• Journal of the Korean Geographical Society
• /
• v.30 no.4
• /
• pp.364-388
• /
• 1995

Even though rarely recognized as a separate approach, the institutional approach in geography is defined as an attempt to seek an explanation of the phenomena of geographical interest through focusing on the effects of institutional structure and actions. It can provide interdisciplinary links with other works and can offer complementary explanations for geographical interests. The concerns for institutions in geography can be found in early studies, the study of the state, the managerial approach, and the regulation approach. The Korean financial systems can provide good examples to apply institutional concepts into creating spatial outcomes, as it has been regarded as a useful tool to promote Korean economic development. Behind the current spatial pattern of financial systems, four different stages of institutional changes are identified in Korea. Each stage has different institutional features reflecting unique spatial implication.

• Journal of the Korean earth science society
• /
• v.39 no.2
• /
• pp.139-153
• /
• 2018

The sea surface wind field has long been obtained from satellite scatterometers or passive microwave radiometers. However, the importance of satellite altimeter-derived wind speed has seldom been addressed because of the outstanding capability of the scatterometers. Satellite altimeter requires the accurate wind speed data, measured simultaneously with sea surface height observations, to enhance the accuracy of sea surface height through the correction of sea state bias. This study validates the wind speeds from the satellite altimeters (GFO, Jason-1, Envisat, Jason-2, Cryosat-2, SARAL) and analyzes characteristics of errors. In total, 1504 matchup points were produced using the wind speed data of Ieodo Ocean Research Station (IORS) and of Korea Meteorological Administration (KMA) buoys at Marado and Oeyeondo stations for 10 years from December 2007 to May 2016. The altimeter wind speed showed a root mean square error (RMSE) of about $1.59m\;s^{-1}$ and a negative bias of $-0.35m\;s^{-1}$ with respect to the in-situ wind speed. Altimeter wind speeds showed characteristic biases that they were higher (lower) than in-situ wind speeds at low (high) wind speed ranges. Some tendency was found that the difference between the maximum and minimum value gradually increased with distance from the buoy stations. For the improvement of the accuracy of altimeter wind speed, an equation for correction was derived based on the characteristics of errors. In addition, the significance of altimeter wind speed on the estimation of sea surface height was addressed by presenting the effect of the corrected wind speeds on the sea state bias values of Jason-1.

• The Korean Journal of Financial Management
• /
• v.24 no.1
• /
• pp.29-58
• /
• 2007

We develop a model to estimate the value of growth opportunities, which is based on the seminal papers of M&M(1961, 1963) and Lee(2006). Making use of the estimation model, we estimate a new proxy variable of the growth opportunities, other than the usual proxy variables such as quasi Tobin's Q, MBR, and so on. The new proxy variable of growth opportunities can represent a necessary condition to identify whether the increase in new investments are successful or not. The empirical findings on the growth opportunities during the IMF currency crisis period and the post-IMF period are as follows; First, the overall success rate of new investments is as low as 50%, that means only half of the listed firms were increasing new investments when they had the growth opportunities. Second, during the crisis, one third of the listed firms were experiencing negative growth opportunities. However, during the post-IMF period, the growth opportunities on new investments were turned to be positive due to the turnaround efforts of listed firms. Third, the value of intangible assets, which are resulting from the investment of R&D and human capital, are becoming more important than ever. It seems to be true that larger portions of the value of growth opportunities are coming from the intangible assets, not from the increases in new investments of the physical assets.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.26 no.2
• /
• pp.365-376
• /
• 1999

The importance of finishing and polishing the restoration has been described by several authors. The final step provides for improved metallurgical properties, better marginal adaptation, reduced plaque accumulation. Unfortunately, finishing of the restorations can produce damage from temperature rises at the pulpal wall. The aim of this study was to determine the changes in temperature can be occurred during the use of finishing and polishing instruments under a variety of conditions. ; with or without a water coolant, intermittent or continuous operation, high or low rotation speed, remaining dentin thickness and various restorative materials. Class V preparations were cut on extracted molars and restored with composite resin(Z 100), resin-modified glass ionomer cements(Dyract, Fuji II LC), and amalgam. Finishing was done with aluminum oxide coated disc($Sof-lex^{(R)}$ polishing disc, 3M, USA). The following results were obtained. 1. The rise of temperature during polishing of amalgam restorations was the highest among the all experimental groups except polishing with water coolant(P<0.05). However, there were no statistical differences in temperature rises between Z 100, Dyract and Fuji II LC(P>0.05). 2. The intrapulpal temperature was greatly influenced by the applied time, and intermittent polishing was showed significantly lower temperature rises than continuous polishing(P<0.01). 3. The intrapulpal temperature was increased according to the application of polishing regard less of using water coolant. However, polishing with water coolant showed significantly lower temperature in the pulp than not used water coolant(P<0.01).

