• Economic and Environmental Geology
• /
• v.35 no.4
• /
• pp.347-353
• /
• 2002

Dominant rock types of stones used presently for cooking utensils in Korea are pyroxenite, breccia and biotite diorite. Pyroxenite and biotite diorite relatively abundant in mafic minerals have higher specific gravities of 3.0 than breccia of 2.5. Breccia shows the highest absorption (2.9%) among three stones used as cooking utensils and pH value of three stone types shows the alkaline range of 9.7 to 9.9. Among the studied stones used for cooking utensils, biotite diorite is the most durable against abrasion and has the highest strength and therefore, it is expected to be used effectively for the longest time except for other specific causes. Heavy metals such as Cu, Pb, Co, Cr and Ni were leached lower than their detection limit (0.1 ppm) regardless of reaction time and initial pH value of solution. But the leached contents of Fe are various with rock types and leaching conditions and those by acidic solution are generally 1.8 to 31 times higher than those by neutral solution. Breccia and biotite diorite show the highest leached content of Fe in cases of neutral and acidic solutions, respectively. Standard criteria of leached heavy metals and macrominerals should be studied thoroughly to utilize stones for cooking utensils of high quality which are harmless to the human body. Also it is required to examine mon detailed abiochemical properties of various stone types used for cooking utensils.

• Economic and Environmental Geology
• /
• v.30 no.4
• /
• pp.279-289
• /
• 1997

Dark to pale green-colored, Cr-bearing sericites from hydrothermal alteration zone of the Narim gold deposit were investigated mineralogically and geochemically. The alteration zone is composed mineralogically of quartz, carbonate minerals and green sericite with minor amounts of chlorite, barite and sulfide minerals (pyrite, sphalerite, galena). The zone is enriched in As (967 to 1520 ppm), Cu (31 to 289 ppm), Ni (1027 to 1205 ppm), Pb (0.20 to 1.24 wt.%) and Zn (1.03 to 1.07 wt. %) compared with fresh rocks such as granitic gneiss, porphyritic biotite granite and basic dyke. The Cr, probably the chromophore element, is highly enriched in the alteration zone (1140 to 1500 ppm), host granitic gneiss (1200 ppm) and porphyritic biotite granite (1200 ppm). Occurrence and grain size of sericite are diverse, but most of the Cr-bearing sericites (150 to $200{\mu}m$ long and 20 to $30{\mu}m$ wide) occur along the boundaries between ore veins and host rocks (especially basic dyke and granitic gneiss). X-ray diffraction data of the sericite show its monoclinic form with unit-cell parameters of $a=5.202{\AA}$, $b=8.994{\AA}$, $c=20.103{\AA}$, ${\beta}=95.746^{\circ}$ and $V=935.83{\AA}^3$, which are similar with the normal 2M1-type muscovite. Representative chemical formula of the sericite is ($K_{1.54}Ca_{0.03}Na_{0.01}$)($Al_{3.42}Mg_{0.38}Cr_{0.14}Fe_{0.06}V_{0.02}$)($Si_{6.69}Al_{1.31}$)$O_{20}(OH)_4$. The Cr content increases with decrease of the octahedral Al content, and ranges from 0.36 to 2.58 wt.%. DTA and TG curves of the sericite show endothermic peaks at $342^{\circ}$ to $510^{\circ}$, $716^{\circ}$ to $853^{\circ}$ and $1021^{\circ}C$, which are due to the expulsion of hydroxyl group. The total weight loss by heating is measured to be about 8.8 wt. %, especially at $730^{\circ}C$. Infrared absorption experiments of the sericite show broad absorption band due to the O-H bond stretching vibration near the $3625cm^{-1}$, coupled with the 825 and $750cm^{-1}$ doublet. The vibration bands related with the H-O-Al and Si-O-Al bonds occur at $1030cm^{-1}$ and 500 to $700cm^{-1}$, respectively. Based on paragonite content of the sericite, the formation temperature of the Narim gold deposit is calculated to be $220{\pm}10^{\circ}C$.

