• The Transactions of the Korean Institute of Power Electronics
• /
• v.15 no.1
• /
• pp.9-16
• /
• 2010

This paper presents supervisor control methods at a matrix converter controlled overhead crane system based on a controller area network (CAN). Four induction motors are used to drive the gantry, trolley, and hoist at he crane and each motor is controlled by the matrix converter with direct torque control (DTC). Both the position control algorithm and the supervisor control system using CAN are introduced. Simulation and experimental results are carried out to verify the performance of position control at the matrix converter controlled crane system.

• Aerospace Engineering and Technology
• /
• v.3 no.2
• /
• pp.56-64
• /
• 2004

In this research, design results of computer hardware which control solid motor movable nozzle thrust vector control(TVC) actuator for Korea Space Launch Vehicle I(KSLV-I) are described. TVC computer hardware is the equipment which has jobs for receiving control commands from Navigation Guidance Unit(NGU) and then actuating TVC actuator. Also, it has ability to communicate with other on board or ground equipments. Computer hardware has a digital signal processor as the main processor which is capable of high speed calculating ability of control algorithm, so it can have more stability, reliability and flexibility than the previous analog controller of KSR-III. Target board was designed for on board program development and then first prototype hardware was developed. Top level system design criteria, hardware configurations and ground support equipment of TVC computer system are described.

• Aerospace Engineering and Technology
• /
• v.7 no.2
• /
• pp.53-57
• /
• 2008

In this article, we discuss steering laws for control moment gyro cluster, which have been studied on the project, "Development of control moment gyro engineering model for middle-size spacecraft", supported by Ministry of Knowledge Economy, Korea. We compare performance of MP, SR, SR Escape/Avoidance steering laws and check each law's performance by simulations and experiments.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.8 no.3
• /
• pp.285-291
• /
• 2003

Switched reluctance machine has much attention as a traction drive because of high efficiency, high power and DC series torque characteristics. But the motor has to have a regenerative mode when it is adopted in electric vehicle and current divergence during the regeneration makes difficulties in the control. This paper proposes a reference current limitation strategy for a stable regeneration based on simulations and experimented tests. The motor is operated with conventional current limit and switching angle control method in motoring mode. Simulations and experiments are excuted to verify the feasibility of the proposed method.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2000.06a
• /
• pp.1570-1576
• /
• 2000

하드디스크의 고용량화 추세에 따라 헤드의 정밀한 위치제어를 위한 큰 대역폭의 트랙추적 서보 시스템의 필요성이 대두되고 있다. 이에 작은 신호의 마찰을 제거하고 대역폭을 높이는 방법 중 하나인 2단구동기 트랙추적제어를 실시하여 큰 대역폭의 트랙 추적 서보시스템을 구성하는 방법에 대해 연구하였다. 2단구동기는 조동구동기(기존 하드디스크의 VCM)와 전단형 압전체를 부착한 미동구동기로 구성하였다. 미동구동기의 Hinge구조는 트랙 방향의 공진 주파수와 출력변위를 만족시키기 위한 구조로 설계하였다. 제어기는 notch filter와 PI 보상기를 사용하는 조동구동기와 notch filter와 PD 보상기를 사용하는 미동구동기를 다양한 구조로 구성한 것들을 비교하였다. 2단구동기는 VCM만을 사용하여 트랙 추적을 할 때보다 트랙 편심을 잘 추적하며, 기계적 공진과 VCM의 비선형성에 의해 제한된 대역폭을 개선시키는 효율적인 방법임을 확인하였다.

• Proceedings of the KIEE Conference
• /
• 2006.07b
• /
• pp.703-704
• /
• 2006

본 논문은 슬립 주파수형 벡터제어에 기초하여 인버터 구동 교류 서보전동기 속도제어 시스템을 구성하고 광범위한 속도제어 방법에 대하여 나타내었다. 구동 시스템은 16비트 CPU(V50)을 이용한 디지털 제어기와 전동기 구동 전원으로 순시전류 추종방식 인버터(Current Source Inverter)로 구성된다. 실제 300[W] 유도전동기의 저속에서 속도 변동(진동)이 발생하는 원인을 해석하기 위해서 회로 동작을 소프트웨어와 하드웨어적으로 조사한다. 시뮬레이션을 하여 저속에서 속도변동 원인을 구명하고 그 대책에 대하여 나타내었다.

