• Polymer(Korea)
• /
• v.29 no.4
• /
• pp.344-349
• /
• 2005

Polyurethanes(PUs) were synthesized by reaction of isophorone diisocyanate, acetylbutyl citrate, and 3 types of polycaprolactone diol. Their structures were confirmed by FT-IR and NMR spectrometer. And, their thermal and mechanical properties were measured by TGA ud UTM. The effective network chain lengths ($\bar{M}_c$), measured by compressive modulus apparatus, were about $8000\~24000$ g/mol. As crosslinking density and amount of hard segment increased, tensile strength increased and elongation decreased. As the crosslinking density of PUs increased, thermal property inproved. When the ratio of NCO/OH is 1.1, maximum crosslinking density was achieved.

• Journal of the Korean Chemical Society
• /
• v.30 no.1
• /
• pp.101-104
• /
• 1986

Dialdehydes such as adipaldehyde, glutaraldehyde, and succinaldehyde were readily reduced to give their corresponding 1,6-hexanediol, 1,5-pentanediol, and 1,4-butanediol in good yields in the presence of catalytic amount of hexarhodium hexadecacarbonyl or iron pentacarbonyl in water and methoxyethanol or ethanol at 180$^{\circ}C$ for 4 hr under carbon monoxide atmosphere. Under the same reaction conditions, diketones such as 2,5-hexanedione, 2,4-pentanedione, and 2,3-butanedione afforded their corresponding 2,5-hexanediol, 2,4-pentanediol and 2,3-butanediol in moderate yields. For double hydrohydroxymethylation of dialdehydes or diketones, rhodium or iron carbonyl complexes are more effective than others. Particularly, benzoquinone gave hydroquinone quantitatively.

• Journal of Adhesion and Interface
• /
• v.18 no.3
• /
• pp.127-133
• /
• 2017

In this study, to develop the adhesives with improved waterproof properties for display application, UV-curable urethane acrylate oligomers containing a fluorine moiety were synthesized from hydrogenated polybutadiene diol (HLBH-P2000), perfluoropolyether diol (HTPFPE), isophorone diisocyanate (IPDI) and 2-hydroxyethyl acrylate (HEA). The properties which were related waterproof performance such as contact angle, surface energy and water vapor transmission ratio (WVTR) of synthesized fluorine induced urethane acrylate oligomers were measured. As the HTPFPE content increased, the contact angle also increased from 97.9 degree to 104.4 degree. The surface energy and WVTR decreased as the HTPFPE content increased. The adhesion strength also decreased according to the HTPFPE content increased, and the adhesion strength reduction had greatly increased as the HTPFPE content increased. The findings of this study will be beneficial for developing waterproofing adhesives in the field of display which has recently been a waterproof issue.

• Journal of the Korean Chemical Society
• /
• v.37 no.11
• /
• pp.967-973
• /
• 1993

${\alpha},{\omega}$-Diols such as 1,6-hexanediol and 1,7-heptanediol react with secondary amines in the presence of catalytic amount of ruthenium complex at 180$^{\circ}$C for 24 hrs to give the corresponding diamino compounds in good yields. The yield of diamino compound was affected by the molar ratio of ${\alpha},{\omega}$-diol to secondary amine. The reaction was also affected by the nature of the phosphorus ligands employed. On the other hand, aromatic primary amines react with 1,2,6-hexanetriol in the presence of RuCl_3{\cdot}H_2O-3PPh_3$ at 180$^{\circ}$C for 3 hours under argon atmosphere to give selectively 1-substituted aryl-3-hydroxyperhydroazepines in good yields. Selective synthesis of these products show that two primary hydroxy groups (1,6-positions) oxidize predominantly than secondary hydroxy group (2-position) by ruthenium-phosphorus complex. The yields were decreased according to the order of para-, meta- and ortho-substituent.

• Applied Chemistry for Engineering
• /
• v.33 no.2
• /
• pp.179-187
• /
• 2022

In this study, the synthesis of 1,2-dodecylaminopropanediol (1,2-DDAP) having a 12 carbon chain length and an amine group was designed to improve the preservation and hydrophilicity of 1,2-alkanediol-based compounds. 1,2-DDAP was prepared by reacting dodecylamine (DDA) with 3-monochloro-1,2-propanediol (3-MCPD) in an ethanol solvent at 40 ℃, and its yield and purity were about 56% and 98%, respectively, under a reaction condition of 2 h and a DDA:3-MCPD molar ratio of 1:0.8. The antimicrobial effect of 1,2-DDAP showed the values of the minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC) against microorganisms at concentrations of 10 to 100 times lower than those of 1,2-octanediol(1,2-ODIOL) or 1,2-decanediol (1,2-DDIOL). Based on the hydrophilic properties of 1,2-DDAP, mixed preservatives were prepared by adding small amounts of 1,2-ODIOL or 1,2-DDIOL, which are poorly soluble in water, with 1,2-DDAP. Mixed preservatives exhibited an effect of inhibiting microorganisms equal to or greater than that of 1,2-DDAP alone in antimicrobial activity tests. As a result of confirming the preservation effect in lotion (cosmetic formulation) for application, 1,2-DDAP showed similar antimicrobial activity at concentrations of 0.3 to 0.6 times lower than that of 1,2-ODIOL or 1,2-DDIOL. Therefore, it is considered that the use of 1,2-DDAP alone and the mixed use with small amounts of 1,2-ODIOL or 1,2-DDIOL can be a good alternative to preservatives in the product.

