• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.310-310
• /
• 2016

최근 NAND flash memory는 높은 집적성과 데이터의 비휘발성, 낮은 소비전력, 간단한 입, 출력 등의 장점들로 인해 핸드폰, MP3, USB 등의 휴대용 저장 장치 및 노트북 시장에서 많이 이용되어 왔다. 특히, 최근에는 smart watch, wearable device등과 같은 차세대 디스플레이 소자에 대한 관심이 증가함에 따라 유연하고 투명한 메모리 소자에 대한 연구가 다양하게 진행되고 있다. 대표적인 플래시 메모리 소자의 구조로 charge trapping type flash memory (CTF)가 있다. CTF 메모리 소자는 trap layer의 trap site를 이용하여 메모리 동작을 하는 소자이다. 하지만 작은 window의 크기, trap site의 열화로 인해 메모리 특성이 나빠지는 문제점 등이 있다. 따라서 최근, trap layer에 다양한 물질을 적용하여 CTF 소자의 문제점을 해결하고자 하는 연구들이 진행되고 있다. 특히, 산화물 반도체인 zinc oxide (ZnO)를 trap layer로 하는 CTF 메모리 소자가 최근 몇몇 보고 되었다. 산화물 반도체인 ZnO는 n-type 반도체이며, shallow와 deep trap site를 동시에 가지고 있는 독특한 물질이다. 이 특성으로 인해 메모리 소자의 programming 시에는 deep trap site에 charging이 일어나고, erasing 시에는 shallow trap site에 캐리어들이 쉽게 공급되면서 deep trap site에 갇혀있던 charge가 쉽게 de-trapped 된다는 장점을 가지고 있다. 따라서, 본 실험에서는 산화물 반도체인 ZnO를 trap layer로 하는 CTF 소자의 메모리 특성을 확인하기 위해 간단한 구조인 metal-oxide capacitor (MOSCAP)구조로 제작하여 메모리 특성을 평가하였다. 먼저, RCA cleaning 처리된 n-Si bulk 기판 위에 tunnel layer인 SiO2 5 nm를 rf sputter로 증착한 후 furnace 장비를 이용하여 forming gas annealing을 $450^{\circ}C$에서 실시하였다. 그 후 ZnO를 20 nm, SiO2를 30 nm rf sputter로 증착한 후, 상부전극을 E-beam evaporator 장비를 사용하여 Al 150 nm를 증착하였다. 제작된 소자의 신뢰성 및 내구성 평가를 위해 상온에서 retention과 endurance 측정을 진행하였다. 상온에서의 endurance 측정결과 1000 cycles에서 약 19.08%의 charge loss를 보였으며, Retention 측정결과, 10년 후 약 33.57%의 charge loss를 보여 좋은 메모리 특성을 가지는 것을 확인하였다. 본 실험 결과를 바탕으로, 차세대 메모리 시장에서 trap layer 물질로 산화물 반도체를 사용하는 CTF의 연구 및 계발, 활용가치가 높을 것으로 기대된다.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.39 no.1
• /
• pp.29-36
• /
• 2015

Exact comparisons of the thermal conductivities of the base fluid and a nanofluid are very important in the early stages of nanofluid development. A simple procedure of measuring the thermal conductivity of the two fluids by the transient hot wire method and numerically dividing these values is used for this purpose. However, because the experiments are not performed simultaneously and the physical properties of the measurement system are sometimes not properly known, large errors are incurred during the evaluation process. This article proposes a new apparatus for thermal conductivity comparison where the working principle is mainly based on relative measurement rather than absolute measurement. The measuring circuit and data processing steps are explained in detail; a validation test was performed using the well-known glycerine and engine oil.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.11B
• /
• pp.1363-1372
• /
• 2011

Flooding based routing protocols are usually used to disseminate information in wireless sensor networks. Those approaches, however, require message retransmissions to all nodes and induce huge collision rate and high energy consumption. In this paper, HoGoP (Hop based Gossiping Protocol) in which all nodes consider the number of hops from sink node to them, and decide own gossiping probabilities, is introduced. A node can decide its gossiping probability according to the required average reception percentage and the number of parent nodes which is counted with the difference between its hop and neighbors' ones. Therefore the decision of gossiping probability for network topology is adaptive and this approach achieves higher message reception percentage with low message retransmission than the flooding scheme. Through simulation, we compare the proposed protocol with some previous ones and evaluate its performance in terms of average reception percentage, average forwarding percentage, and forwarding efficiency. In addition, average reception percentage is analyzed according to the application requirement.

• Korean Journal of Optics and Photonics
• /
• v.23 no.4
• /
• pp.135-142
• /
• 2012

We have developed a measurement method of the refractive index profile of an optical fiber by using diffraction phase microscopy. In the microscope system, the reference light was extracted directly from the probe light that passed through the sample by means of pinhole filtering with a diffraction grating. The spatial interference pattern produced by the probe light and the reference light was processed to generate the phase image of the sample fiber. The index profile was obtained by the inverse Abel transform of the phase profile. In order to remove the background phase that originated from the index difference between the cladding and the surrounding medium, the background phase was calculated from the phase data of the cladding to make a core phase profile that can be directly transformed to the index profile of the core without the full phase image that includes the entire cladding part.

