• Korean Architects
• /
• no.1 s.51
• /
• pp.16-29
• /
• 1973

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.11 no.2
• /
• pp.1-9
• /
• 2012

This study proposed a method to determine the number and location of bus information terminals (BIT), which is a device to provide passengers with bus arrival time at bus stops in a Bus Information System (BIS). In low-density area, it is not efficient to survey bus demands such as the number of passengers at all bus stops due to time and cost. This kind of a survey would, however, competently cover all bus stops if performed inside the bus. The number of riding-on and -off passengers is observed for every bus stop, and this data collection is repeated over all day. Data obtained from the survey are aggregated each bus stop. This study defines Utility Index (UI), an aggregate each bus stop. Bus stops are ranked according to UI and determined for a BIT within budget limitation. As a case study, a bus line in Jeju island, Korea, was dealt with. This case showed that the more aggregate the better data quality. This study is expected to contribute to solving a location problem of BITs in a BIS.

• Journal of Korea Port Economic Association
• /
• v.28 no.2
• /
• pp.43-59
• /
• 2012

Recently, there has been a noticeable increase in the number of tourists in islands that are well-known for their natural landscapes. It is expected that this number will go up steadily, due to the increase in per capita income and leisure time. Regarding tourism transportation, utilizing linkage transport between coastal passenger terminal and inland transport system is crucial. However, the existing system does not measure up to the expectations. This is attributable to the fact that the distances between coastal passenger terminals and inland transportation terminals are too far. Also, the current public transportation system lacks support and needs to take the role of connecting the two terminals. This study shows how coast-inland linkage transport system should be reformed in order to promote island tourism. It focuses on building linkage transport system and minimizing walking distance. Also, adjusting passenger ship schedule to the characteristics of island tourism is needed. For the sake of passengers, coastal passenger ship fare should be reduced, and integrated transport information should be provided.

• Proceedings of the Korea Society of Information Technology Applications Conference
• /
• 2002.11a
• /
• pp.296-303
• /
• 2002

The main subject to become a hub port is automation. The automated container terminal has already operated in advanced ports and it has been planned for the basic planning and operation design in domestic case. The key of automated container terminal is effective operation of both ATC(automated transfer crane) and AGV(automated guided vehicle) which is automated handling equipments. This is essential to poductivity of automated container terminal. This study suggests the most optimal method of equipment operation in order to minimize loading time using each three types of effective ATC operation methods and AGV dispatching rules in automated container terminals. As the automated equipment operation causes unexpected deadlocks or interferences, it should be proceeded on event-based real time. Therefore we propose the most effective ATC operation methods and AGV dispatching rules in this paper. The various states occurred in real automated container terminals are simulated to evaluate these methods. This experiment will show the most robust automated equipment operation method on various parameters(the degree of yard re-marshaling, the number of containers and the number of AGVs)

• Proceedings of the Korea Society for Industrial Systems Conference
• /
• 2002.11a
• /
• pp.296-303
• /
• 2002

The main subject to become a hub port is automation. The automated container terminal has already operated in advanced ports and it has been planned for the basic planning and operation design in domestic case. The key of automated container terminal is effective operation of both ATC(automated transfer crane) and AGV(automated guided vehicle) which is automated handling equipments. This is essential to productivity of automated container terminal. This study suggests the most optimal method of equipment operation in order to minimize loading time using each three types or effective ATC operation methods and AGV dispatching rules in automated container terminals. As the automated equipment operation causes unexpected deadlocks or interferences, it should be proceeded on event-based real time. Therefore we propose the most effective ATC operation methods and AGV dispatching rules in this paper. The various states occurred in real automated container terminals are simulated to evaluate these methods. This experiment will show the most robust automated equipment operation method on various parameters(the degree of yard re-marshaling, the number of containers and the number of AGVs)

• Journal of Korean Society of Transportation
• /
• v.33 no.2
• /
• pp.136-144
• /
• 2015

