• 대한기계학회논문집A
• /
• 제39권10호
• /
• pp.963-970
• /
• 2015

다양한 분야에서 금속 재료의 우수한 기계적 특성을 위해 경량화는 필수적이다. 최근에는 보다 효율적인 차체 경량화와 함께 내충격성 강화를 위하여 금속 부품 대신에 섬유 금속 적층판을 이용하는 연구가 활발히 진행되고 있다. 경량화를 위해서 자동차 및 항공기에서 복합재료나 샌드위치 구조로 이루어진 섬유 금속 적층판이 유용하다. 하지만, 섬유 금속 적층판 형태에 따른 기계적 특성이 도출되지 않은 실정이다. 본 논문에서는 적층판 두께 조합에 따른 특성 비교를 위하여 두께를 인자로 하고, 섬유 금속 적층판의 완전 요인 배치법으로 실험을 계획한다. 또한 유한요소 해석을 사용하여 알루미늄 판과 섬유 금속 적층판을 탄성과 소성 해석을 한다. 이를 통해 적층판 두께 조합에 따른 섬유 금속 적층판 형태에 따른 기계적 특성을 분석하고, 굽힘 대변형 거동을 예측하는 유한요소 해석모델을 구축한다.

• 마이크로전자및패키징학회지
• /
• 제11권4호
• /
• pp.13-22
• /
• 2004

MEMS 소자의 패키지는 일반적으로 패키징 과정에서 큰 온도변화를 받게 되는데, 이에 의한 패키지의 변형은 패키지 및 소자의 신뢰성에 큰 영향을 미칠 수 있다. 본 논문에서는 진동형 MEMS 자이로스코프 센서의 패키지를 대상으로 하여, 온도변화로 인한 열변형 거동에 대한 광학실험과 해석을 수행하였다. 이를 위하여 실시간 모아레 간섭계를 이용하여 각 온도단계에서 변위분포를 나타내는 간섭무늬를 얻고, 그로부터 MEMS 패키지의 굽힘변형 거동 및 인장변형에 대한 해석을 수행하였다. MEMS 칩과 EMC 및 PCB의 열팽창계수 차이로 인하여 패키지는 $125^{\circ}C$ 이하에서는 전체적으로 아래로 볼록한 굽힘변형이 발생하였으며, 온도 $140^{\circ}C$를 정점으로 그 이상의 온도에서는 반대의 굽힘변형이 발생하였다. MEMS의 주파수에 영향을 줄 수 있는 칩 자체의 수축변형률은 약 $481{\times}10^{-6}$로 측정되어서 MEMS 설계시 이를 고려하여야 함을 알 수 있다.

• 대한기계학회논문집A
• /
• 제22권2호
• /
• pp.416-427
• /
• 1998

Unidirectional commingled-yarn-based carbon fiber(CF)/polyamide(PA) 6 composite was fabricated under molding pressures of 0.4, 0.6 and 1.0 MPa to study its flexural deformation and fracture behavior. Fiber/matrix interfacial bonding area became larger with an increase of molding pressure from 0.4 to 0.6 MPa. For molding pressures .geq. 0.6 MPa, good flexural performance of similar magnitudes was attained. For the fracture test, four kinds of notch direction were adopted : edgewise notches parallel (L) and transverse (T) to the major direction of fiber bundles, and flatwise notches parallel(ZL) and perpendicular(ZT) to this direction. Nominal bend strength for L and ZL specimens exhibited high sensitivity to notching. ZL specimens revealed the lowest values of the critical stress intensity factor $K_c$ which was slightly superior to those of unfilled PA6 matrix. Enlargement of the compression area for T specimens was analyzed by means of the rigidity reduction resulting from the fracture occurrence.

• 대한기계학회논문집A
• /
• 제22권1호
• /
• pp.160-169
• /
• 1998

The purpose of this study for the prediction of fatigue crack propagation behavior, Stress Intensity Factor(F) of round bar with 3-Dimensional half circular, semi-elliptical icro surface crack under rotary bending stress for the variable aspect, size, rotation angle was analyzed by Boundary Element Method (BEM). It is predicted that behavior of crack growth is half circular or circular crack (b/a.geq.1) and propagate to b/a.leq.0.85.

