• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2015.05a
• /
• pp.139-140
• /
• 2015

주석(Sn)은 뛰어난 유연성을 나타내기 때문에 접촉저항을 감소시킬 목적으로 전자부품과 전자기기의 도선과 단자를 피복하는데 사용된다. 하지만 특정한 조건에서 시간경과와 함께 위스커라는 침상결정이 발생하여 회로 단락을 초래하는 것이 문제이다. 위스커는 직선형, 굴곡형, 곡선형의 형태로 성장하며 직경은 $1{\mu}m$, 길이는 수백 ${\mu}m$에서부터 수 mm에 이른다. 발생 초기단계에서 성장이 정지된 작은 덩어리도 위스커와 함께 관찰된다. 주석도금 피막에서 발생하는 위스커는 1940년대 미국의 전화교환기 단락원인으로 널리 알려지게 되었다. 이러한 위스커를 억제하는 방법으로 주석-납 도금이 개발되었다. 주석-납 도금피막에서는 작은 덩어리가 다수 발생하는 반면에 위스커는 발생하지 않는다. 하지만 2006년 7월에 시행된 RoHS(Restriction of the use of certain Hazardous Substances) 지령에서 수은, 카드뮴, 6가 크롬 및 납은 유해물질로 지정되어 사용이 엄격히 규제되고 있다. 주석 도금피막의 위스커가 발생하고, 성장하는 원인으로 도금피막 내부의 압축응력과 전위, 산화피막, 도금피막-기판계면에서 발생하는 금속간화합물 주변의 변형을 들 수 있다. 본고에서는 도금하여 얻은 주석피막 표면에 형성된 위스커를 중심으로 증착피막과 주석도금 피막을 용융 응고하여 형성된 합금의 경시변화를 비교하고, 작은 덩어리와 위스커의 발생 및 성장 기구에 관하여 기술하였다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.06a
• /
• pp.180-181
• /
• 2006

CdSe single crystal was grown by sublimation method in the two-step vertical electric furnace. This CdSe single crustal had hexagonal structure whose lattice constants of $a_0$ and $c_0$ were measured $4.299\;{\AA}$ and $7.009\;{\AA}$ by extrapolation method, respectively. CdSe single crystal was n-type semiconductor values were measured from Hall data by Van der Pauw method in the room temperature. Mobility tends to increase in proportion to $T^{3/2}$ from 33K to 130K due to impurity scattering. but mobility tends to decrease in proprtion to $T^{-3/2}$ from 130K to 293K due to lattice scattering. CdSe thin film was made by electron beam evaporation technique had also hexagonal structure. The grain size of this thin film was grown to $1{\mu}m$ as a result of annealing in the vapor of Ar or Cd. Annealde CdSe thin film was n-type semiconductor whose carrier density had about $7{\times}10^{12}cm^{-3}$ and its mobility had about $1.6{\times}10^3cm^2/V$ sec at room temperature.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.06a
• /
• pp.91-92
• /
• 2006

The important merit of Bi-2212/Ag wire is to apply cable as round wire state. Bi-2212 high Tc superconducting wires were fabricated in order to apply Rutherford cable near the future. Various Ag ratio from 0.22 to 0.42 of Ag tubes for PID (powder-In-Tube) process were used to investigate the workability and to prevent breakage of filaments during drawing. In order to find proper heat treatment condition, we investigated micro-structure of Bi-2212/Ag wires by using differential thermal analysis, XRD and SEM. The effect of atmosphere on the peritectic decomposition temperature of precursor was investigated. The shape of grain was observed by SEM to investigate Bi-2212 phase formation in filaments. The higher of Ag ratio of mono filament had the higher critical current density, Jc. The wire with 0.42 of Ag ratio showed 7,886 A/cm2 of Jc at 77K.

• Journal of Korean Society of Water and Wastewater
• /
• v.30 no.6
• /
• pp.745-753
• /
• 2016

The objective of this study was to investigate design factors of the electrolysis reactor through the CFD(computational fluid dynamics) simulation technique. Analyses of velocity vector, streamline, chloride ion concentration distribution showed differences in flow characteristics between the plate type electrode and the porous plate type electrode. In case of the porous plate type electrode, chlorine gas bubbles generated from the anode made upward density flow with relatively constant velocity vectors. Electrolysis effect was more expected with the porous plate type electrode from the distribution of chloride ion concentration. The upper part of the electrolysis reactor with the porous plate type electrode had comparatively low chloride concentration because chloride was converted to the chlorine gas formation. Decreasing the size and increasing total area of rectifying holes in the upper part of cathodes, and widening the area of the rectifying holes in the lower part of cathodes could improve the circulation flow and the efficiency of electrolysis reactor.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.3 s.96
• /
• pp.62-71
• /
• 1999

Integrating micro-machined sensors and actuators on the conventional devices with the copper power lines was incompatible to fabricate the mass produced micro electromechanical system (MEMS) devices. To achieve the compatibility of the wiring method between MEMS parts and devices, we developed the three-dimensional sputter-evaporation system that coats micropatterned thin copper films on the surface of the MEMS element. The system consists of a process chamber, two branch chambers, the substrate holder, and a linear-rotary motion feedthrough. Thin copper film was sputtered and evaporated on the biocompatible polymer, Pellethane$^{circed{R}}$ and silicone, catheter that is 2 mm in diameter and 700 mm in length. The metal film coating technique with three-dimensional thin film sputter-evaporation system was developed to apply the power and signal lines on the micro active endoscope. In this paper, we developed the three-dimensional metal film sputter-evaporation system operated on the low temperature for the biopolymeric substrates used in the medical MEMS devices.