• Economic and Environmental Geology
• /
• v.44 no.5
• /
• pp.387-397
• /
• 2011

In this study, we conducted the study of the merits and demerits of the laser flash and the divided-bar methods for measuring the thermal conductivity of rocks and investigated applicability of the divided-bar apparatus which was developed by KIGAM. The laser flash method can measure thermal diffusivity, specific heat capacity, and thermal conductivity of rocks with even small thickness (< ~3 mm) in the high temperature range($25-200^{\circ}C$) in non-contact mode. For the laser flash method, samples must be uniform and homogeneous. In the case of the divided-bar method, the apparatus measures only thermal conductivity of rock samples at the room temperature. We measured thermal conductivities of 12 rock samples with low density and high porosity using two methods. In the laser flash method, there exist potential errors caused by the effect of pulse dispersion and reflection by various minerals and porosity in rock samples; the difference in thermal conductivity values measured on the front surface and the opposite surface ranges from 0.001 to 0.140 W/mK with the standard deviation of 0.003~0.089 W/mK, which seems to be caused by heterogeneity of rock samples. On the contrary, the divided-bar apparatus shows stable thermal conductivity measurements and relatively small measurement errors; the difference in thermal conductivity values, just as we applied to the laser frash method, is 0.001~0.016 W/mK with the standard deviation 0.001~0.034 W/mK. In turn, the divided-bar method can be applied to more thick samples that are more representative of bulk thermal conductivity.

• Economic and Environmental Geology
• /
• v.42 no.4
• /
• pp.301-314
• /
• 2009

The Taebaeksan mineralized province, which is the most important one in South Korea, is rich in zinc-lead-tungsten-iron-copper-molybdenum-silver-gold mineral resources and has a diversity of deposit styles. These deposits principally coexist in time and space with porphyry-related epigenetic deposit such as skarn, hydrothermal replacement, mesothermal vein, and Carlin-like deposits. The magmatic-hydrothermal systems in the Taebaek fold belt is genetically characterized by the Bulguksa subvolcanic rocks(ca. $110{\sim}50\;Ma$) related to northwestward subduction of the paleo-Pacific Plate. The most important zinc-lead deposits in the area are the Uljin, Yeonhwa II and Shinyemi skarn, the Janggun hydrothermal replacement, and the Yeonhwa I intermediate-mixed (skarn/hydrothermal replacement) ones. In the present study, we present a compilation of metal production and mineral assemblage of the zinc-lead deposits. The metal difference of deposit styles in the area indicates a cooling path from intermediate-sulfidation to low-sulfidation state in the polymetallic hydrothermal system, reflecting spatial proximity to a magmatic source.

• Economic and Environmental Geology
• /
• v.41 no.2
• /
• pp.165-172
• /
• 2008

Kaolinite [$Al_2Si_2O_5(OH)_4$] used in these experiments was synthesized at 250$^{\circ}C$ for 36 hrs by a hydrothermal process from amorphous $Al(OH)_3$ and $SiO_2$. The change of the mineralogical properties of the phase synthesized were observed in the pH range 2 to 9. The synthetic kaolinite were characterized by the analytical methods of XRD, IR, DIA, and FE-SEM. Kaolinite was obtained in a wide range of pH. The phases with high- to midium- defect kaolinite with high thermal stability were obtained from the acidic conditions and high-defect kaolinite with low thermal stability from the basic conditions. These variations of kaolinite properties appears to be related to the pH dependence of kaolinite surface speciation. The peaks intensity and resolution of the kaolinite decrease according to the alkalinity of the solution by the results of the IR testing. And the peak intensity increases in the 60 to 70$^{\circ}C$ range due to dehydration reaction observed by TG-DTA. Such phenomena was the result of increase of unreacted amorphous materials in the high pH condition, which could be identified by FE-SEM.