• 한국안전학회지
• /
• 제20권2호
• /
• pp.18-25
• /
• 2005

This study performed finite element analysis on the pipe bend with various bend angles under loading conditions of internal pressure and combined pressure and bending, to investigate the effect of bend angle on the collapse behavior of pipe bend and on the stress state in the bend region. In the analysis, the pipe bends with bend angle of $5\~90^{\circ}$ were considered, and the bending moment was applied as in-plane closing and opening modes. From the results of analysis, it was found that the collapse moment of pipe bend increases with decreasing bend angle. As the bend angle decreases, also, the equivalent stress at intrados region increases regardless of bending mode. Under closing mode bending especially, the increase in stress at intrados is significant so that the maximum stress region moves from crown to intrados with decreasing bend angle.

• 대한기계학회논문집A
• /
• 제27권12호
• /
• pp.2011-2018
• /
• 2003

To analyze the bending collapse behavior of an aluminum square tube beam under a bending load, a finite element simulation for the four-point bending test has been performed. Using an aluminum tube beam specimen partly inserted with two steel bars, the local buckling deformation near the center of the tube beam was induced. The maximum bending load and the bending collapse behavior obtained from the numerical simulation were in good agreement with experimental results. Using a combination of the four-point bending test and its finite element simulation, analysis of the local buckling and the accompanied bending collapse behavior of aluminum tube beam could be quantitative accomplished.

• 한국의류학회지
• /
• 제18권4호
• /
• pp.443-451
• /
• 1994

The bending rigidity of yarn is derived in terms of physicil and mechanical characteristics of its constituent fibers and yarns structural parametrs. Theoretical analysis shows that the twist correcti on factor for the bending rigidity of yarn decreases with increase of the ratio of Young's m()dulus to the shear modulus of the constituent fibers. Also, the bending rigidity of yarn decreases as the surface helix angle of yarn increases.

• 대한기계학회논문집A
• /
• 제31권8호
• /
• pp.896-902
• /
• 2007

The tunnel stability concerned with safety is very important in coal production process. The tunnel supports made by the GI beam has been used in domestic coal mine tunnels, and the GI beam was connected with another by the fish plate. It is necessary to analysis for the bending problems of the fish plate due to the rock pressure in some domestic mine tunnels. Therefore, this study proposes the application possibility of the optimization algorithms for the problem searching a load condition that bring about bending problem in tunnels. Consequently, in order to investigate the load conditions, desirability function as one of the optimization methods to study the bending behavior of tunnel supports was applied.

• 대한기계학회논문집
• /
• 제19권9호
• /
• pp.2071-2081
• /
• 1995

In order to examine the effects of yield stress, tensile strength and thickness on the buckling behavior during bending of pipes, the nonlinear finite element analysis of the 3-point bending tests was carried out using the commercial software (ABAQUS) under the condition of L4(2$^{3}$) performed according to the designed condition. Form the analysis of simulation results, it was found that yield stress and thickness were the major factors on buckling load at pipe bending and tensile strength gave little influence because the plastic strain and plastic zone are small. For the punch displacement to the occurrence of buckling, thickness is a major factor and yield stress and tensile strength are the minor factors.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.268-273
• /
• 2004

This study is conducted to clarify the effect of internal pressure on the deformation and collapse behaviors of wall thinned elbow under in-plane bending moment. Thus the nonlinear three-dmensional finite element analyses were performed to obtain the moment-rotation curve of elbow contatining various wall thinning defects located at intrados and extrados under in-plane bending (closing and opening modes) with internal pressure of $0{\sim}15MPa.$ From the results of analysis, the effect of internal of collapse moment of elbow on the global deformation behavior of wall thinned elbow was discussed, and the dependence of collapse moment of elbow on the magnitude of internal pressure was investigated under different loading mode, defect location, and defect shape.