• Proceedings of the KSR Conference
• /
• 2008.11b
• /
• pp.666-672
• /
• 2008

Train wheels are the most important part of the high-speed rail system with supporting body, running stably and safely. Wheel exchange and fix plan is computed by the worker who managing entire Train Maintenance Process based on his know-how so that this system is losing its reliability and accuracy. And predicting of the wheel's lifetime is absolutely difficult matter because of uncertainty between trains like mileage of the type of trains, condition of operation, curve section and wheel's cutting pattern. Therefore workers always used to hold many wheels. For this reason, the cost of stock is soar when the level of stock was normal. If the stock is sufficient, the cost of stock will rise. On the other hand, If the stock is deficient, we would have trouble that the plan of the train maintenance process will be failed. Thus this paper aimed at application that "Wheel Managing System" which is able to predict wheel's life-cycle and demands under the RIMS(Rolling-Stock Information Maintenance System) with analysing wheel exchanging and cutting status considering economical or stable aspects.

• 대한상한금궤의학회지
• /
• v.10 no.1
• /
• pp.115-124
• /
• 2018

Objective : The purpose of this paper is to report the improvements of a patient who has suffered from aftereffects following stroke such as dysgraphia and articulation disorder, which is treated by herbal medication based on Shanghanlun disease pattern identification diagnostic system. Methods : According to 'Disease Pattern Identification Diagnostic System based on Shanghanlun Provisions', the patient was diagnosed as Taeyang-byung Gyeolhyung and number 138 provision, and was administered Sohamhyung-tang for 90 days. We recorded the progress of improvements based on the patient's statement and documented the patient's writing Results : The patient can write the letters such as U, 2, ㄹ,ㅇ more clearly and become confident on both writing and speaking. Conclusions : This case shows the effects of Sohamhyung-tang on aftereffects following stroke such as dysgraphia and articulation disorder. It was induced according to the 'Disease Pattern Identification Diagnostic System based on Shanghanlun Provisions' so that it suggest a potential interpretation, which is different with it of the text books Herbal Formula Science and Sanghallonjeonghae, on the provision no. 138. Also the usage of Sohamhyung-tang in this case may support the way far from the diagnosis of oriental neurological medicine, which explain the pathology of stroke as fire-heat(火熱), dampness-phlegm(濕痰), static blood(瘀血) and dual deficiency of qi and blood(氣血兩虛).

• Journal of Climate Change Research
• /
• v.5 no.4
• /
• pp.291-300
• /
• 2014

In this study, we investigated the activity data and basic data of the surface of the water within the ship to be operated by lakes and rivers inland. In this study previously, there was no survey activity data of Ferry and Cruise ship in Korea. In order to ensure the basic data and development of measures to reduce efficiently by local governments, these studies should be performed. Therefore, in the present study was survey the activity data such as cruising time and engine load factor and the specifications of the vessels. As a result, by analyzing the cruising pattern according to the area and the purpose of the cruise, to calculate the emissions of greenhouse gases.

• Korean Journal of Metals and Materials
• /
• v.49 no.4
• /
• pp.334-341
• /
• 2011

The mechanism behind super-filling of high-aspect-ratio features with Cu by catalyst-enhanced chemical vapor deposition (CECVD) coupled with plasma treatment is described and the metrology required to predict the filling feasibility is identified and quantified. The reaction probability of a Cu precursor was determined as a function of substrate temperature. Iodine adatoms are deactivated by the bombardment of energetic particles and also by the overdeposition of sputtered Cu atoms during the plasma treatment. The degree of deactivation of adsorbed iodine was experimentally quantified. The quantified factors, reaction probability and degree of deactivation of iodine were introduced to the simulation for the prediction of the trench filling aspect by CECVD coupled with plasma treatment. Simulated results show excellent agreement with the experimental filling aspects.

• 대한상한금궤의학회지
• /
• v.12 no.1
• /
• pp.171-182
• /
• 2020

Objective : The purpose of this study is to report the improvement in a patient who had Tourette syndrome treated with Hoeyeoksan based on Shanghanlun provisions. Methods: The symptoms of the patient were checked on days 14, 34, 62, 82, 103, and 119 after administration of Hoeyeoksan. Tourette syndrome was evaluated using Yale Global Tic Severity Scale (YGTSS), and oversleep and constipation were evaluated using visual analog scale (VAS). In addition, new clinical implications for the interpretation of Shanghanlun provision 318 were reviewed. Results: Daily tics occurred ten times a day for 14 days after the initial diagnosis but decreased to eight times a day after 34 days, six times a day after 62 days, five times a day after 82 days, twice a day after 103 days, and once a day after 119 days after administration of Hoeyeoksan. Oversleep and constipation improved together with Tourette syndrome. Conclusions: In this study, we observed that Hoeyeoksan had a therapeutic effect by improving the chief complaint of the patient. Hence, the interpretation of Shanghanlun provision 318 must include a patient's behavioral and sleep patterns as predisposing factors of Tourette syndrome.