• The Journal of Society for e-Business Studies
• /
• v.17 no.3
• /
• pp.1-14
• /
• 2012

As the techniques of electronic and information are advancing, the computing power of a smart phone is becoming more powerful and the storage capacity of a smart phone is becoming larger. As the result, various new useful services are becoming available on smart phones. The context-aware service and mobile augmented reality have recently been the most popular research topics. For those newly developed services, identifying the object in the picture taken by the camera on the phone performs an extremely important role. So, many researches of identifying pictures have been published and most of them are based on the time consuming image recognition techniques. On the contrary, this paper introduces a very fast and effective method of identifying the objects on the photo making use of the sensor data obtained from the smart phone and electronic maps. Our method estimates the line of sight of the camera with the location and orientation information provided by the smart phone. Then it finds any element of the map which intersects the line of sight. By investigating those intersecting elements, our method identifies the objects on the photo.

• Aerospace Engineering and Technology
• /
• v.8 no.1
• /
• pp.49-57
• /
• 2009

The camera electronics in the KOMPSAT-3 payload provides the several control clocks in order to move the charges, which are converted from the light in the pixel, in the vertical and horizontal direction. Generally, the control clocks depend on the CCD internal design in the system. The KOMPSAT-3 payload uses the CCD controlled by 3-phase vertical clocks and 4-phase timing. The camera generates the various clocks such as the vertical clocks, the horizontal clocks, the summing clocks, the reset clocks and so on. The vertical clocks are deeply related to the camera performance and synchronized with satellite scan-rate even though they are relatively slow. Also, it gives the horizontal clocks without distortion under the very fast pixel-rate. This paper shows the design and simulation of the CCD clocks driver for the KOMPSAT-3 payload.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.20 no.2
• /
• pp.181-186
• /
• 2017

Synthetic aperture radar(SAR) has been widely used for reconnaissance. It provides high-resolution, day-and-night and weather-independent images for a multitude of applications. Because SAR coherently combines many viewing angles to effectively create a large aperture(narrow beam) radar, the test-bed should be capable of moving straightly SAR sensor for the integration angle to meet resolution. This paper describes the test-bed developed to test and evaluate the SAR performance. It forms high-quality images in real time and saves the raw data for the purpose of post processing on the ground.

• KSBB Journal
• /
• v.24 no.1
• /
• pp.47-52
• /
• 2009

A pilot-plant biofilter (1750 mm W ${\times}$ 2750 mm L ${\times}$ 2000 mm H) packed with polyurethane foam (20 mm W ${\times}$ 20 mm L ${\times}$ 20 mm H) was installed in an fine chemical plant emitting gas streams containing ethyl alcohol, ethyl acetate, and dichloromethane. The biofilter was successfully operated for 30 days under highly fluctuating incoming concentrations (maximum 3500 ppm) at a residence time of 36 and 60 sec. Both ethyl alcohol and ethyl acetate were removed more than 95%, but dichloromethane removal was less than 50%. Malodor was also removed more than 90% from 17 days after start up.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.5
• /
• pp.153-159
• /
• 2014

In this paper, we propose the Distributed Power Saving Control System that enables the active and intelligent control(on/off and/or dimming control) of the lightning device using sensors and mobile agents. The proposed system is effective for energy saving and induces cost reductions in design and development of power saving control system as adding remote-monitoring or controlling functions is easier with the application of a variety of active rules. Moreover, the system improves the effectiveness of the acquired sensing data by real-time event handling and device controlling using a mobile agent based sensor network middleware that regularize the contextual information or a user's emotion. The results of this paper present the potential applicability of the proposed distributed control system using mobile agent in various active sensor network applications.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.142-144
• /
• 2008

한국전력공사(이하 한전)에서는 배전계통의 최적운영을 위하여 계통운영에 필요한 기술을 발굴하여 축적하는데 많은 노력을 기울여 왔으며, 계통운영의 핵심 툴인 배전자동화 시스템을 통하여 관련기술을 축적해오고 있다. 우리나라처럼 배전자동화 시스템을 전력회사에서 자체적으로 개발하여 활용하는 사례는 전 세계적으로 유일하며, 이를 기반으로 해외 전력시장에 배전자동화 시스템을 수출하기 위하여 활발한 활동을 지속적으로 추진되고 있다. 배전자동화 시스템을 이용하면 원격으로 현장에 있는 배전자동화기기를 감시, 제어, 조작, 정정이 가능한 기본기능이 구현가능하고, 각종 계통운영에 필요한 기술계산, 즉 전압강하계산, 보호협조검토, 표준조작지시서(SOP)의 생성, 상시개방점 위치조정으로 손실최소화, 분산전원 연계계통 기술검토의 자동처리가 가능해진다. 기술계산프로그램은 최초 개발 당시인 2002년에는 배전자동화시스템 주장치가 설치된 장소인 온라인 상태에서만 사용이 가능하여 사용상 제약을 가지고 있었으나, 이를 개선하고자 2006년 10월 배전자동화기반 오프라인형 기술계산프로그램을 개발하였고 이를 지속적으로 업그레이드를 추진하여 활용해오고 있다. 배전자동화기반 오프라인형 기술계산프로그램은 배전자동화주장치에서 데이터를 추출하여 배전자동화주장치가 아닌 일반PC나 노트북에서도 배전자동화시스템에 내장된 배전계통 정보 즉, 선로길이 및 전력선 제원 등을 직접 이용하므로 각종 기술계산을 신속하고 정확하게 수행하는 것이 가능하게 되었다. 따라서 이를 지속적으로 활용하고 성능개선을 추진하여 배전계통 운영시 신뢰도 제고에 크게 기여할 것으로 기대되고 있다.