• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.23 no.6
• /
• pp.1419-1424
• /
• 1998

In phased array antennas that scan elevation, the number of radiator rows is one of the important factors to minimizing both cost and weitht. Therefore, the antenna tilt angles having relation with element spacing are among the improtant design parameters. The exact optimum tilt angles for several types of uniformly and nonuniformly excited arrays are obtained theoretically. Four types of uniform linear arrays and Chebyshev array factors as a nonuniformly excited arrav are considered.

• Proceedings of the Korean Society for Emotion and Sensibility Conference
• /
• 2001.11a
• /
• pp.25-29
• /
• 2001

소비자 감성 분석에 근거한 블록 스트라이프 패턴(block stripe pattern)의 디자인 방법을 제안하고자 남녀 30명을 대상으로 명도, 폭, 간격이 조작된 서로 다른 27개의 블록 스트라이프 패턴의 자극물을 제시하여 감성평가를 실시하였다. Likert 척도에 의해 명도, 배열, 폭, 간격의 4가지 디자인 요소가 요인분석을 통해 도출된 12개의 감성차원에 미치는 영향을 측정하고, 물리량에 근거한 정량적 분석을 통해 감성과의 관계를 파악하였다. 이를 근거로 각각의 감성에 부합하는 명도, 배열, 폭과 간격의 디자인 요소별 물리량과 함께 디자인 요소의 물리적 변화에 따른 감성예측 회귀모형을 도출하였다. 디자인 요소 중 명도차, 간격, 폭의 순으로 디자인 요소의 물리량 변화가 유의적인 감성차를 유발하는 것으로 나타났다. 이 중 명도차는 "캐주얼한"을 제외한 모든 감성에서 감성차에 영향을 미치는 가장 설명력 높은 디자인 요소로 분석되었다. 이 결과를 토대로 각각의 감성에 부합하는 디자인 요소별 물리량과 함께 디자인 프로토타입을 제시하였다.

• The Journal of the Acoustical Society of Korea
• /
• v.36 no.3
• /
• pp.151-157
• /
• 2017

A general linearly constrained adaptive array is proposed to improve the nulling performance. The nulling performance is examined in the array weight vector space. It is shown that the constraint plane is shifted to the origin perpendicularly by the gain factor such that the increase of the gain factor results in the decrease of the distance from the constraint plane to the origin. Thus the variation of the gain factor has an effect on the extent of orthogonality between the weight vector and the steering vectors for the interferences such that the nulling performance of the general linearly constrained adaptive array is improved by the gain factor. It is observed that the proposed adaptive array with an optimum value of the gain factor yields a better nulling performance in coherent signal environment and a similar nulling performance in noncoherent signal environment compared to the conventional linearly constrained adaptive array.

• The Journal of the Acoustical Society of Korea
• /
• v.27 no.5
• /
• pp.215-220
• /
• 2008

The kerfs between arrayed piezoelectric elements in a medical ultrasonic transducer or a piezoelectric composite transducer are generally filled by polymeric materials. The boundary condition of the elements for lateral mode vibration is changed according to the kerf-filling materials, so that the resonance frequency for longitudinal mode of the transducer is also varied. In this study, to investigate the resonance frequency variation for an arrayed transducer experimentally, the piezoelectric vibration elements of $14mm{\times}0.22mm{\times}0.44mm$ were fabricated and those were linearly arrayed. And, the resonance frequencies were measured for three cases of kerf-filling condition, non-filling and two different kinds of epoxy filling. Conclusively, it is confirmed that the resonant frequency variation shows the similar tendency with the theoretical one for the longitudinal mode.

