• Journal of Biomedical Engineering Research
• /
• v.20 no.3
• /
• pp.323-329
• /
• 1999

This paper proposed a method for the cancellation of the moving artifact which was produced during the detection of drowsiness usmg electrodermal activity signal. Two types of wrist electrode were developed to overcome the defect of the steering wheel type electrode which couldn't eliminate the moving artifacts due to driver's movements. Wrist type electrode II which has been modified from electrode type I was most effective for eliminating movmg artifacts compared to wheel type electrode and wrisL type electrode 1. The decIsion criteria(if IRI$\leq$10 and 1.1$\leq$dNz) for detecting moving artifact was determined from the virtual driving experiments. An algorithm which substituted past value of Nz for the current value of Nz whenever an EDA signal satisfied the criteria was developed. The experimental resulls of virtual driving and road test showed that the proposed algorithm had been successfully removed the most of the error due to the moving artifact Therefore, the developed system which use electrode type II and the algorithm might be less influenced by moving artifacts and could measure an accurate arousal state.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.45 no.5
• /
• pp.21-27
• /
• 2008

Despite recent studies on development of pulse diagnosis systems and needs for commercializing them, the reproducibility is one of the most controversial issues as ever. Because the pulse pressure value, which is one of the important parameters to evaluate reproducibility, is very vulnerable to moving artifacts, the reproducibility can not be obtained easily. In this paper, we suggested a moving artefacts detection system for a pulse diagnosis system so that a pulse diagnosis system can be robust to theses kinds of artefacts by excluding the contaminated parts from the pulse wave signal to be analyzed. This moving artifacts detection system was designed to consist of a three-axis accelerometer, an electromyography amplifier and a two-axis tilt sensor. To assess the suitability of the system, we examined the characteristics of each sensor's output signals with regard to the three specific motions such as extension, flexion and rotation. And, we also examined the each sensor's response to the high-frequency and low-frequency moving artifacts while the pulse wave signal was acquired from a pressure sensor for the pulse diagnosis. From these results, we could find that the response to subject's motions would be reflected in electromyography signal first, in accelerometer signals and in tilt sensor sequently. And, the facts that a stable pulse wave can be acquired in two seconds after high frequency or low frequency motions ended, were also found. Consequently, based on these findings, we set up some rules on the moving artifacts detection and designed an algorithm which is fit for our moving artifacts detection system.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.46 no.5
• /
• pp.120-125
• /
• 2009

For effective noise removal prior to video processing, noise power or noise variance of an input video sequence needs to be found exactly, but it is actually a very difficult process. This paper presents an accurate noise variance estimation algorithm based on motion compensation between two adjacent noisy pictures. Firstly, motion estimation is performed for each block in a picture, and the residue variance of the best motion-compensated block is calculated. Then, a noise variance estimate of the picture is obtained by adaptively averaging and properly scaling the variances close to the best variance. The simulation results show that the proposed noise estimation algorithm is very accurate and stable irrespective of noise level.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.4
• /
• pp.986-991
• /
• 2014

The PPG signal used in mobile-healthcare and telemedicine system is including the various motion artifact that is signal generated from patient's movements. Recently, although the various methods to remove motion artifacts have been suggested, the performances of these methods are still not satisfactory. Therefore, this s study suggested the novel method based on the Kalman filter and adaptive filter to remove motion artifacts, and we used various motion artifacts to analyze the performance of the proposed method. In the results of experiments, the signal-to-noise ratio of proposed method showed good performace that was 4.8 times of moving average filter.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.3 no.3
• /
• pp.14-21
• /
• 2010

For the ubiquitous healthcare environment, real-time measurement of biomedical signals and accuracy of the measured biomedical information are very important. In addition, it is important to develop a healthcare device with low power In this paper, the synchronized pulse in a heartbeat was detected from the radial artery using the piezo film sensor, in order to eliminate inconvenience to wear a pulse detection finger probe. We can get a best output after applying the adaptive noise canceller using two piezo film sensor signals, pulse signal having motion artifacts and motion artifacts reference signal. To detect heartbeat, we use maximum point detection method from pulse removed motion artifacts.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38C no.12
• /
• pp.1085-1094
• /
• 2013