• Journal of the korean academy of Pediatric Dentistry
• /
• v.36 no.1
• /
• pp.62-70
• /
• 2009

The objective of this study was to measure the leaching of filler (Si, Ba) from nanofiller-contained composites (Palfique Estelite $sigma^{{R}}$ (Tokuyama Dental Corp., Tokyo, Japan), $Z-350^{{R}}$ (3M ESPE, USA), Ceram X duo $E3^{{R}}$, $D3^{{R}}$ (Dentsply, Konstanz, Germany)) under different conditions. The samples used for the study of leachable components were made by insertion of the material into a circular mold, 10 mm in diameter and 3.0 mm high. Each specimen was placed in a disposable polystyrene vial containing 5 mL of distilled water, artificial saliva or 0.1N NaOH and kept in an oven at $37^{\circ}C$. ; water and artificial saliva - 150 days, 0.1N NaOH - 15days. Inductively coupled plasma atomic emission spectroscopy (ICP-AES) was used to determine the amount of Si and Ba in the test solutions. 1. Filler leaching was significantly great in 0.1N NaOH among all samples(p<.0.001). 2. When samples were stored in the distilled water, Estelite showed the lowest amount of Si leaching. When samples were stored in the artificial saliva, Z-350 showed the lowest amount of Si leaching. 3. There were significant differences in filler leaching between 3 storage medias and composite resins(p<.0.001). 4. Si and Ba leaching occurred in greater proportion when samples were stored in the artificial saliva than distilled water. 5. There were significant interactions in monthly filler leaching between leaching in artificial saliva and in distilled water, as well as the interaction between storage medium and filler(p<.0001). These results indicate that a continuous filler leaching of nanofiller-contained composite resins was in storing aqueous solutions under over time.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.37 no.2
• /
• pp.233-239
• /
• 2010

Space loss of dental arch can appear when the proper position of teeth within the dental arch changes by a certain cause, because the balance of force makes changes about tooth position as well as alignment. The causes of space loss include proximal caries, early extraction, congenital missing of a tooth and hypodontia, etc. Among those causes of space loss, congenital missing of a tooth is more rarely observed in the primary dentition than in the permanent dentition. Congenital missing in the primary dentition is associated with that in the permanent dentition. Furthermore, it can cause space problem, such as mesial tilting or drift of adjacent teeth, space loss for permanent successors and dental arch constriction, etc. Primary lateral incisors is the most commonly involved, in the maxilla rather than in the mandible, but primary canine is rarely reported. In this patient, who visited the department of pediatric dentistry at Yonsei university dental hospital, it was observed that the maxillary right primary canine was congenitally missing and an odontoma was found insteadly. However, neither the space loss for the congenitally missing primary canine nor midline deviation is remarkable during the 2-year-10-month observation period. In addition, any clinical or radiographical symptom did not occur in spite of odontoma. Therefore, surgical enucleation of odontoma is planned according to the eruption of permanent lateral incisor or canine, unless eruption failure of permanent lateral incisor or canine nor cystic change around the odontoma is occurred. Through further evaluation, space maintainer or orthodontic treatment may be necessary.

• Journal of The Korean Association For Science Education
• /
• v.31 no.8
• /
• pp.1092-1109
• /
• 2011

The purpose of this study was to analyze of the effects of instructional supervision emphasizing reflective thinking on science teaching of elementary teachers. The participants in this study were two teachers. This study was divided in former, middle, and later periods, and consisted of monitoring their own teaching, interviewing, journal writing, discussion with peer teachers and teacher training. Data included descriptions of nine science classes, nine interviews, seven journals and the journals of the researcher. Data analysis tools were the frameworks of the questions, feedback, teaching methods, elements of teaching behavior, and reflection levels. This study employed qualitative research, analysis of the frequency of data, and quoting of descriptions related to the result. The results of this study were as follows: First, teachers showed mainly technical reflection, but changed to show more practical reflection, and critical reflection in the later period of instructional supervision. Second, instructional supervision emphasizing reflective thinking on science teaching for elementary teachers meaningfully changed the question, feedback, teaching methods and teaching elements of teachers. From the results of this study, instructional supervision emphasizing reflective thinking on science teaching for elementary teachers can be considered an effective method in improving teaching elementary science, and instructional supervision used in this study made possible the higher level of reflection and appropriate teaching behavior.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.29 no.1
• /
• pp.45-58
• /
• 2013

