• Journal of Internet Computing and Services
• /
• v.7 no.1
• /
• pp.131-141
• /
• 2006

Recently, many researchers have been studied several high performance data transmission techniques such as TCP buffer Tuning, XCP and Parallel Sockets. The Parallel Sockets is an application level library for parallel data transfer, while TCP tuning, XCP and DRS are developed on kernel level. However, parallel socket is not analyzed in detail yet and need more enhancements, In this paper, we verify performance of parallel transfer technique through several experiments and analyze character of traffic interference among socket connections. In order to enhance parallel transfer management mechanism, we predict the number of socket connections to obtain SLA of the network resource and at the same time, affected network bandwidth of existing connections is measured mathematically due to the interference of other parallel transmission. Our analytical scheme predicts very well network bandwidth for applications using the parallel socket only with 8% error.

• Journal of the Korean Geosynthetics Society
• /
• v.2 no.1
• /
• pp.39-45
• /
• 2003

The most important part in the earth reinforcement is the interface between soil and the reinforcement. Shear strength and shear behavior in this interface make a great role relating to the reinforcement effect. This paper presents 2 kinds of direct shear test methods. one is the strain free shear test, called 'free method', that is performed by the free condition of allowing tensile strain. The other is the strain fix shear test, called 'fixed method', that is performed by the fixed condition of not allowing tensile strain. Two reinforcements were used such as nonwoven geotextile and geogrid. That is, interfaces are composed of geogrid/sand and geotextile/sand. From the test results it shows us that the fixed method had a greater friction angle and a smaller peak shear strain than those of the free method. Residual stress of the fixed method was bigger than that of the free method but the residual stress ratio was vice versa.

• Korean Chemical Engineering Research
• /
• v.46 no.1
• /
• pp.50-55
• /
• 2008

Carbon Nanotube (CNT) films were deposited with varying deposition temperature by RF plasma CVD on Fe catalysts deposited onto $SiO_2$ films grown thermally on the silicon wafer using $C_2H_2$ and $H_2$ gases. The Fe catalysts on silicon oxide film were made by RF magnetron sputtering. The grounded grid mesh cover on the substrate holder was used for depositing CNT thin films with high purity. The surface morphologies and chemical structure of deposited CNT films were characterized using SEM, Raman, XPS and TEM. It was observed that deposited CNTs films were carbon fiber type having Bamboo-like multiwall structure and CNT film grown at $600^{\circ}C$ was more dense than that at $550^{\circ}C$, but become less dense at $650^{\circ}C$.

• Spatial Information Research
• /
• v.12 no.2
• /
• pp.211-228
• /
• 2004

The purpose of this study is to analyze the sales area of gas stations to see the quality and the efficiencies of spatial distribution structure for petroleum products in Tae-jeon City. Location pattern of gas station is classified by factors of competitive facilities, transportation, population and landuse in Tae-jeon City. As a result, High profit pattern and low profit pattern is classified. The characteristics of the distribution pattern of gas station are that the while densely populated has a small sales area, the thinly populated region has huge ones. Location-allocation model is used in order to minimize the travel distance from consumer location to gas station and balance the spatial distribution of gas station in case studies. The result reveals that the model-based locations of gas stations are more dispersed and balanced in the whole Tae-jeon City compared with the actual location of gas stations. This study shows the characteristics and spatial distribution patterns of sales area and location in petroleum products distribution facilities.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.12
• /
• pp.8306-8313
• /
• 2015

Open-type current sensors have been commonly used for DC motor controller, AC variable controller and Uninterruptible Power Supply. Recently they have begun to be used more widely, as the growth of renewable energy and smart-grid in power system. Considering most of the open-type current sensors are imported, developing the core technology needed to produce open-type current sensors is required. This paper describes the development and test results of open-type current sensors. Design of C type magnetic core, selection and test of a Hall sensor, design of current source circuit and signal conditioning circuit are described. 100A class DIP(Dual In-line Package) type and SMD(Surface Mount Devide) type open-type current sensors was made and tested. Test results show that the developed open-type current sensor satisfies the accuracy requirement of 2% and linearity requirement of 2% at 100 A of DC and AC current of 60Hz. Temperature compensation was carried out by using a temperature compensation circuit with NTC(Negative Temperature Coefficient) thermistor and the effect of the temperature compensation are described.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.15 no.1
• /
• pp.13-24
• /
• 2013

Various elastic wave-based site investigation methods have been used to characterize subsurface ground because the dynamic properties can be correlated with various geotechnical parameters. Although the inherent spatial variability of the geotechnical parameters affects the P-wave propagation characteristics, ground heterogeneity has not been considered as an influential factor. Thus, the effect of heterogeneous ground on the travel-time shift and wavefront characteristics of elastic waves through stochastic numerical analyses is investigated in this study. The effects of the relative correlation lengths and relative propagation distances on the travel-time shift of P-waves considering various intensities of ground heterogeneity were investigated. Heterogeneous ground fields of stiffness (e.g., the coefficient of variation = 10 ~ 40%) were repeatedly realized in numerical finite difference grids using the turning band method. Monte Carlo simulations were undertaken to simulate P-wave propagation in heterogeneous ground using a finite difference method-based numerical approach. The results show that the disturbance of the wavefront becomes more significant with stronger heterogeneity and induces travel-time delays. The relative correlation lengths and propagation distances are systematically related to the travel-time shift.