• Proceedings of the KIEE Conference
• /
• 2009.04b
• /
• pp.109-111
• /
• 2009

본 논문에서는 전자기 유한요소 해석을 이용하여 원전 증기발생기 세관에서의 결함 변화에 따른 배열와전류프로브의 와전류탐상 특성을 해석하였다. 프로브의 전자기적 특성을 해석하기 위하여 3차원 전자기유한요소법을 이용하였다. 해석 대상으로 FBH 결함이 있는 세관을 사용하였으며, 결함의 위치는 관의 외부표면에 존재하게 하고 결함의 깊이는 세관 두께의 20%, 40%, 60%, 80%, 100%로 하였다. 결함의 크기를 변화시켰으며, 시험주파수는 100kHz, 300kHz, 400kHz를 사용하였다. 배열와전류프로브의 방향성에 대한 특성을 확인하기 위하여 축방향 및 원주방향 Notch 결함 신호의 차이를 비교하였다. 본 논문을 통하여 결함형상, 깊이 및 크기, 시험주파수의 변화에 따른 탐상신호의 변화를 확인할 수 있었으며, 본 논문의 결과는 배열와전류프로브의 와전류탐상 신호 평가 시 도움이 될 것이다.

• Journal of IKEEE
• /
• v.24 no.1
• /
• pp.1-8
• /
• 2020

In this paper, a semi-infinite array analysis method is proposed to analyze the defects that may occur during the fabrication of the frequency selective radome. In the analysis of N×N finite array structure using 3D analysis software, much analysis time and memory are required, whereas the semi-infinite array structure analysis proposed in this paper can predict relatively accurate electromagnetic performance while reducing the analysis time. In comparison with the results of the periodic simulation, the simulation of the semi-infinite array structure confirmed the error within ±3%. To verify the results of the simulation, the results were compared with the measured results, and the same tendency at the point of performance change and similar performance degradation at the band of interest were investigated. Using the proposed semi infinite array structure analysis, it is confirmed that the analysis of defects in the electromagnetic periodic structure is possible.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.6
• /
• pp.521-527
• /
• 2002

In this paper, we introduce a procedure to find design parameter for array coupled lines using 2-D finite element analysis. To extract design parameters using FE calculation, we set up several design conditions. In order to show the validity of our approach, we designed, simulated and fabricated a comb-line bandpass filter.

• The Journal of the Acoustical Society of Korea
• /
• v.37 no.1
• /
• pp.53-59
• /
• 2018

In this study, a new design method is developed to optimize the structure of an underwater sparse array sensor. The purpose of this research is to design the structure of a sparse array that has the performance equivalent to a fully sampled array. The directional factor of a sparse planar array is derived as a function of the structural parameters of the array. With the derived equation, the structure of the sparse array sensor is designed to have the performance equivalent to that of the fully array sensor through structural optimization of the number and location of transmitting and receiving elements in the array. The designed sparse array sensor shows beam patterns very close to those of the fully array sensor in terms of PSLL (Peak Side Lobe Level) and MLBW (Main Lobe Beam Width), which confirms the effectiveness of the present optimal design method. Further, the validity of the analytic beam patterns is verified by comparing them with those from the FEA (Finite Element Analysis) of the optimized sparse array structure.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.3
• /
• pp.659-666
• /
• 2015

In this paper, we propose a novel reconstruction method of spatially filtered 3D images in integral imaging based on parallel lens array. The parallel lens array is composed of two lens arrays, which are positioned side by side through longitudinal direction. Conventional spatial filtering method by using convolution property between periodic functions has drawback that is the limitation of the position of target object. this caused the result that the target object should be located on the low depth resolution region. The available spatial filtering region of the spatial filtering method is depending on the focal length and the number of elemental lens in the integral imaging pickup system. In this regard, we propose the parallel lens array system to enhance the available spatial filtering region and depth resolution. The experiment result indicate that the proposed method outperforms the conventional method.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1996.10a
• /
• pp.130-134
• /
• 1996

본 논문에서는 광대역 소음원의 위치를 탐지하여 2차원 영상면에 소음원을 영상화할 수 있는 3차원 마이크로폰 배열을 제안하였다. 배열요소간의 상호상관함수가 2차원 영상면의 화소의 밝기에 대응되도록 영상함수를 유도하였으며 영상면은 사각면 및 원통면등으로 선택 가능 하도록 하여 소음원의 위치동정 해석이 용이하도록 하였다. 몇가지 소음원에 대한 수치 모의 실험결과는 제안된 배열이 소음제어 분야 등에 응용 될 수 있음을 보인다.