In this paper, we propose a methods to eliminate PPG sensor noise resulted from user motion during measurement. Measured PPG signals require approperiate signal processing methods since various types of noises such as a motion noise by user movement and signal noises occurred from the change of measuring environments. This paper suggests a signal processing method that eliminates motion noises by measuring several PPG channels that are based on the stable patterns of the practical users. The PPG signals are measured by the two channels in this experiment. When the individual error rates are 20%, the proposed algorithm reduces the errors to 9.56%.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.8B
• /
• pp.1129-1140
• /
• 2001

본 논문에서는 블록기반 동영상 부호화에서 나타나는 양자화 잡음을 그 특성에 맞게 모델링을 하고, 이를 기반으로 웨이블렛 변환(wavelet transform)을 이용하여 양자화 잡음을 제거하는 후처리 방법을 제안한다. 제안된 방법에서는 양자화 잡음을 특정 프로화일(profile)로 표현되는 블록화 잡음과 비에지 화소(non-edge pixel)에서 백색 가우시안 특성을 가지는 나머지 잡음의 합으로 모델링 한다. 이러한 양자화 잡음의 모델을 기반으로 정칙화 미분(regularized differentiation)을 표현하는 Mallat의 1차원 웨이브렛 변환을 이용하여 영상복원 관점에서 각각의 잡음을 제거한다. 먼저, 웨이브렛 영역의 블록경계에서 임펄스로 나타나는 블록화 잡음 성분들의 크기를 추정하여 줄임으로 해서 블록화 잡음을 제거한다. 이때 임펄스 크기의 추정은 메디안 필터와 양자화 파라미터(quantization parameter), 그리고 국부 활동도(local activity)를 이용하여 이루어진다. 그리고 나머지 잡음은 비에지 화소에서 연역치화(soft-thresholding)을 수행함으로써 제거한다. 이러한 후처리 방법의 구현은 실시간 응용을 위해 웨이브렛 필터를 이용하여 근사적으로 공간 영역에서 이루어진다. 실험 결과, 제안된 방법이 다양한 영상과 압축률에 대해 MPEG-4 VM(verification model) 후처리 필터(post-filter)보다 PSNR 성능뿐만 아니라 주관적 화질면에서도 우수함을 확인하였다.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2012.11a
• /
• pp.246-248
• /
• 2012

심전도는 측정 기기에서 발생하는 전기적 잡음이나 근육에서 발생하는 근전도에 의한 잡음, 전극을 부착한 사람의 움직임에 의한 동잡음 등에 민감한 특성을 보인다. 또한 심장의 이상으로 인하여 왜곡이 심하게 발생하므로 심전도에서 의미 있는 구간을 검출하기 위해서는 이들을 보완하는 알고리즘이 필수적이라 할 수 있다. 논문에서는 심전도 분석의 보조를 위하여 입력된 심전도가 가지는 잡음과 왜곡을 제거하고 구간의 위치를 출력하는 시스템을 제안한다. 이를 위해 관련 알고리즘 중, 가장 널리 알려진 'Pan & tompkins algorithm'을 시스템에 이식하였고 알고리즘의 각 단계를 알아보기 쉽게 출력하는 인터페이스를 구성하였다. 시스템의 기능을 확인하기 위해 MIT/BIH 데이터베이스를 이용하였으며, 잡음과 왜곡이 심하여 육안으로 구간을 확인하기 힘든 심전도에서도 높은 구간검출 정확도를 확인할 수 있었다.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.4
• /
• pp.207-212
• /
• 2015

We propose a noise estimation method using edge detection in moving pictures. Edge detection is to exclude structures and details which have an effect on the noise estimation. To detect edge, we use Sobel and morphological closing operators which are robust to details of images. The proposed noise estimation method is more efficiently applied to noise estimation in various types of moving images and has better results than those of existing noise estimation methods. Also, proposed algorithm can be efficiently applied to image and video applications.

• Journal of Broadcast Engineering
• /
• v.14 no.4
• /
• pp.501-508
• /
• 2009

This paper proposes an efficient transform-domain noise reduction scheme in an H.264 video encoder, where the generalized Wiener filtering is performed in a quantization process by multiplying each transform block with its adaptive multiplication factor. In practice, the computational complexity of the proposed scheme is negligible by replacing the multiplication operation with a simple look-up table method. Also, experimental results show that the proposed scheme provides outstanding noise reduction performance in an H.264 video encoder.