• Proceedings of the KIPE Conference
• /
• 2013.07a
• /
• pp.307-308
• /
• 2013

기존 LED(Light Emitting Diode) 백라이트 LCD(Liquid Crystal Display) TV 용 전원 장치는 다중출력 플라이백 컨버터를 사용하여 로직 보드, 영상 보드, LED 백라이트 등의 구동에 필요한 다양한 전원들을 생성, 공급한다. 특히, 기존에는 LED 백라이트의 구동을 위한 출력단에는 부스트 컨버터를 추가하여 LED 전류를 제어하였다. 따라서, 부스트 컨버터에 의한 부피 및 원가가 증가하는 단점이 있었다. 본 논문에서는 부스트 컨버터 없이 보조 스위치 하나만을 사용한 LED 구동회로를 이용하여 LED의 정전류 제어가 가능한 저 가격형 LED 구동회로의 비동기식 제어방법을 제안한다. 최종적으로 제안 회로를 32인치 LCD TV 용 LED 백라이트에 적용하여 그 실험 결과를 바탕으로 제안 회로의 타당성을 검증하였다.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.14 no.5
• /
• pp.598-603
• /
• 2004

An optical head actuator of an optical disk drive consists of two servo mechanisms for the focusing and the tracking to acquire data from disk. As the rotational speed of the disk grows, the utilized lag-lead-lead compensator has known to be above its ability for precisely controlling the optical head actuator. To overcome the difficulty, this paper propose a new controller design method for optical head actuator based fuzzy proportional-integral-derivative (PID) control and the genetic algorithm(GA). It employs a two-stage control structure with a fuzzy PI and a fuzzy PD control and is optimized by the GA to yield the suboptimal fuzzy PID control performance. It is shown the feasibility of the proposed method through a numerical tracking actuator simulation.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.2
• /
• pp.235-242
• /
• 2017

A driving controller for active destruction protections can be applied to machinery, aerospace and military fields. In particular, this controller can be used to track and attack enemy flying objects through the active control. It is important to ensure reliability of the driving controller since its operation should be kept with precision to the target point. The temperature of the environment where the driving controller is used is about -32 C ~ 50 C (241~323 ). Heat generated in the driving controller should be maintained below a certain threshold (85 C (358 )) to ensure reliability; therefore, the study and analysis of the heat flow characteristics in the driving controller are required. In this research, commercial software Solid-Works Flow Simulation was used for the numerical simulation assuming a low Reynolds number turbulence model and an incompressible viscous flow. The goal of this paper is to design the driving controller safely by analyzing the characteristics of the heat flow inside of the controller composed of chips or boards. Our analysis shows temperature distributions for boards and chips below a certain threshold.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.8 no.4
• /
• pp.321-327
• /
• 2003

As the continuous casting process is to product slab with high temperature liquid steel, the main role of strand driven roll is to withdraw slab from mold as operator set up casting speed pattern. The strand driven roll in old cast machine is controlled casting speed only. Due to inaccuracies in drive setting up, varying roll diameters, bulging in the product, withdrawal force was distributed irregularly. As a result, because of horizontal crack in slab comer, high casting speed can't be achieved. In this paper, the correlation between the distribution of withdrawal force and slab quality is investigated and the new control algorithm which can be distributed regularly the withdrawal force of strand driven roll is proposed. The principle of proposed algorithm is not to control motor torque directly but to control motor speed reference according to sharing ratio of withdrawal force which is set up in high level controller. The proposed algorithm implemented in POSCO Kwangyang 1-4 continuous casting plant.