It has reported that a median bus-stop island on an exclusive median bus corridor has shortened a unit crossing distance, encouraged a pedestrian's illegal jay walking, and thus increased the number of accidents in the area. Therefore, this study plans to analyze the various crossing patterns of pedestrians at exclusive median bus corridors. This study analyzes 30,184 pedestrian crossing data which are collected from the median bus-stops, 'Express Bus Terminal,' and reveals that the rate of spatial jaywalking was 37.8%. This rate is 11.1 times higher than the rate of traffic signal violation. Therefore, this study suggests that more research needs to be done to provide a traffic safety facilities for protecting spatial crossing pedestrians and preventing jaywalking and traffic signal violation.

• Journal of the Korea Convergence Society
• /
• v.12 no.4
• /
• pp.217-228
• /
• 2021

After the integrated fare system has been applied, public transportation and transfer traffic increased. As a result, transfer passengers must be considered in the operation of the bus. Although previous studies have limitations due to utilizing deterministic mathematical models, which fails to reflect the stochastic movements of passengers and buses, in this study, a more realistic bus stop micro-simulation model is proposed. Based on the proposed simulation model, we represent the relationship between bus arrival interval and passenger wait time as a regression model and empirically show the differences between the cases with and without transfer passengers. Also, we propose a method converting passenger waiting time to cost and find optimal bus arrival interval based on the converted cost. It is expected the proposed method enables bottom-up decision making reflecting practical situation.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.12 no.1
• /
• pp.47-52
• /
• 2017

This study is BIT(: Bus Information Terminal) features that take advantage of KEPCO eIoT(: energy Internet of Thing) platform, and it's Network configuration is composed of display terminal device, gateway, platform, and the service server. The key features are parts for processing protocol data between the gateway and the device using LoRa(: Long Range) technology, Intelligent applications and SIP(: Session Initiation Protocol) data handling connected to the Taxi reservation system. And the resource tree provided BIT for the service, which commonly used in the application server and the device.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2002.11a
• /
• pp.63-70
• /
• 2002

The main subject to become a hub pen is automation The automated container terminal has already operated in advanced pons and it bas been planned for the basic planning and operation design in domestic case. The key of automated container terminal is effective operation of both ATC(automated transfer crane) and AGV(automated guided vehicle) which is automated handling equipments. This is essential to productivity of automated container terminal. This study suggests the moat optimal method of equipment operation in order to minimize loading time using each three types of effective AT operation methods and AGV dispatching rules in automated container terminals. As the automated equipment operation causes unexpected deadlocks or interferences, it should be proceeded on event-based real tine. Therefore we propose the most effective ATC operation methods and AGV dispatching rules in this paper. The various states occurred in real automated container terminals are simulated to evaluate these methods. This experiment will show the most robust automated equipment operation method on various parameters(the degree of yard re-marshaling, the number of containers and the number of AGVs).

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.5D
• /
• pp.617-625
• /
• 2008

In low-density areas where travel pattern is widely dispersed and travel demand is relatively low, transit operators find it very difficult to provide a reasonable level of service at a reasonable cost. Timed-transfer system or network, if designed properly, can provide a reasonable level of service for passengers using transit systems serving low-density areas. The paper intends to apply a timed-transfer system for bus lines serving Yangsan City area and to assess the effects resulted from the application. The concept of a timed-transfer network/system is briefly described, and the present conditions of bus systems in Yangsan City area are discussed, focusing on the aspects of network type and the related problems. The bus timed-transfer network for the area is then developed by adjusting the existing routes and network with the consideration of travel time, route alignments, headways and transfer centers. One must note that developing a timed-transfer network presumes that network and schedule should be developed together. The effects of the developed time-transfer system on the passengers and operators are found substantially so as to justify its introduction to the City. The results of this study will be of considerable use for planners to design the transit systems in low density areas, where in general travel activities are widely dispersed and travel demands are low, so that provision of good quality of transit services are difficult.