• Economic and Environmental Geology
• /
• v.50 no.1
• /
• pp.27-34
• /
• 2017

Mineral carbonation for the storage of carbon dioxide is a CCS option that provides an alternative for the more widely advocated method of geological storage in underground formation. Carbonation of magnesium- or calcium-based minerals, especially the carbonation of waste materials and industrial by-products is expanding, even though total amounts of the industrial waste are too small to substantially reduce the $CO_2$ emissions. The mineral carbonation was performed with steelmaking reduction slag as starting material. The steelmaking reduction slag dissolution experiments were conducted in the $H_2SO_4$ and $NH_4NO_3$ solution with concentration range of 0.3 to 1 M at $100^{\circ}C$ and $150^{\circ}C$. The hydrothermal treatment was performed to the starting material via a modified direct aqueous carbonation process at the same leaching temperature. The initial pH of the solution was adjusted to 12 and $CO_2$ partial pressure was 1MPa for the carbonation. The carbonation rate after extracting $Ca^^{2+}$ under $NH_4NO_3$ was higher than that under $H_2SO_4$ and the carbonation rates in 1M $NH_4NO_3$ solution at $150^{\circ}C$ was dramatically enhanced about 93%. In this condition well-faceted rhombohedral calcite, and rod or flower-shaped aragonite were appeared together in products. As the concentration of $H_2SO_4$ increased, the formation of gypsum was predominant and the carbonation rate decreased sharply. Therefore it is considered that the selection of the leaching solution which does not affect the starting material is important in the carbonation reaction.

• Economic and Environmental Geology
• /
• v.50 no.1
• /
• pp.15-26
• /
• 2017

Advanced argillic, argillic, and phyllic zones are the most important alteration patterns to predict the hidden ore body during exploration of hydrothermal deposits. We examined the quantitative relationship between the spectral absorption characteristics and the mineral content of the synthetic mixtures such as alunite-kaolinite and illite-kaolinite using short wavelength infrared (SWIR) spectroscopy. In the alunite-kaolinite mixtures, the spectral absorption characteristics of the alunite was highly correlated with the Hull quotient reflectance(0.99) and the kaolinite had the highest correlation with the Gaussian peak(0.92). Illite-kaolinite mixtures are essential for Gaussian deconvolution because of the overlap of absorption region. Illite and kaolinite mixtures indicate the high correlation of 0.93 and 0.98, respectively. The error ranges in the alunite-kaolinite(8%) and illite-kaolinite mixtures(5%) derived from SWIR were smaller than the ones(29% and 26%) obtained from X-ray diffraction(Rietveld) analysis. These results show that SWIR spectroscopic analysis is more reliable than XRD Rietveld analysis in terms of quantification of allowed minerals.

• Economic and Environmental Geology
• /
• v.51 no.1
• /
• pp.49-65
• /
• 2018

The lime-soil mixture on tomb barrier (LSMB) is a type of tomb in Joseon Dynasty, which made with so-called 'Sammul' (three material compound) that mixture of lime, fine sand and yellow ocher. This study divided the tombs of the Gungri Site from Joseon Dynasty with layered wall and integrated wall according to the manufacturing types, and investigated on the basis of analysis to material characteristics and making techniques. Analytical samples were classified with lime-soil mixtures and soils, and interpreted the mixing characteristics of Sammul based on types of tomb barrier. The tomb barrier which is directly effect to control the inner environment was made with high content of lime. But the finishing or bottom layer were made with low content of lime. Overall the LSMB with integrated wall has higher content of lime and physical property than the LSMB with layered wall. The soil which was compounded as a Sammul and collected near the Gungri Site had similar with mineralogical and geochemical characteristics. Therefore, it is presumed that the fine sand and yellow ocher that made as a Sammul, were used with soil that was distributed around the site. Meanwhile, large scale limestone quarry is distributed near the site. Especially, Gungri Site has a possibility of material supply through water transport, due to the sea route from Asan bay is connected near the site. Thus, there is the possibility of transportation of lime materials from nearby quarry.