• Journal of the Korean Society of Costume
• /
• v.59 no.6
• /
• pp.126-139
• /
• 2009

The following study from the perspective that the identity of a brand is determined by the creative work of the designer, will review the design identity of fashion house, which have maintained a basic concept of couture house until recently. For this purpose, first, the concepts of fashion house and identity could be examined, and then the design identity of both the past couture designer and the present house designer could be comparatively analyzed. This study focused on John Galliano of Dior, and was carried out under the method of document study and case study. Based on this, the analytic results of the design identity of fashion houses are as follows. The design identity of fashion house, which has its origins in the past couture house, appears from the house characteristics, design characteristics and the design image. The original design identity of Dior House seems to be feminism and elegant extravagance, which naturally models the body line of women into diverse lines. The new design identity of Dior House by Galliano, while reflecting wit and fantasy, at the same time is expressed as sexy and romantic elegance which attempts to express the beauty of modern women. The pursue of chic elegance, which is the characteristic of early Dior design, have changed into avant garde and unique designs with tendencies of multi-culturalism due to the most recent house designers. Finally, Dior house design has successfully maintained the master of handcrafted quality based on craftsmanship, the history from the house archive, and the modern trends appropriately added by the creativity of Galliano.

• Polymer(Korea)
• /
• v.34 no.6
• /
• pp.507-510
• /
• 2010

Poly(cyclohexane carbonate) diol was synthesized by the alternating copolymerization of cyclohexene oxide and $CO_2$ over Cr based transition metal catalysts. The prepared PCCD was applied as a precursor for the preparation of waterborne polyurethane (PUD) in order to investigate an application field of carbon dioxide-based polycarbonate. The scratch resistance and thermal properties of PUDs, which was prepared with two kinds of polymeric diols (PCD and PCCD) were investigated. The scratch resistance and thermal decomposition temperature of PUD film prepared with PCCD is worse than those prepared with PCD, poly(hexamethylene carbonate) glycol. While, glass transition temperature of PUD film prepared with PCCD was higher than that prepared with PCD. It might be due to the rigid cyclohexane structure in the PCCD.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2005.11a
• /
• pp.417-421
• /
• 2005

Novel two synthetic technics using cationic ring-opening copolymerization of tetrahydrofuran (THF) and ethylene oxide (EO), or just polymerized EO on Poly-THF, could lead to random hydroxyl-terminated poly(EO-ran-THF) or tri-block PEG-PTHF-PEC, respectively. These reactions were carried out using $BF_3O(C_2H_5)_2$ as catalyst, 1,4-butanediol or PTHF as diol initiator. Copolymer structures were controlled by monomer feed ratio, or initial PTHF and EO monomer added amount. The molecular weight of polymer was merely dependant on the ratio of [monomer]/[diol], but not on catalyst. Well-defined random and block hydroxyl-terminated copolyether was found to be as the prepolymer for the propellant binder from the experiment to polyurethane with them.

• Polymer(Korea)
• /
• v.24 no.1
• /
• pp.72-81
• /
• 2000

Benzoic acid polyester/lactone polyol were synthesized by polycaprolactone 0201 as diol, trimethylolpropane as triol, adipic acid as dibasic acid, and benzoic acid as monobasic acid. Polyisocyanate prepolymer Desmodur N-100 of HDI-biuret type was used in this study. Two-component polyurethane coatings were prepared by blending benzoic acid polyester/polycaprolactone, polyisocyanate, wetting/dispersing agent, white pigment, and flowing agent. Various properties were examined on the film coated with the prepared polyurethane. They showed excellent physical properties such as abrasion resistance, accelerated weathering resistance, and yellowness index. They also showed good physical properties such as flexibility, impact resistance, 60$^{\circ}$ specular gloss, cross hatch adhesion, hydrocarbon resistance, and lightness index difference. Hardness of coating showed a little poor character. The introduction of polycaprolactone 0201 as diol in the polyurethane coatings improved the hydrocarbon resistance, impact resistance, and flexibility of coatings. According to the drying and curing behavior with the contents of benzoic acid, they seem to have reasonable coating properties such as drying time of 2 to 4 hours and pot-life time of 20 to 37 hours.

• Polymer(Korea)
• /
• v.39 no.2
• /
• pp.235-239
• /
• 2015

In this work, we evaluated catalytic activity of LiOH, $Cu(acac)_2$ and n-butyltin hydroxide oxide hydrate in the early stage of the melt transesterification of isosorbide and bisphenol A as diol monomers and diphenylcarbonate for the melt polymerizaiton of polycarbonate. $Cu(acac)_2$ proved to be the most active catalyst for homopolymerization process, while the catalytic activity of LiOH was higher than the others in case of melt copolymerization depending on the catalytic mechanism and chemical structure of catalyst. We suggested that evaluation of catalytic activity can be used for selection of catalyst system in bio-based copolymerization of polycarbonate.