The purpose of this study was to analyze the area of occlusal contact points using visual method. One subject was selected who had Angle Class I, normal dentition, without dental caries, periodontal disease and temporomandibular disorders. Forty times PVS impressions were taken and 10 pairs casts were fabricated using dental super hard stone. After mounting the casts with customized loading apparatus, 78.9kg/f force was loaded as a maximum biting force. In T-Scan method, occlusal contact points measurement was repeated twice. Then, using Photoshop program (Adobe photoshop CS3, Adobe. San Jose, USA), the pixels which indicated occlusal contact points by color was recognized, and the distribution of recognized pixels were calculated to area. In Add picture method, polyether bite material applied to the occlusal surface of the casts. Then, the image of the translucent areas was recorded and classified $0{\sim}10{\mu}m$, $0{\sim}30{\mu}m$, $0{\sim}60{\mu}m$ area by the amount of transmitted light. To acquire occlusal surface, the numbers of pixels from the photograph of the contact area indicated cast converted to $mm^2$. The mean occlusal contact area by two methods was statistically analyzed (paired t-test). Part of the red and pink area in T-Scan image were almost equivalent to the $0{\sim}10{\mu}m$, $0{\sim}30{\mu}m$, $0{\sim}60{\mu}m$ area in Add picture image. The distribution of occlusal contact points were similar, but the average area of occlusal contact points was wider in T-scan image (P<.05). Pink and red area in T-scan image was wider than $0{\sim}10{\mu}m$, $0{\sim}30{\mu}m$ area in Add picture image (P<.05), but similar to $0{\sim}60{\mu}m$area in Add picture image (P>.05). Occlusal contact points in T-scan image did not indicate real occlusal contact points. Occlusal contact areas in T-scan method were enlarged results comparing with those in Add picture method.

• Tuberculosis and Respiratory Diseases
• /
• v.53 no.1
• /
• pp.27-35
• /
• 2002

Background : The paradoxical response refers to an enlargement of old lesions or unexpected new ones during apparently adequate antituberculous therapy. This response has been reported in cases of intracranial tuberculoma, tuberculous lymphadenopathy, tuberculous pleurisy and pulmonary tuberculosis. However, there are few reports on its frequency and clinical characteristics. Materials and Methods : This study enrolled 205 patients who were treated with first line antituberculous agents for more than 6 months. We retrospectively studied 155 patients with pulmonary tuberculosis and 57 patients with pleural tuberculosis (7 patients had both) from July 1998 to March 2000. The patients were divided into the paradoxical response group and the non-paradoxical group. The clinical characteristics of the paradoxical response group and the non-paradoxical group. The clinical characteristics of the paradoxical group were investigated. Statistical analysis was done with an independent sample T-test and Chi-squared test. Results : 29 of the 205 patients(14.1%) had paradoxical response. Among the 29 patients, there were 19 pulmonary tuberculosis, 8 tuberculous pleurisy(2 patients had both). Paradoxical response appeared 32 days (mean 35 days in pulmonary tuberculosis, mean 25 days in tuberculous pleurisy) after the beginning of chemotherapy. The duration to regress less than half of initial chest lesion was 114 days in pulmonary tuberculosis and 124 days in tuberculous pleurisy, respectively. Most common clinical manifestation of paradoxical response patients was coughing in both pulmonary tuberculosis and tuberculous pleurisy. Male sex, high blood WBC count and high level of pleural fluid LDH were related with paradoxical response. Conclusion : These findings suggest that presponse usually appears 1 month and disappears within 4 months after the beginning of anti-tuberculous chemotherapy. Paradoxical response was relatively correlated with male sex, high blood WBC count and high level of pleural fluid LDH.

• Tuberculosis and Respiratory Diseases
• /
• v.48 no.2
• /
• pp.155-165
• /
• 2000

Background: The phagolysosomal function of alveolar macrophage against M. tuberculosis infection is influenced by Nramp1, which is encoded by the NRAMP1 gene. There are several genetic polymorphisms in NRAMP1, and these polymorphisms affect the innate host resistance through the defect in production and function of Nramp1. To investigate this relationship, the NRAMP1 genetic polymorphism in patients with primary tuberculous pleurisy was determined. Methods: Fifty-six primary tuberculous pleurisy patient, who were diagnosed by pleural biopsy, were designated to the pleurisy group and 45 healthy adults were designated to the healthy control group. Three genetic polymorphisms of NRAMP1, such as a single point mutation in intron 4(469+14G/C, INT4), a nonconservative single-base substitution at codon 543 that changes aspartic acid to asparagine(D543N) and a TGTG deletion in the 3' untranslated region(1729+55delI4, 3'UTR), were determined. Polymerase chain reaction(PCR) and polymerase chain reaction-restriction fragment length polymorphism(PCR-RFLP) were used. Results: The frequencies of mutant genotypes of INT4 and 3'UTR were significantly high in pleurisy group(p=0.001, p=0.023). But the frequencies of D543N were not significantly different between the two groups(p=0.079). The odds ratios, which are a comparison with wild genotype for determining mutant genotypes, were 8. 022(95% confidence interval=2.422-26.572) for INT4 and 5.733(95% confidence interval = 1.137~28.916) for 3'UTR ; these were statistically significant But the ratio for D543N was not significant In the combined analysis of the INT4 and 3'UTR polymorphisms, the odds ratios were 6.000(95% confidence interval = 1.461~24.640) for GC/++ genotype and 14.000(95% confidence interval=1.610~121.754) for GC/+del when compared with GG/++ homozygotes ; these were statistically significant. Conclusion: Among the NRAMP1 genetic polymorphisms, a single point mutation in intron 4(469+14G/C, INT4) and a TGTG deletion in the 3' untranslated region(1729+55del4, 3'UTR) were closely related to the primary tuberculous pleurisy.