• Economic and Environmental Geology
• /
• v.7 no.2
• /
• pp.45-62
• /
• 1974

Scheelite deposits in Sangdong mine are divided into three parallel vein groups, namely "Hanging-wall vein" which is located in the lowest parts of Pungchon Limestone, "Main vein" the most productive vein replaced a intercalated limestone bed in Myobong slate, "Foot-wall veins" a group of several thin veins parallel to main vein in Myobong slate. Besides the above, there are many productive quartz veins imbedded in the above veins and Myobong slate. Molybdenite and wolframite are barren in the former three veins group but associates only in quartz veins. Both main vein and foot-wall veins show regular zonal distribution, quartz rich zone in the center, hornblende rich zone surrounding the quartz rich zone and diopside rich zone in the further outside to the marginal parts of the vein. According to the distribution of three main minerals, quartz, hornblende and diopside the main vein can be divided into three zones which are in turn grouped into 7 subzones by distinct mineral paragenesis. They are summerized as follows: A. Diopside rich zone: 1. garnet-diopside.fl.uorite subzone 2. diopside-zoisite-quartz subzone 3. diopside-plagioclase subzone B. Hornblende rich zone: 4. hornblende-diopside-quartz subzone 5. hornblende-quartz-chlorite subzone 6. hornblende-plagioclase-quartz.sphene subzone C. Quartz rich zone: 7. quartz-mica-chlorite subzone The foot-wall veins can similarly be divided by mineral paragenesis into 3 zones, 6 subzones as follows: A. diopside rich zone: 1. garnet-diopside-quartz.fl.uorite subzone 2. garnet-diopside-wollastonite subzone B. Hornblende rich zone: 3. quartz-hornblende-chlorite subzone 4. hornblende-plagioclase-quartz subzone 5. hornblende-diopside-quartz subzone C. Quartz rich zone: 6. quartz-mica subzone The hanging-wall vein is generally grouped into 9 subzones by the mineral paragenesis which show random distribution. They are as follows: 1. diopside-garnet-fluorite subzone 2. diopside-zoisite-quartz subzone 3. diopside-hornblende-quartz-fluorite subzone 4. wollastonite-garnet-diopside subzone 5. hornblende-chlorite-quartz subzone 6. quartz-plagioclase-hornblende-sphene subzone 7. quartz-biotite subzone 8. quartz-calcite subzone 9. calcite-altered minerals subzone Among many composing minerals, garnet specially shows characteristic distribution and optical properties. Anisotropic and euhedral grossularite is generally distributed in the hanging wall vein and lower parts of the main vein, whereas isotropic and anhedral andradite in the upper parts of the main vein. Plagioclase (anorthite) and sphene are distributed ony near the foot-wall side of the aboveveins. wollastonite is a characteristic mineral in upper parts of the hang-wall vein. Molybdenite is distributed in the upper parts of quartz veins and wolframite in lower parts of quartz veins.

• Economic and Environmental Geology
• /
• v.26 no.2
• /
• pp.187-191
• /
• 1993

FT dating of twelve zircon concentrates was carried out on the igneous rocks in the study area. The FT results from this study are younger than those of Rb-Sr or K-Ar by 20Ma, probably, due to the different closing temperature of the minerals. The obtained ages are $161{\pm}11Ma$ to $150{\pm}10Ma$ for the gneissose granodiorite and the Geochang granodiorite. It is estimated that the intermediate and basic rocks were formed at twice: one from $148{\pm}13Ma$ to $144{\pm}8Ma$, and the other from $122{\pm}8Ma$ to $104{\pm}7Ma$. In the case of the Gajo granite, the age is $96.5{\pm}5.7Ma$ to $95.4{\pm}6.4Ma$. Although considering the fact that the FT age is younger than the K-Ar age, it is likely that the magmatism in the Jurassic period was most intense in the area, which was associated with the Daebo orogeny.