• Title/Summary/Keyword: 버스트

Search Result 357, Processing Time 0.028 seconds

A Study on the Implementation of DS/SS Power Line Communication System for Burst-Format Data Transmission (버스트형 데이터 전송을 위한 DS/SS 전력선 통신시스템의 실현에 관한 연구)

  • 강병권;이재경;신광영;황금찬
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.16 no.11
    • /
    • pp.1054-1062
    • /
    • 1991
  • In this paper a communication system using direct sequence spread spectrum (DS/SS) technique is constructed to transmit burst format data over power line channel with impulsive noise and narrowband interferences. Fast code synchronization is acquired by digital matched filter and data decision is accomplished by sampling pulses. In order to examine the performance of the power line communication system, but error rate and packet loss rate are measured over the simulation channel with various noise sources. When the packet composed of 1-bit preamble and 63-bit data is transmitted under very high burst impulsive noise, the bit error rate is about 10$^3$-10$^4$ and the packet loss rate is below 0.07.

  • PDF

Burst Mode Symbol Timing Recovery for VDL Mode-2 (VDL Mode-2에 적용 가능한 버스트 모드 심벌 타이밍 복원기)

  • Gim, Jong-Man;Choi, Seung-Duk;Eun, Chang-Soo
    • Journal of Advanced Navigation Technology
    • /
    • v.13 no.3
    • /
    • pp.337-343
    • /
    • 2009
  • In this paper, we proposed a burst mode symbol timing recovery unit that is applicable to the VDL Mode-2 using D8PSK modulation. A method that IIR loop filter is used to minimize symbol timing error is hard to apply to burst mode because its convergence time is long. That is, the fast convergence property is important. In this paper, the proposed method takes one sample which has maximum symbol power after the initial synchronization has been achieved by using preambles. The main principle of operation is that the unit moves one sample clock to advance or retard according to symbol power. We verify that the proposed method is operated well in ${\pm}100$ ppm or greater through the test results between Australia ADS Corp. transmitter and the designed receiver.

  • PDF

An Automatic Power Control Circuit suitable for High Speed Burst-mode optical transmitters (고속 버스트 모드 광 송신기에 적합한 자동 전력 제어 회로)

  • Ki, Hyeon-Cheol
    • Journal of the Institute of Electronics Engineers of Korea SD
    • /
    • v.43 no.11 s.353
    • /
    • pp.98-104
    • /
    • 2006
  • The conventional burst-mode APC(Automatic Power Control) circuit had an effective structure that was suitable for a low power consumption and a monolithic chip. However, as data rate was increased, it caused errors due to the effect of the zero density. In this paper, we invented a new structured peak-comparator which could compensate the unbalance of the injected currents using double gated MOS and MOS diode. And we proposed a new burst-mode APC adopting it. The new peak-comparator in the proposed APC was very robust to zero density variations maintaining the correct decision point of the current comparison at high data rate. It was also suitable for a low power consumption and a monolithic chip due to lack of large capacitors.

A Burst-mode Automatic Power Control Circuit Robust io Mark Density Variations (마크 밀도 변화에 강한 버스트 모드 자동 전력 제어 회로)

  • 기현철
    • Journal of the Institute of Electronics Engineers of Korea SD
    • /
    • v.41 no.4
    • /
    • pp.67-74
    • /
    • 2004
  • As data rate was increased, the conventional burst-mode automatic power control circuit caused errors due to the effort of the mark density variation. To solve this problem we invented a new structured peak-comparator which could eliminate the effect of the mark density variation even in high date rate, and revised the conventional one using it. We proposed a burst-mode automatic power control circuit robust to mark density variations. We found that the peak-comparator in the proposed automatic power control circuit was very robust to mark density variations because it affected very little by the mark density variation in high date rate and in the wide variation range of the reference current and the difference current.

Frame Synchronization Scheme for High Oversampling Rate Based QPSK Receiver in the Underwater Acoustic Burst Transmission (초음파를 이용한 수중 버스트 전송에서 높은 과샘플율 기반 QPSK 수신기의 프레임동기 방안)

  • Park Jong-Won;Kim Seung-Geun;Lim Young-Kon;Kim Youngkil
    • The Journal of the Acoustical Society of Korea
    • /
    • v.24 no.8
    • /
    • pp.462-468
    • /
    • 2005
  • In this paper, we present a frame synchronization scheme for high oversampling rate based QPSK receiver system in the underwater acoustic burst transmission. The proposed frame synchronization scheme determines the frame synchronization by comparing a threshold value with the correlation between the received symbol sequence and rotated 16-symbol length CAZAC sequence, which is made by dividing into two 8-symbol length sequences and then concatenating the latter sequence and the former one. If the correlation value is bigger than the threshold value, the frame detector determines that the frame synchronization is achieved at that sample. Also, the approximated performance of designed frame detector is derived and it is well fit the simulated result.

