. It was observed that increase in speed of shear layer resulted from the inflow of cooling flow caused intensified vorticity magnitude in central toroidal recirculation zone. In the case of vorticity magnitude in corner recirculation zone, however, was weakened. In addition, pressure fluctuation in combustor was damped down and longitudinal acoustic mode was significantly dissipated

• The Journal of Information Technology
• /
• v.5 no.4
• /
• pp.57-64
• /
• 2002

The system that is thermal test system for elements has been controlled generally by PID algorithm because of its characteristic. There is not a mathematical model for the system. So the system that is use the PID controller is not properly operated. To solve this problem, we propose a fuzzy algorithm that parameters and rule base is selected by self-searched algorithm for each system. The input fuzzy membership function is adapted based on the set stable range. Output membership function is nearly fixed but some parameter is adjustable. The rule base is changed under basis on the system response. The output value computed through inference and defuzzification is mapped into a value that is proper for the system operation. Through this regulation, it will be possible to prevent the temperature of system to go into the unstable temperature.

• Magazine of the Korea Concrete Institute
• /
• v.8 no.6
• /
• pp.205-212
• /
• 1996

This paper presents progressive fracture analysis of concrete using boundary element method and its stabilizing technique. To determine ultimate strength and to predict nonlinear behavior of concrete during progressive crack growth, the modelling of fracture process zone is done based on Dugdale-Barenblatt model with linear tension-softening curve. We regulate displacement and traction boundary integral equation of solids including crack boundary and analyze progressive fracture of concrete beam and compact tension specimen. Also a numerical technique which considers the growth of stress-free crack of concrete during the analysis and removes snapback of postpeak behavior is proposed.