• Journal of the Korean Geotechnical Society
• /
• v.34 no.5
• /
• pp.19-35
• /
• 2018

The necessity of predicting the spatial information of the site-specific seismic response, which is essential information for the comprehensive earthquake disaster countermeasures, is increasing for the mid-west urban areas where the earthquake-induced damages can be increased due to frequent occurrence of mid-scale earthquake such as 2016 Gyeongju Earthquake and 2017 Pohang Earthquake. Especially, researches on strategic securing of site survey datasets and understanding the site-specific site response characteristics were conducted for Gyeonggi-do, South Korea. In this study, a GIS-based framework for site-specific assessment of site response and induced vulnerable area in Gyeonggi-do, South Korea was proposed. Geo-Data based on GIS platform was constructed for regional estimation of geotechnical characteristics by collecting borehole and land coverage datasets. And the geo-spatial grid information was developed for deriving spatial distribution of geotechnical layer and site response parameters based on the optimization of the geostatistical interpolation method. Accordingly, base information for Improving earthquake preparedness measures was derived as seismic zonation map with administrative sub-units considering the quantitative site effect of Gyeonggi-do.

• Korean Journal of Remote Sensing
• /
• v.25 no.5
• /
• pp.445-454
• /
• 2009

Localized unprecedented torrential rain and heavy rainfall cause repeated damages and make it difficult to detect and predict the landslide caused by heavy rainfall. To analyze the landslide characteristics of Inje area this study used satellite images photographed after the occurrence of landslide caused by the typhoon Ewiniar occurred in July, 2006, and for GIS analysis purpose, interpreted the satellite images (SPOT5) visually to digitize into developing parts, water traveling parts and sediment parts. For analysis of spatial characteristics, landslide areas obtained from visual interpretation of digital map, 3rd & 4th forest vegetation maps and detailed soil map and grids were overlaid and analyzed. As a result, in regard to topographic features, landslide occurred at places, of which average slope is $26.34^{\circ}$, had south, south-east, south-west aspects and average altitude of 627m. From hydrological analysis, it was found out that water traveling area rapidly spread approaching water traveling area and sediment area. From forest type analysis, it was found out that landslide occurrence was high in pine woods, and in terms of girth class attribute, landslide occurred in small-sized woods, in which the crown occupancy of trees that have the diameter at breast height, 6~16cm, was greater than 50%. From the analysis of soil series, landslide areas constitute 37.85% of OdF and 37.35% of SmF, which had sandy loam soil and excellent drainage capacity. Through this study, landslides in Inje area were characterized and SPOT5 images of 2.5m resolution could be used. But there was a difficulty in determining water traveling parts adjacent to urban area.

• The Journal of Sustainable Design and Educational Environment Research
• /
• v.22 no.1
• /
• pp.1-12
• /
• 2023

With the possibility of preventing crime through environmental design, CPTED guidelines have been introduced and applied to various places. However, although guidelines may be a useful design tool, there are also limitations to referencing it in the early conceptual phase of school architecture. Therefore, the purpose of this study is to examine the concept of "prospect and refuge", which serves as the basis of CPTED, and derives architectural characteristics and application methods based on the concept. For the case study, this research selected six small to medium-scale elementary schools with outstanding creative ideas built within the last 10 years. The results showed that the spatial characteristics of the "prospect" can be achieved by organizing the three-dimensionality of the space, vista prospect, and design attention on circulation areas. The concept of "refuge" was realized through the segmentation of the mass and spatial enclosure. Although the subjects had different social conditions and educational directions in Korea, this study may be used as a theoretical framework for designing a safe school environment.

• Journal of KIISE:Computing Practices and Letters
• /
• v.13 no.7
• /
• pp.488-498
• /
• 2007

This paper presents a novel approach for representing the spatio-temporal topology of the camera network with overlapping and non-overlapping fields of view (FOVs) in Ubiquitous Smart Space (USS). The topology is determined by tracking moving objects and establishing object correspondence across multiple cameras. To track people successfully in multiple camera views, we used the Merge-Split (MS) approach for object occlusion in a single camera and the grid-based approach for extracting the accurate object feature. In addition, we considered the appearance of people and the transition time between entry and exit zones for tracking objects across blind regions of multiple cameras with non-overlapping FOVs. The main contribution of this paper is to estimate transition times between various entry and exit zones, and to graphically represent the camera topology as an undirected weighted graph using the transition probabilities.