Design of a Digital Burst MODEM for High-Speed ATM Satellite Communications Part II : Performance Analysis of an Integrated Receiver (고속 ATM 위성통신을 위한 TDMA 버스트 모뎀 설계 II부 : 수신기 연동 성능평가)

  • Hwang, Sung-Hyun;Choi, Hyung-Jin
    • Journal of the Korean Institute of Telematics and Electronics S
    • /
    • v.35S no.10
    • /
    • pp.27-33
    • /
    • 1998
  • In this paper, we designed a demodulator using proposed synchronization techniques and algorithms for high-speed ATM satellite burst modem, and analyzed various performance in the AWGN channel. In addition, as the preamble progressed, each synchronization process can be analyzed by using the mean and variance characteristics, and the convergence state and operation state using convergence probability can also be determined. In conclusion, we analyzed the Cell Loss Ratio(CLR) by integrating the burst acquisition with Unique Word(UW) detector performance, and verified that proposed TDMA receiver satisfied the generally required CLR performance adequately.

  • PDF

Research of Synchronization Schemes for Uplink Cable Modem System (상향 링크 케이블 모뎀 시스템을 위한 동기 방법)

  • Kim, Young-Je;Oh, Wang-Rok;Kim, Whan-Woo
    • Journal of the Institute of Electronics Engineers of Korea TC
    • /
    • v.45 no.2
    • /
    • pp.6-12
    • /
    • 2008
  • In uplink cable modem link operated in time-division multiple access mode, it is crucial to employ a suitable preamble pattern enabling frame detection, coarse timing/carrier recovery. Preamble pattern based on the constant envelope zero autocorrelation sequence is proposed for the uplink cable modem compliant to the data over cable service interface specification. Frame detection, coarse/fine timing and carrier recovery algorithms suitable for the proposed preamble pattern are also proposed. We check up the performances using numerical results.

MAC Protocol for Bursty Traffic in Wireless ATM Networks (무선 ATM망에서 버스트 트래픽을 위한 MAC 프로토콜)

  • 임인택;양성룡;허정석
    • Proceedings of the Korean Institute of Information and Commucation Sciences Conference
    • /
    • 2001.10a
    • /
    • pp.117-120
    • /
    • 2001
  • In this paper, a contention-based reservation MAC protocol is proposed for non-real-time bursty traffic services in the wireless ATM networks. In order to reduce the collisions of the reservation request packets, the base station scheduler calculates the transmission probability using the number of RAS minislots and the estimated load of the reservation request packets. And it broadcasts the calculated transmission probability through the downlink control channel. Mobile terminals, which have a traffic burst, select randomly a RAS minislot and transmit the reservation request packet with the received transmission probability. The reservation request packet contains the number of packets in the buffer. The base station allocates slots based on the buffer status of the received reservation request packets.

  • PDF

Burst Signal Detecting Algorithm for HomePNA v2.0 Preamble Pattern (HornePNA v2.0 프리앰블 패턴에 적합한 버스트 신호 검출 알고리즘)

  • 김경덕;황성현;최형진
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.26 no.11A
    • /
    • pp.1848-1857
    • /
    • 2001
  • This paper proposes the ETEO and MTEO burst signal detector based on TEO algorithm. These algorithms must be used after STR and AGC operation, but are not related to phase and frequency offset. ETEO algorithm is extended version of original TEO, and MTEO algorithm is proposed for improving the output characteristics of ETEO. Also, modified ETEO and MTEO algorithm are proposed for detection of PREAMBLE64. Optimal threshold value is determined and miss and false alarm probability and FER performance are evaluated by computer simulation. Finally, this paper proposes MTEO algorithm with M=3 to guarantee the Performance that FER is less than 10$\^$-2/.

  • PDF

A Study on the QoS of Real-Time Traffic in Bursty Queueing Scheme (버스트 큐잉 구조에서 실시간 트래픽 QoS에 관한 연구.)

  • Kim, Gwang-Joon;Jang, Hyok;Na, Sang-Dong;Bae, Chul-Soo
    • Proceedings of the Korean Institute of Information and Commucation Sciences Conference
    • /
    • 1999.11a
    • /
    • pp.401-405
    • /
    • 1999
  • 본 논문은 실시간성 서비스인 버스트 트래픽을 갖는 ATM(Asynchronous Transfer Mode)망에서 실시간 연결 수락 제어를 위한 종단간의 지연보장을 알고리즘을 이용하여 실시간 서비스 트래픽 서비스 품질의 성능에 대해 분석하였다. 셀 손실 확률은 QoS(Quality of Service)의 기준이 되므로 제안된 실시간 알고리즘은 일정한 버퍼 메모리 크기와 연결 요청에 대한 수락 여부 즉, 연결 수락 여부의 결정을 위한 하나의 큐잉 서비스를 필요로 한다. 이러한 트래픽 소스 각 타입에 대한 초과된 셀에 대한 셀 손실 확률은 트래픽 소스 타입 전체에 하나만 존재하더라도 요구를 충족시킬 수 없으므로, 본 논문에서 제안된 버스트 트래픽 특성에 따라 지연보장 알고리즘을 이용한 큐 서비스 방식은 기존의 종단간 지연 보장 알고리즘들에서 사용하던 씬 정렬을 이용하지 않고 몇 개의 FIFO 큐로 구성된 라운드로빈 큐를 이용하여 복잡성을 크게 감소시켰으며 실시간 서비스와 비실시간 서비스의 서비스방식을 효과적으로 결합하여 다양한 QoS를 보장해야 하는 ATM망에 효과적으로 적용할 수 있고 제안된 알고리즘에 산출되는 각각의 셀 손실 확률에 충분한 상한선을 제공하는 전형적인 매개변수를 사용하여 성능을 분석한다.

  • PDF